Re: [RFC 2/4] arm64: mm: parse dma-ranges in order to better estimate arm64_dma_phys_limit

[Catalin Marinas <catalin.marinas@arm.com>]

On Wed, Jul 17, 2019 at 05:31:33PM +0200, Nicolas Saenz Julienne wrote:
> The dma physical limit has so far been calculated based on the memory
> size and the assumption that dma would be at least able to address the
> first 4 GB. This turned out no to be true with the Raspberry Pi 4
> which, on it's main interconnect, can only address the first GB of
> memory, even though it might have up to 4 GB.
> 
> With the current miscalculated dma physical limit the contiguous memory
> reserve is located in an inaccessible area for most of the board's
> devices.
> 
> To solve this we now scan the device tree for the 'dma-ranges' property
> on the root or interconnect nodes, which allows us to calculate the
> lowest common denominator dma physical limit. If no dma-ranges is
> available, we'll default to the old scheme.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> ---
>  arch/arm64/mm/init.c | 61 +++++++++++++++++++++++++++++++++++++++++---
>  1 file changed, 57 insertions(+), 4 deletions(-)

I'd rather have this parsing in the core code, returning setting the
minimum DMA mask (or range, address etc.) that covers all devices/buses
described.

-- 
Catalin