From: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
To: Haneen Mohammed <hamohammed.sa@gmail.com>,
David Airlie <airlied@linux.ie>, Simon Ser <contact@emersion.fr>,
Oleg Vasilev <oleg.vasilev@intel.com>,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH V3] drm/vkms: Add support for vkms work without vblank
Date: Tue, 16 Jul 2019 23:07:37 -0300 [thread overview]
Message-ID: <20190717020737.z2mu64s3lfyt7pl7@smtp.gmail.com> (raw)
In-Reply-To: <20190716090345.GX15868@phenom.ffwll.local>
[-- Attachment #1: Type: text/plain, Size: 6857 bytes --]
On 07/16, Daniel Vetter wrote:
> On Thu, Jul 11, 2019 at 11:57:18PM -0300, Rodrigo Siqueira wrote:
> > On 07/10, Daniel Vetter wrote:
> > > On Tue, Jul 09, 2019 at 10:55:14PM -0300, Rodrigo Siqueira wrote:
> > > > Currently, vkms only work with enabled VBlank. This patch adds another
> > > > operation model that allows vkms to work without VBlank support. In this
> > > > scenario, vblank signaling is faked by calling drm_send_vblank_event()
> > > > in vkms_crtc_atomic_flush(); this approach works due to the
> > > > drm_vblank_get() == 0 checking.
> > > >
> > > > Changes since V2:
> > > > - Rebase
> > > >
> > > > Changes since V1:
> > > > Daniel Vetter:
> > > > - Change module parameter name from disablevblank to virtual_hw
> > > > - Improve parameter description
> > > > - Improve commit message
> > > >
> > > > Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
> > > > ---
> > > > drivers/gpu/drm/vkms/vkms_crtc.c | 10 ++++++++++
> > > > drivers/gpu/drm/vkms/vkms_drv.c | 13 +++++++++++--
> > > > drivers/gpu/drm/vkms/vkms_drv.h | 2 ++
> > > > 3 files changed, 23 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/vkms/vkms_crtc.c b/drivers/gpu/drm/vkms/vkms_crtc.c
> > > > index 49a8ec2cb1c1..a0c75b8c4335 100644
> > > > --- a/drivers/gpu/drm/vkms/vkms_crtc.c
> > > > +++ b/drivers/gpu/drm/vkms/vkms_crtc.c
> > > > @@ -207,12 +207,22 @@ static int vkms_crtc_atomic_check(struct drm_crtc *crtc,
> > > > static void vkms_crtc_atomic_enable(struct drm_crtc *crtc,
> > > > struct drm_crtc_state *old_state)
> > > > {
> > > > + struct vkms_output *vkms_out = drm_crtc_to_vkms_output(crtc);
> > > > +
> > > > + if (vkms_out->disable_vblank)
> > > > + return;
> > > > +
> > > > drm_crtc_vblank_on(crtc);
> > > > }
> > > >
> > > > static void vkms_crtc_atomic_disable(struct drm_crtc *crtc,
> > > > struct drm_crtc_state *old_state)
> > > > {
> > > > + struct vkms_output *vkms_out = drm_crtc_to_vkms_output(crtc);
> > > > +
> > > > + if (vkms_out->disable_vblank)
> > > > + return;
> > > > +
> > > > drm_crtc_vblank_off(crtc);
> > > > }
> > > >
> > > > diff --git a/drivers/gpu/drm/vkms/vkms_drv.c b/drivers/gpu/drm/vkms/vkms_drv.c
> > > > index 152d7de24a76..542a002ef9d5 100644
> > > > --- a/drivers/gpu/drm/vkms/vkms_drv.c
> > > > +++ b/drivers/gpu/drm/vkms/vkms_drv.c
> > > > @@ -34,6 +34,11 @@ bool enable_writeback;
> > > > module_param_named(enable_writeback, enable_writeback, bool, 0444);
> > > > MODULE_PARM_DESC(enable_writeback, "Enable/Disable writeback connector");
> > > >
> > > > +bool virtual_hw;
> > >
> > > Can be static, you only use this in vkms_drv.c.
> > >
> > > > +module_param_named(virtual_hw, virtual_hw, bool, 0444);
> > > > +MODULE_PARM_DESC(virtual_hw,
> > > > + "Enable virtual hardware mode (disables vblanks and immediately completes flips)");
> > > > +
> > > > static const struct file_operations vkms_driver_fops = {
> > > > .owner = THIS_MODULE,
> > > > .open = drm_open,
> > > > @@ -154,9 +159,13 @@ static int __init vkms_init(void)
> > > > if (ret)
> > > > goto out_unregister;
> > > >
> > > > - vkms_device->drm.irq_enabled = true;
> > > > + vkms_device->output.disable_vblank = virtual_hw;
> > > > + vkms_device->drm.irq_enabled = !virtual_hw;
> > > > +
> > > > + if (virtual_hw)
> > > > + DRM_INFO("Virtual hardware mode enabled");
> > > >
> > > > - ret = drm_vblank_init(&vkms_device->drm, 1);
> > > > + ret = (virtual_hw) ? 0 : drm_vblank_init(&vkms_device->drm, 1);
> > > > if (ret) {
> > > > DRM_ERROR("Failed to vblank\n");
> > > > goto out_fini;
> > > > diff --git a/drivers/gpu/drm/vkms/vkms_drv.h b/drivers/gpu/drm/vkms/vkms_drv.h
> > > > index 9ff2cd4ebf81..256e5e65c947 100644
> > > > --- a/drivers/gpu/drm/vkms/vkms_drv.h
> > > > +++ b/drivers/gpu/drm/vkms/vkms_drv.h
> > > > @@ -21,6 +21,7 @@
> > > >
> > > > extern bool enable_cursor;
> > > > extern bool enable_writeback;
> > > > +extern bool virtual_hw;
> > > >
> > > > struct vkms_composer {
> > > > struct drm_framebuffer fb;
> > > > @@ -69,6 +70,7 @@ struct vkms_output {
> > > > struct drm_connector connector;
> > > > struct drm_writeback_connector wb_connector;
> > > > struct hrtimer vblank_hrtimer;
> > > > + bool disable_vblank;
> > > > ktime_t period_ns;
> > > > struct drm_pending_vblank_event *event;
> > > > /* ordered wq for composer_work */
> > >
> > > I'm kinda wondering how this works at all ... does writeback/crc still
> > > work if you set virtual mode? Writeback since this seems based on the
> > > writeback series ...
> >
> > Hi,
> >
> > I tested this patch with kms_flip with the "drm/drm_vblank: Change
> > EINVAL by the correct errno" patch [1]. However, you’re right about the
> > writeback/crc tests, they does not pass because this patch disables
> > vblank which in turn does not invoke "vkms_vblank_simulate()".
> >
> > In this sense, I’m a little bit confused about how should I handle this
> > issue. If I correctly understood, without vblank support we have to
> > trigger vkms_composer_worker() when the userspace invoke
> > drmModePageFlip(), am I right? If so, an approach could add page_flip()
> > callback to vkms and invoke vkms_composer_worker(); however, the
> > documentation says that page_flip is a legacy entry point. Do you have a
> > suggestion?
>
> We need this in atomic, for everyone. So instead of launching a vblank and
> letting the vblank simulation kick off the crc/writeback work,
> atomic_flush needs to also kick of the crc/vblank work. And make sure that
> we feed the same vblank frame count values to the generated vblank even as
> to the crc work (or maybe those are hardcoded to 0 for vblank-less, not
> sure).
> -Daniel
Just for checking if I correctly understood... the idea is reworking
vkms_vblank_simulate() a little bit in order to decouple the kick of
crc/writeback to atomic_flush(). Right?
> >
> > 1. https://patchwork.freedesktop.org/patch/314399/?series=50697&rev=7
> >
> > Thanks
> >
> > > btw if you send out patches that need other patches, point at that other
> > > series in the cover letter or patch. Gets confusing fast otherwise.
> > > -Daniel
> > > --
> > > Daniel Vetter
> > > Software Engineer, Intel Corporation
> > > http://blog.ffwll.ch
> >
> > --
> > Rodrigo Siqueira
> > https://siqueira.tech
>
>
>
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
--
Rodrigo Siqueira
https://siqueira.tech
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2019-07-17 2:07 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-10 1:55 Rodrigo Siqueira
2019-07-10 16:40 ` Daniel Vetter
2019-07-12 2:57 ` Rodrigo Siqueira
2019-07-16 9:03 ` Daniel Vetter
2019-07-17 2:07 ` Rodrigo Siqueira [this message]
2019-07-19 9:03 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190717020737.z2mu64s3lfyt7pl7@smtp.gmail.com \
--to=rodrigosiqueiramelo@gmail.com \
--cc=airlied@linux.ie \
--cc=contact@emersion.fr \
--cc=dri-devel@lists.freedesktop.org \
--cc=hamohammed.sa@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=oleg.vasilev@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®