From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>,
Jesse Brandeburg <jesse.brandeburg@intel.com>,
Andrew Bowers <andrewx.bowers@intel.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
Sasha Levin <sashal@kernel.org>,
netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 4.9 60/73] ixgbe: Check DDM existence in transceiver before access
Date: Mon, 15 Jul 2019 10:36:16 -0400 [thread overview]
Message-ID: <20190715143629.10893-60-sashal@kernel.org> (raw)
In-Reply-To: <20190715143629.10893-1-sashal@kernel.org>
From: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
[ Upstream commit 655c91414579d7bb115a4f7898ee726fc18e0984 ]
Some transceivers may comply with SFF-8472 but not implement the Digital
Diagnostic Monitoring (DDM) interface described in it. The existence of
such area is specified by bit 6 of byte 92, set to 1 if implemented.
Currently, due to not checking this bit ixgbe fails trying to read SFP
module's eeprom with the follow message:
ethtool -m enP51p1s0f0
Cannot get Module EEPROM data: Input/output error
Because it fails to read the additional 256 bytes in which it was assumed
to exist the DDM data.
This issue was noticed using a Mellanox Passive DAC PN 01FT738. The eeprom
data was confirmed by Mellanox as correct and present in other Passive
DACs in from other manufacturers.
Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 3 ++-
drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index a137e060c185..bbc23e88de89 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -3192,7 +3192,8 @@ static int ixgbe_get_module_info(struct net_device *dev,
page_swap = true;
}
- if (sff8472_rev == IXGBE_SFF_SFF_8472_UNSUP || page_swap) {
+ if (sff8472_rev == IXGBE_SFF_SFF_8472_UNSUP || page_swap ||
+ !(addr_mode & IXGBE_SFF_DDM_IMPLEMENTED)) {
/* We have a SFP, but it does not support SFF-8472 */
modinfo->type = ETH_MODULE_SFF_8079;
modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
index cc735ec3e045..25090b4880b3 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
@@ -70,6 +70,7 @@
#define IXGBE_SFF_SOFT_RS_SELECT_10G 0x8
#define IXGBE_SFF_SOFT_RS_SELECT_1G 0x0
#define IXGBE_SFF_ADDRESSING_MODE 0x4
+#define IXGBE_SFF_DDM_IMPLEMENTED 0x40
#define IXGBE_SFF_QSFP_DA_ACTIVE_CABLE 0x1
#define IXGBE_SFF_QSFP_DA_PASSIVE_CABLE 0x8
#define IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE 0x23
--
2.20.1
next prev parent reply other threads:[~2019-07-15 14:40 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-15 14:35 [PATCH AUTOSEL 4.9 01/73] ath10k: Do not send probe response template for mesh Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 02/73] ath9k: Check for errors when reading SREV register Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 03/73] ath6kl: add some bounds checking Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 04/73] ath: DFS JP domain W56 fixed pulse type 3 RADAR detection Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 05/73] batman-adv: fix for leaked TVLV handler Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 06/73] media: dvb: usb: fix use after free in dvb_usb_device_exit Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 07/73] crypto: talitos - fix skcipher failure due to wrong output IV Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 08/73] media: marvell-ccic: fix DMA s/g desc number calculation Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 09/73] media: vpss: fix a potential NULL pointer dereference Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 10/73] media: media_device_enum_links32: clean a reserved field Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 11/73] net: stmmac: dwmac1000: Clear unused address entries Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 12/73] net: stmmac: dwmac4/5: " Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 13/73] signal/pid_namespace: Fix reboot_pid_ns to use send_sig not force_sig Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 14/73] signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 15/73] af_key: fix leaks in key_pol_get_resp and dump_sp Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 16/73] xfrm: Fix xfrm sel prefix length validation Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 17/73] Revert "e1000e: fix cyclic resets at link up with active tx" Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 18/73] e1000e: start network tx queue only when link is up Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 19/73] media: mc-device.c: don't memset __user pointer contents Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 20/73] media: staging: media: davinci_vpfe: - Fix for memory leak if decoder initialization fails Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 21/73] net: phy: Check against net_device being NULL Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 22/73] crypto: talitos - properly handle split ICV Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 23/73] crypto: talitos - Align SEC1 accesses to 32 bits boundaries Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 24/73] tua6100: Avoid build warnings Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 25/73] locking/lockdep: Fix merging of hlocks with non-zero references Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 26/73] media: wl128x: Fix some error handling in fm_v4l2_init_video_device() Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 27/73] cpupower : frequency-set -r option misses the last cpu in related cpu list Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 28/73] net: fec: Do not use netdev messages too early Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 29/73] net: axienet: Fix race condition causing TX hang Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 30/73] s390/qdio: handle PENDING state for QEBSM devices Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 31/73] perf cs-etm: Properly set the value of 'old' and 'head' in snapshot mode Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 32/73] perf test 6: Fix missing kvm module load for s390 Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 33/73] gpio: omap: fix lack of irqstatus_raw0 for OMAP4 Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 34/73] gpio: omap: ensure irq is enabled before wakeup Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 35/73] regmap: fix bulk writes on paged registers Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 36/73] bpf: silence warning messages in core Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 37/73] rcu: Force inlining of rcu_read_lock() Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 38/73] blkcg, writeback: dead memcgs shouldn't contribute to writeback ownership arbitration Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 39/73] xfrm: fix sa selector validation Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 40/73] perf evsel: Make perf_evsel__name() accept a NULL argument Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 41/73] vhost_net: disable zerocopy by default Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 42/73] ipoib: correcly show a VF hardware address Sasha Levin
2019-07-15 14:35 ` [PATCH AUTOSEL 4.9 43/73] EDAC/sysfs: Fix memory leak when creating a csrow object Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 44/73] ipsec: select crypto ciphers for xfrm_algo Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 45/73] media: i2c: fix warning same module names Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 46/73] ntp: Limit TAI-UTC offset Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 47/73] timer_list: Guard procfs specific code Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 48/73] acpi/arm64: ignore 5.1 FADTs that are reported as 5.0 Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 49/73] media: coda: fix mpeg2 sequence number handling Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 50/73] media: coda: increment sequence offset for the last returned frame Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 51/73] mt7601u: do not schedule rx_tasklet when the device has been disconnected Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 52/73] x86/build: Add 'set -e' to mkcapflags.sh to delete broken capflags.c Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 53/73] mt7601u: fix possible memory leak when the device is disconnected Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 54/73] ath10k: fix PCIE device wake up failed Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 55/73] perf tools: Increase MAX_NR_CPUS and MAX_CACHES Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 56/73] libata: don't request sense data on !ZAC ATA devices Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 57/73] clocksource/drivers/exynos_mct: Increase priority over ARM arch timer Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 58/73] rslib: Fix decoding of shortened codes Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 59/73] rslib: Fix handling of of caller provided syndrome Sasha Levin
2019-07-15 14:36 ` Sasha Levin [this message]
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 61/73] crypto: asymmetric_keys - select CRYPTO_HASH where needed Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 62/73] PCI / ACPI: Use cached ACPI device state to get PCI device power state Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 63/73] EDAC: Fix global-out-of-bounds write when setting edac_mc_poll_msec Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 64/73] bcache: check c->gc_thread by IS_ERR_OR_NULL in cache_set_flush() Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 65/73] iwlwifi: mvm: Drop large non sta frames Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 66/73] net: usb: asix: init MAC address buffers Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 67/73] gpiolib: Fix references to gpiod_[gs]et_*value_cansleep() variants Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 68/73] Bluetooth: hci_bcsp: Fix memory leak in rx_skb Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 69/73] Bluetooth: 6lowpan: search for destination address in all peers Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 70/73] Bluetooth: Check state in l2cap_disconnect_rsp Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 71/73] Bluetooth: validate BLE connection interval updates Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 72/73] gtp: fix Illegal context switch in RCU read-side critical section Sasha Levin
2019-07-15 14:36 ` [PATCH AUTOSEL 4.9 73/73] gtp: fix use-after-free in gtp_newlink() Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190715143629.10893-60-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=andrewx.bowers@intel.com \
--cc=jeffrey.t.kirsher@intel.com \
--cc=jesse.brandeburg@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=maurosr@linux.vnet.ibm.com \
--cc=netdev@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®