mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jarod Wilson <jarod@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Jarod Wilson <jarod@redhat.com>, Joe Perches <joe@perches.com>,
	Jay Vosburgh <j.vosburgh@gmail.com>,
	Veaceslav Falico <vfalico@gmail.com>,
	Andy Gospodarek <andy@greyhouse.net>,
	netdev@vger.kernel.org
Subject: [PATCH net-next 6/7] bonding/alb: convert to using slave printk macros
Date: Fri,  7 Jun 2019 10:59:31 -0400	[thread overview]
Message-ID: <20190607145933.37058-7-jarod@redhat.com> (raw)
In-Reply-To: <20190607145933.37058-1-jarod@redhat.com>

All of these printk instances benefit from having both master and slave
device information included, so convert to using a standardized macro
format and remove redundant information.

Suggested-by: Joe Perches <joe@perches.com>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
---
 drivers/net/bonding/bond_alb.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 790e41c6fdd0..8c79bad2a9a5 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -300,7 +300,7 @@ static int rlb_arp_recv(const struct sk_buff *skb, struct bonding *bond,
 	if (arp->op_code == htons(ARPOP_REPLY)) {
 		/* update rx hash table for this ARP */
 		rlb_update_entry_from_arp(bond, arp);
-		netdev_dbg(bond->dev, "Server received an ARP Reply from client\n");
+		slave_dbg(bond->dev, slave->dev, "Server received an ARP Reply from client\n");
 	}
 out:
 	return RX_HANDLER_ANOTHER;
@@ -442,8 +442,9 @@ static void rlb_update_client(struct rlb_client_info *client_info)
 				 client_info->slave->dev->dev_addr,
 				 client_info->mac_dst);
 		if (!skb) {
-			netdev_err(client_info->slave->bond->dev,
-				   "failed to create an ARP packet\n");
+			slave_err(client_info->slave->bond->dev,
+				  client_info->slave->dev,
+				  "failed to create an ARP packet\n");
 			continue;
 		}
 
@@ -667,14 +668,15 @@ static struct slave *rlb_arp_xmit(struct sk_buff *skb, struct bonding *bond)
 		if (tx_slave)
 			bond_hw_addr_copy(arp->mac_src, tx_slave->dev->dev_addr,
 					  tx_slave->dev->addr_len);
-		netdev_dbg(bond->dev, "Server sent ARP Reply packet\n");
+		netdev_dbg(bond->dev, "(slave %s): Server sent ARP Reply packet\n",
+			   tx_slave ? tx_slave->dev->name : "NULL");
 	} else if (arp->op_code == htons(ARPOP_REQUEST)) {
 		/* Create an entry in the rx_hashtbl for this client as a
 		 * place holder.
 		 * When the arp reply is received the entry will be updated
 		 * with the correct unicast address of the client.
 		 */
-		rlb_choose_channel(skb, bond);
+		tx_slave = rlb_choose_channel(skb, bond);
 
 		/* The ARP reply packets must be delayed so that
 		 * they can cancel out the influence of the ARP request.
@@ -687,7 +689,8 @@ static struct slave *rlb_arp_xmit(struct sk_buff *skb, struct bonding *bond)
 		 * updated with their assigned mac.
 		 */
 		rlb_req_update_subnet_clients(bond, arp->ip_src);
-		netdev_dbg(bond->dev, "Server sent ARP Request packet\n");
+		netdev_dbg(bond->dev, "(slave %s): Server sent ARP Request packet\n",
+			   tx_slave ? tx_slave->dev->name : "NULL");
 	}
 
 	return tx_slave;
@@ -923,9 +926,8 @@ static void alb_send_lp_vid(struct slave *slave, u8 mac_addr[],
 	skb->priority = TC_PRIO_CONTROL;
 	skb->dev = slave->dev;
 
-	netdev_dbg(slave->bond->dev,
-		   "Send learning packet: dev %s mac %pM vlan %d\n",
-		   slave->dev->name, mac_addr, vid);
+	slave_dbg(slave->bond->dev, slave->dev,
+		  "Send learning packet: mac %pM vlan %d\n", mac_addr, vid);
 
 	if (vid)
 		__vlan_hwaccel_put_tag(skb, vlan_proto, vid);
@@ -1016,8 +1018,7 @@ static int alb_set_slave_mac_addr(struct slave *slave, u8 addr[],
 	memcpy(ss.__data, addr, len);
 	ss.ss_family = dev->type;
 	if (dev_set_mac_address(dev, (struct sockaddr *)&ss, NULL)) {
-		netdev_err(slave->bond->dev, "dev_set_mac_address of dev %s failed! ALB mode requires that the base driver support setting the hw address also when the network device's interface is open\n",
-			   dev->name);
+		slave_err(slave->bond->dev, dev, "dev_set_mac_address on slave failed! ALB mode requires that the base driver support setting the hw address also when the network device's interface is open\n");
 		return -EOPNOTSUPP;
 	}
 	return 0;
@@ -1192,12 +1193,11 @@ static int alb_handle_addr_collision_on_attach(struct bonding *bond, struct slav
 		alb_set_slave_mac_addr(slave, free_mac_slave->perm_hwaddr,
 				       free_mac_slave->dev->addr_len);
 
-		netdev_warn(bond->dev, "the hw address of slave %s is in use by the bond; giving it the hw address of %s\n",
-			    slave->dev->name, free_mac_slave->dev->name);
+		slave_warn(bond->dev, slave->dev, "the slave hw address is in use by the bond; giving it the hw address of %s\n",
+			   free_mac_slave->dev->name);
 
 	} else if (has_bond_addr) {
-		netdev_err(bond->dev, "the hw address of slave %s is in use by the bond; couldn't find a slave with a free hw address to give it (this should not have happened)\n",
-			   slave->dev->name);
+		slave_err(bond->dev, slave->dev, "the slave hw address is in use by the bond; couldn't find a slave with a free hw address to give it (this should not have happened)\n");
 		return -EFAULT;
 	}
 
-- 
2.20.1


  parent reply	other threads:[~2019-06-07 15:00 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-07 14:59 [PATCH net-next 0/7] bonding: clean up and standarize logging printks Jarod Wilson
2019-06-07 14:59 ` [PATCH net-next 1/7] bonding: improve event debug usability Jarod Wilson
2019-06-07 14:59 ` [PATCH net-next 2/7] bonding: fix error messages in bond_do_fail_over_mac Jarod Wilson
2019-06-07 14:59 ` [PATCH net-next 3/7] bonding: add slave_foo printk macros Jarod Wilson
2019-06-07 14:59 ` [PATCH net-next 4/7] bonding/main: convert to using slave " Jarod Wilson
2019-06-07 14:59 ` [PATCH net-next 5/7] bonding/802.3ad: " Jarod Wilson
2019-06-07 14:59 ` Jarod Wilson [this message]
2019-06-07 14:59 ` [PATCH net-next 7/7] bonding/options: " Jarod Wilson
2019-06-07 14:59 ` [PATCH net] bonding: make debugging output more succinct Jarod Wilson
2019-06-07 15:02   ` Jarod Wilson
2019-06-09 20:37     ` David Miller
2019-06-09 20:36 ` [PATCH net-next 0/7] bonding: clean up and standarize logging printks David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190607145933.37058-7-jarod@redhat.com \
    --to=jarod@redhat.com \
    --cc=andy@greyhouse.net \
    --cc=j.vosburgh@gmail.com \
    --cc=joe@perches.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=vfalico@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome