From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Eiichi Tsukata <devel@etsukata.com>,
James Morse <james.morse@arm.com>,
Tony Luck <tony.luck@intel.com>, Sasha Levin <sashal@kernel.org>,
linux-edac@vger.kernel.org
Subject: [PATCH AUTOSEL 4.4 48/53] EDAC: Fix global-out-of-bounds write when setting edac_mc_poll_msec
Date: Mon, 15 Jul 2019 10:45:30 -0400 [thread overview]
Message-ID: <20190715144535.11636-48-sashal@kernel.org> (raw)
In-Reply-To: <20190715144535.11636-1-sashal@kernel.org>
From: Eiichi Tsukata <devel@etsukata.com>
[ Upstream commit d8655e7630dafa88bc37f101640e39c736399771 ]
Commit 9da21b1509d8 ("EDAC: Poll timeout cannot be zero, p2") assumes
edac_mc_poll_msec to be unsigned long, but the type of the variable still
remained as int. Setting edac_mc_poll_msec can trigger out-of-bounds
write.
Reproducer:
# echo 1001 > /sys/module/edac_core/parameters/edac_mc_poll_msec
KASAN report:
BUG: KASAN: global-out-of-bounds in edac_set_poll_msec+0x140/0x150
Write of size 8 at addr ffffffffb91b2d00 by task bash/1996
CPU: 1 PID: 1996 Comm: bash Not tainted 5.2.0-rc6+ #23
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
Call Trace:
dump_stack+0xca/0x13e
print_address_description.cold+0x5/0x246
__kasan_report.cold+0x75/0x9a
? edac_set_poll_msec+0x140/0x150
kasan_report+0xe/0x20
edac_set_poll_msec+0x140/0x150
? dimmdev_location_show+0x30/0x30
? vfs_lock_file+0xe0/0xe0
? _raw_spin_lock+0x87/0xe0
param_attr_store+0x1b5/0x310
? param_array_set+0x4f0/0x4f0
module_attr_store+0x58/0x80
? module_attr_show+0x80/0x80
sysfs_kf_write+0x13d/0x1a0
kernfs_fop_write+0x2bc/0x460
? sysfs_kf_bin_read+0x270/0x270
? kernfs_notify+0x1f0/0x1f0
__vfs_write+0x81/0x100
vfs_write+0x1e1/0x560
ksys_write+0x126/0x250
? __ia32_sys_read+0xb0/0xb0
? do_syscall_64+0x1f/0x390
do_syscall_64+0xc1/0x390
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fa7caa5e970
Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 04
RSP: 002b:00007fff6acfdfe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fa7caa5e970
RDX: 0000000000000005 RSI: 0000000000e95c08 RDI: 0000000000000001
RBP: 0000000000e95c08 R08: 00007fa7cad1e760 R09: 00007fa7cb36a700
R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000005
R13: 0000000000000001 R14: 00007fa7cad1d600 R15: 0000000000000005
The buggy address belongs to the variable:
edac_mc_poll_msec+0x0/0x40
Memory state around the buggy address:
ffffffffb91b2c00: 00 00 00 00 fa fa fa fa 00 00 00 00 fa fa fa fa
ffffffffb91b2c80: 00 00 00 00 fa fa fa fa 00 00 00 00 fa fa fa fa
>ffffffffb91b2d00: 04 fa fa fa fa fa fa fa 04 fa fa fa fa fa fa fa
^
ffffffffb91b2d80: 04 fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
ffffffffb91b2e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Fix it by changing the type of edac_mc_poll_msec to unsigned int.
The reason why this patch adopts unsigned int rather than unsigned long
is msecs_to_jiffies() assumes arg to be unsigned int. We can avoid
integer conversion bugs and unsigned int will be large enough for
edac_mc_poll_msec.
Reviewed-by: James Morse <james.morse@arm.com>
Fixes: 9da21b1509d8 ("EDAC: Poll timeout cannot be zero, p2")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/edac/edac_mc_sysfs.c | 16 ++++++++--------
drivers/edac/edac_module.h | 2 +-
2 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index 0c53f2d54765..d459cf4b8579 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -26,7 +26,7 @@
static int edac_mc_log_ue = 1;
static int edac_mc_log_ce = 1;
static int edac_mc_panic_on_ue;
-static int edac_mc_poll_msec = 1000;
+static unsigned int edac_mc_poll_msec = 1000;
/* Getter functions for above */
int edac_mc_get_log_ue(void)
@@ -45,30 +45,30 @@ int edac_mc_get_panic_on_ue(void)
}
/* this is temporary */
-int edac_mc_get_poll_msec(void)
+unsigned int edac_mc_get_poll_msec(void)
{
return edac_mc_poll_msec;
}
static int edac_set_poll_msec(const char *val, struct kernel_param *kp)
{
- unsigned long l;
+ unsigned int i;
int ret;
if (!val)
return -EINVAL;
- ret = kstrtoul(val, 0, &l);
+ ret = kstrtouint(val, 0, &i);
if (ret)
return ret;
- if (l < 1000)
+ if (i < 1000)
return -EINVAL;
- *((unsigned long *)kp->arg) = l;
+ *((unsigned int *)kp->arg) = i;
/* notify edac_mc engine to reset the poll period */
- edac_mc_reset_delay_period(l);
+ edac_mc_reset_delay_period(i);
return 0;
}
@@ -82,7 +82,7 @@ MODULE_PARM_DESC(edac_mc_log_ue,
module_param(edac_mc_log_ce, int, 0644);
MODULE_PARM_DESC(edac_mc_log_ce,
"Log correctable error to console: 0=off 1=on");
-module_param_call(edac_mc_poll_msec, edac_set_poll_msec, param_get_int,
+module_param_call(edac_mc_poll_msec, edac_set_poll_msec, param_get_uint,
&edac_mc_poll_msec, 0644);
MODULE_PARM_DESC(edac_mc_poll_msec, "Polling period in milliseconds");
diff --git a/drivers/edac/edac_module.h b/drivers/edac/edac_module.h
index b95a48fc723d..c7a7a0891eb6 100644
--- a/drivers/edac/edac_module.h
+++ b/drivers/edac/edac_module.h
@@ -33,7 +33,7 @@ extern int edac_mc_get_log_ue(void);
extern int edac_mc_get_log_ce(void);
extern int edac_mc_get_panic_on_ue(void);
extern int edac_get_poll_msec(void);
-extern int edac_mc_get_poll_msec(void);
+extern unsigned int edac_mc_get_poll_msec(void);
unsigned edac_dimm_info_location(struct dimm_info *dimm, char *buf,
unsigned len);
--
2.20.1
next prev parent reply other threads:[~2019-07-15 14:49 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-15 14:44 [PATCH AUTOSEL 4.4 01/53] ath10k: Do not send probe response template for mesh Sasha Levin
2019-07-15 14:44 ` [PATCH AUTOSEL 4.4 02/53] ath9k: Check for errors when reading SREV register Sasha Levin
2019-07-15 14:44 ` [PATCH AUTOSEL 4.4 03/53] ath6kl: add some bounds checking Sasha Levin
2019-07-15 14:44 ` [PATCH AUTOSEL 4.4 04/53] ath: DFS JP domain W56 fixed pulse type 3 RADAR detection Sasha Levin
2019-07-15 14:44 ` [PATCH AUTOSEL 4.4 05/53] batman-adv: fix for leaked TVLV handler Sasha Levin
2019-07-15 14:44 ` [PATCH AUTOSEL 4.4 06/53] media: dvb: usb: fix use after free in dvb_usb_device_exit Sasha Levin
2019-07-15 14:44 ` [PATCH AUTOSEL 4.4 07/53] crypto: talitos - fix skcipher failure due to wrong output IV Sasha Levin
2019-07-15 14:44 ` [PATCH AUTOSEL 4.4 08/53] media: marvell-ccic: fix DMA s/g desc number calculation Sasha Levin
2019-07-15 14:44 ` [PATCH AUTOSEL 4.4 09/53] media: vpss: fix a potential NULL pointer dereference Sasha Levin
2019-07-15 14:44 ` [PATCH AUTOSEL 4.4 10/53] net: stmmac: dwmac1000: Clear unused address entries Sasha Levin
2019-07-15 14:44 ` [PATCH AUTOSEL 4.4 11/53] signal/pid_namespace: Fix reboot_pid_ns to use send_sig not force_sig Sasha Levin
2019-07-15 14:44 ` [PATCH AUTOSEL 4.4 12/53] signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig Sasha Levin
2019-07-15 14:44 ` [PATCH AUTOSEL 4.4 13/53] af_key: fix leaks in key_pol_get_resp and dump_sp Sasha Levin
2019-07-15 14:44 ` [PATCH AUTOSEL 4.4 14/53] xfrm: Fix xfrm sel prefix length validation Sasha Levin
2019-07-15 14:44 ` [PATCH AUTOSEL 4.4 15/53] e1000e: start network tx queue only when link is up Sasha Levin
2019-07-15 14:44 ` [PATCH AUTOSEL 4.4 16/53] media: staging: media: davinci_vpfe: - Fix for memory leak if decoder initialization fails Sasha Levin
2019-07-15 14:44 ` [PATCH AUTOSEL 4.4 17/53] net: phy: Check against net_device being NULL Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 18/53] tua6100: Avoid build warnings Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 19/53] locking/lockdep: Fix merging of hlocks with non-zero references Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 20/53] media: wl128x: Fix some error handling in fm_v4l2_init_video_device() Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 21/53] cpupower : frequency-set -r option misses the last cpu in related cpu list Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 22/53] net: fec: Do not use netdev messages too early Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 23/53] net: axienet: Fix race condition causing TX hang Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 24/53] s390/qdio: handle PENDING state for QEBSM devices Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 25/53] perf test 6: Fix missing kvm module load for s390 Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 26/53] gpio: omap: fix lack of irqstatus_raw0 for OMAP4 Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 27/53] gpio: omap: ensure irq is enabled before wakeup Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 28/53] regmap: fix bulk writes on paged registers Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 29/53] bpf: silence warning messages in core Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 30/53] rcu: Force inlining of rcu_read_lock() Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 31/53] xfrm: fix sa selector validation Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 32/53] perf evsel: Make perf_evsel__name() accept a NULL argument Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 33/53] vhost_net: disable zerocopy by default Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 34/53] EDAC/sysfs: Fix memory leak when creating a csrow object Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 35/53] media: i2c: fix warning same module names Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 36/53] ntp: Limit TAI-UTC offset Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 37/53] timer_list: Guard procfs specific code Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 38/53] acpi/arm64: ignore 5.1 FADTs that are reported as 5.0 Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 39/53] media: coda: fix mpeg2 sequence number handling Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 40/53] media: coda: increment sequence offset for the last returned frame Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 41/53] mt7601u: do not schedule rx_tasklet when the device has been disconnected Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 42/53] x86/build: Add 'set -e' to mkcapflags.sh to delete broken capflags.c Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 43/53] mt7601u: fix possible memory leak when the device is disconnected Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 44/53] ath10k: fix PCIE device wake up failed Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 45/53] rslib: Fix decoding of shortened codes Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 46/53] rslib: Fix handling of of caller provided syndrome Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 47/53] ixgbe: Check DDM existence in transceiver before access Sasha Levin
2019-07-15 14:45 ` Sasha Levin [this message]
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 49/53] bcache: check c->gc_thread by IS_ERR_OR_NULL in cache_set_flush() Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 50/53] Bluetooth: hci_bcsp: Fix memory leak in rx_skb Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 51/53] Bluetooth: 6lowpan: search for destination address in all peers Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 52/53] Bluetooth: Check state in l2cap_disconnect_rsp Sasha Levin
2019-07-15 14:45 ` [PATCH AUTOSEL 4.4 53/53] Bluetooth: validate BLE connection interval updates Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190715144535.11636-48-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=devel@etsukata.com \
--cc=james.morse@arm.com \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®