mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Greg KH <gregkh@linuxfoundation.org>
To: Muchun Song <smuchun@gmail.com>
Cc: rafael@kernel.org, mojha@codeaurora.org,
	benh@kernel.crashing.org, prsood@codeaurora.org,
	gkohli@codeaurora.org, songmuchun@bytedance.com,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v7] driver core: Fix use-after-free and double free on glue directory
Date: Tue, 30 Jul 2019 18:46:31 +0200	[thread overview]
Message-ID: <20190730164631.GA17604@kroah.com> (raw)
In-Reply-To: <20190727032122.24639-1-smuchun@gmail.com>

On Sat, Jul 27, 2019 at 11:21:22AM +0800, Muchun Song wrote:
> There is a race condition between removing glue directory and adding a new
> device under the glue dir. It can be reproduced in following test:
> 
> CPU1:                                         CPU2:
> 
> device_add()
>   get_device_parent()
>     class_dir_create_and_add()
>       kobject_add_internal()
>         create_dir()    // create glue_dir
> 
>                                               device_add()
>                                                 get_device_parent()
>                                                   kobject_get() // get glue_dir
> 
> device_del()
>   cleanup_glue_dir()
>     kobject_del(glue_dir)
> 
>                                                 kobject_add()
>                                                   kobject_add_internal()
>                                                     create_dir() // in glue_dir
>                                                       sysfs_create_dir_ns()
>                                                         kernfs_create_dir_ns(sd)
> 
>       sysfs_remove_dir() // glue_dir->sd=NULL
>       sysfs_put()        // free glue_dir->sd
> 
>                                                           // sd is freed
>                                                           kernfs_new_node(sd)
>                                                             kernfs_get(glue_dir)
>                                                             kernfs_add_one()
>                                                             kernfs_put()
> 
> Before CPU1 remove last child device under glue dir, if CPU2 add a new
> device under glue dir, the glue_dir kobject reference count will be
> increase to 2 via kobject_get() in get_device_parent(). And CPU2 has
> been called kernfs_create_dir_ns(), but not call kernfs_new_node().
> Meanwhile, CPU1 call sysfs_remove_dir() and sysfs_put(). This result in
> glue_dir->sd is freed and it's reference count will be 0. Then CPU2 call
> kernfs_get(glue_dir) will trigger a warning in kernfs_get() and increase
> it's reference count to 1. Because glue_dir->sd is freed by CPU1, the next
> call kernfs_add_one() by CPU2 will fail(This is also use-after-free)
> and call kernfs_put() to decrease reference count. Because the reference
> count is decremented to 0, it will also call kmem_cache_free() to free
> the glue_dir->sd again. This will result in double free.
> 
> In order to avoid this happening, we also should make sure that kernfs_node
> for glue_dir is released in CPU1 only when refcount for glue_dir kobj is
> 1 to fix this race.
> 
> The following calltrace is captured in kernel 4.14 with the following patch
> applied:
> 
> commit 726e41097920 ("drivers: core: Remove glue dirs from sysfs earlier")
> 
> --------------------------------------------------------------------------
> [    3.633703] WARNING: CPU: 4 PID: 513 at .../fs/kernfs/dir.c:494
>                 Here is WARN_ON(!atomic_read(&kn->count) in kernfs_get().
> ....
> [    3.633986] Call trace:
> [    3.633991]  kernfs_create_dir_ns+0xa8/0xb0
> [    3.633994]  sysfs_create_dir_ns+0x54/0xe8
> [    3.634001]  kobject_add_internal+0x22c/0x3f0
> [    3.634005]  kobject_add+0xe4/0x118
> [    3.634011]  device_add+0x200/0x870
> [    3.634017]  _request_firmware+0x958/0xc38
> [    3.634020]  request_firmware_into_buf+0x4c/0x70
> ....
> [    3.634064] kernel BUG at .../mm/slub.c:294!
>                 Here is BUG_ON(object == fp) in set_freepointer().
> ....
> [    3.634346] Call trace:
> [    3.634351]  kmem_cache_free+0x504/0x6b8
> [    3.634355]  kernfs_put+0x14c/0x1d8
> [    3.634359]  kernfs_create_dir_ns+0x88/0xb0
> [    3.634362]  sysfs_create_dir_ns+0x54/0xe8
> [    3.634366]  kobject_add_internal+0x22c/0x3f0
> [    3.634370]  kobject_add+0xe4/0x118
> [    3.634374]  device_add+0x200/0x870
> [    3.634378]  _request_firmware+0x958/0xc38
> [    3.634381]  request_firmware_into_buf+0x4c/0x70
> --------------------------------------------------------------------------
> 
> Fixes: 726e41097920 ("drivers: core: Remove glue dirs from sysfs earlier")
> Signed-off-by: Muchun Song <smuchun@gmail.com>
> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
> Signed-off-by: Prateek Sood <prsood@codeaurora.org>
> ---
> 
> Change in v7:
>        1. Update commit message.
> Change in v6:
>        1. Remove hardcoding "1 "
> Change in v5:
>        1. Revert to the v1 fix.
>        2. Add some comment to explain why we need do this in
>           cleanup_glue_dir().
> Change in v4:
>        1. Add some kerneldoc comment.
>        2. Remove unlock_if_glue_dir().
>        3. Rename get_device_parent_locked_if_glue_dir() to
>           get_device_parent_locked.
>        4. Update commit message.
> Change in v3:
>        Add change log.
> Change in v2:
>        Fix device_move() also.

Now queued up, thanks for sticking with this.

greg k-h

      parent reply	other threads:[~2019-07-30 16:46 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-27  3:21 Muchun Song
2019-07-29  4:53 ` Prateek Sood
2019-07-30 16:46 ` Greg KH [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190730164631.GA17604@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=benh@kernel.crashing.org \
    --cc=gkohli@codeaurora.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mojha@codeaurora.org \
    --cc=prsood@codeaurora.org \
    --cc=rafael@kernel.org \
    --cc=smuchun@gmail.com \
    --cc=songmuchun@bytedance.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome