linux-next: manual merge of the battery tree with the mfd tree

[Stephen Rothwell <sfr@canb.auug.org.au>]

[-- Attachment #1: Type: text/plain, Size: 2304 bytes --]

Hi all,

Today's linux-next merge of the battery tree got conflicts in:

  drivers/power/supply/Kconfig
  drivers/power/supply/Makefile

between commit:

  f8c7f7ddd8ef ("power: supply: Initial support for ROHM BD70528 PMIC charger block")

from the mfd tree and commit:

  0736343e4c56 ("power_supply: wilco_ec: Add charging config driver")

from the battery tree.

I fixed it up (see below) and can carry the fix as necessary. This
is now fixed as far as linux-next is concerned, but any non trivial
conflicts should be mentioned to your upstream maintainer when your tree
is submitted for merging.  You may also want to consider cooperating
with the maintainer of the conflicting tree to minimise any particularly
complex conflicts.

-- 
Cheers,
Stephen Rothwell

diff --cc drivers/power/supply/Kconfig
index 4a3cd679295b,4c01598f5ccb..000000000000
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@@ -689,13 -702,13 +703,22 @@@ config CHARGER_UCS100
  	  Say Y to enable support for Microchip UCS1002 Programmable
  	  USB Port Power Controller with Charger Emulation.
  
 +config CHARGER_BD70528
 +	tristate "ROHM bd70528 charger driver"
 +	depends on MFD_ROHM_BD70528
 +	default n
 +	help
 +	 Say Y here to enable support for getting battery status
 +	 information and altering charger configurations from charger
 +	 block of the ROHM BD70528 Power Management IC.
 +
+ config CHARGER_WILCO
+ 	tristate "Wilco EC based charger for ChromeOS"
+ 	depends on WILCO_EC
+ 	help
+ 	  Say Y here to enable control of the charging routines performed
+ 	  by the Embedded Controller on the Chromebook named Wilco. Further
+ 	  information can be found in
+ 	  Documentation/ABI/testing/sysfs-class-power-wilco
+ 
  endif # POWER_SUPPLY
diff --cc drivers/power/supply/Makefile
index 346a8ef5f348,d2263e1e2b6f..000000000000
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@@ -90,4 -91,4 +91,5 @@@ obj-$(CONFIG_CHARGER_CROS_USBPD)	+= cro
  obj-$(CONFIG_CHARGER_SC2731)	+= sc2731_charger.o
  obj-$(CONFIG_FUEL_GAUGE_SC27XX)	+= sc27xx_fuel_gauge.o
  obj-$(CONFIG_CHARGER_UCS1002)	+= ucs1002_power.o
 +obj-$(CONFIG_CHARGER_BD70528)	+= bd70528-charger.o
+ obj-$(CONFIG_CHARGER_WILCO)	+= wilco-charger.o

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]