From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <broonie@kernel.org>, <lgirdwood@gmail.com>
Cc: <alsa-devel@alsa-project.org>, <misael.lopez@ti.com>,
<jsarha@ti.com>, <devicetree@vger.kernel.org>,
<robh+dt@kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 0/2] ASoC: ti: davinci-mcasp: Master AUXCLK FS ration support
Date: Tue, 11 Jun 2019 15:29:39 +0300 [thread overview]
Message-ID: <20190611122941.10708-1-peter.ujfalusi@ti.com> (raw)
Hi,
The AUXCLK of McASP which is used as the master clock for I2S signal generation
usually is a static clock.
The driver (and bindings) assumes this setup, however if the AUXCLK can change
with the stream's FS then this assumption breaks the audio support as it sets
constraint rules in startup, these rules run pre hw_params and in hw_params we
are going to be notified of the new reference clock (which is some multiple of
the FS).
Regards,
Peter
---
Peter Ujfalusi (2):
bindings: sound: davinci-mcasp: Add support for optional
auxclk-fs-ratio
ASoC: ti: davinci-mcasp: Support for auxclk-fs-ratio
.../bindings/sound/davinci-mcasp-audio.txt | 3 ++
sound/soc/ti/davinci-mcasp.c | 52 ++++++++++++++++---
2 files changed, 47 insertions(+), 8 deletions(-)
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
next reply other threads:[~2019-06-11 12:29 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-11 12:29 Peter Ujfalusi [this message]
2019-06-11 12:29 ` [PATCH 1/2] bindings: sound: davinci-mcasp: Add support for optional auxclk-fs-ratio Peter Ujfalusi
2019-06-12 15:59 ` Applied "bindings: sound: davinci-mcasp: Add support for optional auxclk-fs-ratio" to the asoc tree Mark Brown
2019-06-11 12:29 ` [PATCH 2/2] ASoC: ti: davinci-mcasp: Support for auxclk-fs-ratio Peter Ujfalusi
2019-06-12 15:59 ` Applied "ASoC: ti: davinci-mcasp: Support for auxclk-fs-ratio" to the asoc tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190611122941.10708-1-peter.ujfalusi@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jsarha@ti.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=misael.lopez@ti.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®