From: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
To: Simon Ser <simon.ser@intel.com>,
Ville Syrjala <ville.syrjala@linux.intel.com>,
Shayenne Moura <shayenneluzmoura@gmail.com>,
Haneen Mohammed <hamohammed.sa@gmail.com>,
Daniel Vetter <daniel@ffwll.ch>, David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
18oliveira.charles@gmail.com
Subject: [PATCH V2] drm/vkms: Avoid extra discount in the timestamp value
Date: Tue, 4 Jun 2019 23:45:43 -0300 [thread overview]
Message-ID: <20190605024543.pcsnkf74mmgfhtuh@smtp.gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 3305 bytes --]
After the commit def35e7c5926 ("drm/vkms: Bugfix extra vblank frame")
some of the crc tests started to fail in the vkms with the following
error:
[drm:drm_crtc_add_crc_entry [drm]] *ERROR* Overflow of CRC buffer,
userspace reads too slow.
[drm] failed to queue vkms_crc_work_handle
...
The aforementioned commit fixed the extra vblank added by
`drm_crtc_arm_vblank_event()` which is invoked inside
`vkms_crtc_atomic_flush()` if the vblank event count was zero, otherwise
`drm_crtc_send_vblank_event()` is invoked. The fix was implemented in
`vkms_get_vblank_timestamp()` by subtracting one period from the current
timestamp, as the code snippet below illustrates:
if (!in_vblank_irq)
*vblank_time -= output->period_ns;
The above fix works well when `drm_crtc_arm_vblank_event()` is invoked.
However, it does not properly work when `drm_crtc_send_vblank_event()`
executes since it subtracts the correct timestamp, which it shouldn't.
In this case, the `drm_crtc_accurate_vblank_count()` function will
returns the wrong frame number, which generates the aforementioned
error. Such decrease in `get_vblank_timestamp()` produce a negative
number in the following calculation within `drm_update_vblank_count()`:
u64 diff_ns = ktime_to_ns(ktime_sub(t_vblank, vblank->time));
After this operation, the DIV_ROUND_CLOSEST_ULL macro is invoked using
diff_ns with a negative number, which generates an undefined result;
therefore, the returned frame is a huge and incorrect number. Finally,
the code below is part of the `vkms_crc_work_handle()`, note that the
while loop depends on the returned value from
`drm_crtc_accurate_vblank_count()` which may cause the loop to take a
long time to finish in case of huge value.
frame_end = drm_crtc_accurate_vblank_count(crtc);
while (frame_start <= frame_end)
drm_crtc_add_crc_entry(crtc, true, frame_start++, &crc32);
This commit fixes this issue by checking if the vblank timestamp
corresponding to the current software vblank counter is equal to the
current vblank; if they are equal, it means that
`drm_crtc_send_vblank_event()` was invoked and vkms does not need to
discount the extra vblank, otherwise, `drm_crtc_arm_vblank_event()` was
executed and vkms have to discount the extra vblank. This fix made the
CRC tests work again whereas keep all tests from kms_flip working as
well.
V2: Update commit message
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com>
---
drivers/gpu/drm/vkms/vkms_crtc.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/vkms/vkms_crtc.c b/drivers/gpu/drm/vkms/vkms_crtc.c
index 7508815fac11..3ce60e66673e 100644
--- a/drivers/gpu/drm/vkms/vkms_crtc.c
+++ b/drivers/gpu/drm/vkms/vkms_crtc.c
@@ -74,9 +74,13 @@ bool vkms_get_vblank_timestamp(struct drm_device *dev, unsigned int pipe,
{
struct vkms_device *vkmsdev = drm_device_to_vkms_device(dev);
struct vkms_output *output = &vkmsdev->output;
+ struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
*vblank_time = output->vblank_hrtimer.node.expires;
+ if (*vblank_time == vblank->time)
+ return true;
+
if (!in_vblank_irq)
*vblank_time -= output->period_ns;
--
2.21.0
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next reply other threads:[~2019-06-05 2:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-05 2:45 Rodrigo Siqueira [this message]
2019-06-05 12:22 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190605024543.pcsnkf74mmgfhtuh@smtp.gmail.com \
--to=rodrigosiqueiramelo@gmail.com \
--cc=18oliveira.charles@gmail.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=hamohammed.sa@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=shayenneluzmoura@gmail.com \
--cc=simon.ser@intel.com \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®