From: Jose Carlos Cazarin Filho <joseespiriki@gmail.com>
To: Larry Finger <Larry.Finger@lwfinger.net>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
lkcamp@lists.libreplanetbr.org
Subject: [PATCH] rtl8188eu: hal: phy.c
Date: Fri, 2 Aug 2019 21:00:18 +0000 [thread overview]
Message-ID: <20190802210018.29251-1-joseespiriki@gmail.com> (raw)
Fix a lot of checkpath errors of the type:
-CHECK: spaces preferred around that
-CHECK: Alignment should match open parenthesis
Signed-off-by: Jose Carlos Cazarin Filho <joseespiriki@gmail.com>
---
My second commit to the kernel, I know you ppl don't like these kind of commits
fixing style-only erros pointed by the checkpath, but I'm doing this just to learn
Thanks!
drivers/staging/rtl8188eu/hal/phy.c | 54 ++++++++++++++---------------
1 file changed, 27 insertions(+), 27 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/phy.c b/drivers/staging/rtl8188eu/hal/phy.c
index 51c40abfa..f0d242dec 100644
--- a/drivers/staging/rtl8188eu/hal/phy.c
+++ b/drivers/staging/rtl8188eu/hal/phy.c
@@ -52,7 +52,7 @@ void phy_set_bb_reg(struct adapter *adapt, u32 regaddr, u32 bitmask, u32 data)
}
static u32 rf_serial_read(struct adapter *adapt,
- enum rf_radio_path rfpath, u32 offset)
+ enum rf_radio_path rfpath, u32 offset)
{
u32 ret = 0;
struct bb_reg_def *phyreg = &adapt->HalData->PHYRegDef[rfpath];
@@ -69,10 +69,10 @@ static u32 rf_serial_read(struct adapter *adapt,
bMaskDWord);
tmplong2 = (tmplong2 & (~bLSSIReadAddress)) |
- (offset<<23) | bLSSIReadEdge;
+ (offset << 23) | bLSSIReadEdge;
phy_set_bb_reg(adapt, rFPGA0_XA_HSSIParameter2, bMaskDWord,
- tmplong&(~bLSSIReadEdge));
+ tmplong & (~bLSSIReadEdge));
udelay(10);
phy_set_bb_reg(adapt, phyreg->rfHSSIPara2, bMaskDWord, tmplong2);
@@ -102,12 +102,12 @@ static void rf_serial_write(struct adapter *adapt,
struct bb_reg_def *phyreg = &adapt->HalData->PHYRegDef[rfpath];
offset &= 0xff;
- data_and_addr = ((offset<<20) | (data&0x000fffff)) & 0x0fffffff;
+ data_and_addr = ((offset << 20) | (data & 0x000fffff)) & 0x0fffffff;
phy_set_bb_reg(adapt, phyreg->rf3wireOffset, bMaskDWord, data_and_addr);
}
u32 rtw_hal_read_rfreg(struct adapter *adapt, enum rf_radio_path rf_path,
- u32 reg_addr, u32 bit_mask)
+ u32 reg_addr, u32 bit_mask)
{
u32 original_value, bit_shift;
@@ -117,7 +117,7 @@ u32 rtw_hal_read_rfreg(struct adapter *adapt, enum rf_radio_path rf_path,
}
void phy_set_rf_reg(struct adapter *adapt, enum rf_radio_path rf_path,
- u32 reg_addr, u32 bit_mask, u32 data)
+ u32 reg_addr, u32 bit_mask, u32 data)
{
u32 original_value, bit_shift;
@@ -143,20 +143,20 @@ static void get_tx_power_index(struct adapter *adapt, u8 channel, u8 *cck_pwr,
for (TxCount = 0; TxCount < path_nums; TxCount++) {
if (TxCount == RF_PATH_A) {
cck_pwr[TxCount] = hal_data->Index24G_CCK_Base[TxCount][index];
- ofdm_pwr[TxCount] = hal_data->Index24G_BW40_Base[RF_PATH_A][index]+
+ ofdm_pwr[TxCount] = hal_data->Index24G_BW40_Base[RF_PATH_A][index] +
hal_data->OFDM_24G_Diff[TxCount][RF_PATH_A];
- bw20_pwr[TxCount] = hal_data->Index24G_BW40_Base[RF_PATH_A][index]+
+ bw20_pwr[TxCount] = hal_data->Index24G_BW40_Base[RF_PATH_A][index] +
hal_data->BW20_24G_Diff[TxCount][RF_PATH_A];
bw40_pwr[TxCount] = hal_data->Index24G_BW40_Base[TxCount][index];
} else if (TxCount == RF_PATH_B) {
cck_pwr[TxCount] = hal_data->Index24G_CCK_Base[TxCount][index];
- ofdm_pwr[TxCount] = hal_data->Index24G_BW40_Base[RF_PATH_A][index]+
- hal_data->BW20_24G_Diff[RF_PATH_A][index]+
+ ofdm_pwr[TxCount] = hal_data->Index24G_BW40_Base[RF_PATH_A][index] +
+ hal_data->BW20_24G_Diff[RF_PATH_A][index] +
hal_data->BW20_24G_Diff[TxCount][index];
- bw20_pwr[TxCount] = hal_data->Index24G_BW40_Base[RF_PATH_A][index]+
- hal_data->BW20_24G_Diff[TxCount][RF_PATH_A]+
+ bw20_pwr[TxCount] = hal_data->Index24G_BW40_Base[RF_PATH_A][index] +
+ hal_data->BW20_24G_Diff[TxCount][RF_PATH_A] +
hal_data->BW20_24G_Diff[TxCount][index];
bw40_pwr[TxCount] = hal_data->Index24G_BW40_Base[TxCount][index];
}
@@ -190,7 +190,7 @@ void phy_set_tx_power_level(struct adapter *adapt, u8 channel)
rtl88eu_phy_rf6052_set_cck_txpower(adapt, &cck_pwr[0]);
rtl88eu_phy_rf6052_set_ofdm_txpower(adapt, &ofdm_pwr[0], &bw20_pwr[0],
- &bw40_pwr[0], channel);
+ &bw40_pwr[0], channel);
}
static void phy_set_bw_mode_callback(struct adapter *adapt)
@@ -903,13 +903,13 @@ static bool simularity_compare(struct adapter *adapt, s32 resulta[][8],
if (diff > MAX_TOLERANCE) {
if ((i == 2 || i == 6) && !sim_bitmap) {
if (resulta[c1][i] + resulta[c1][i+1] == 0)
- final_candidate[(i/4)] = c2;
+ final_candidate[(i / 4)] = c2;
else if (resulta[c2][i] + resulta[c2][i+1] == 0)
- final_candidate[(i/4)] = c1;
+ final_candidate[(i / 4)] = c1;
else
- sim_bitmap = sim_bitmap | (1<<i);
+ sim_bitmap = sim_bitmap | (1 << i);
} else {
- sim_bitmap = sim_bitmap | (1<<i);
+ sim_bitmap = sim_bitmap | (1 << i);
}
}
}
@@ -1074,19 +1074,19 @@ static void phy_iq_calibrate(struct adapter *adapt, s32 result[][8],
path_b_ok = phy_path_b_iqk(adapt);
if (path_b_ok == 0x03) {
result[t][4] = (phy_query_bb_reg(adapt, rTx_Power_Before_IQK_B,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord)&0x3FF0000) >> 16;
result[t][5] = (phy_query_bb_reg(adapt, rTx_Power_After_IQK_B,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord)&0x3FF0000) >> 16;
result[t][6] = (phy_query_bb_reg(adapt, rRx_Power_Before_IQK_B_2,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord)&0x3FF0000) >> 16;
result[t][7] = (phy_query_bb_reg(adapt, rRx_Power_After_IQK_B_2,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord)&0x3FF0000) >> 16;
break;
} else if (i == (retry_count - 1) && path_b_ok == 0x01) { /* Tx IQK OK */
result[t][4] = (phy_query_bb_reg(adapt, rTx_Power_Before_IQK_B,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord)&0x3FF0000) >> 16;
result[t][5] = (phy_query_bb_reg(adapt, rTx_Power_After_IQK_B,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord)&0x3FF0000) >> 16;
}
}
@@ -1158,12 +1158,12 @@ static void phy_lc_calibrate(struct adapter *adapt, bool is2t)
/* 2. Set RF mode = standby mode */
/* Path-A */
phy_set_rf_reg(adapt, RF_PATH_A, RF_AC, bMask12Bits,
- (rf_a_mode&0x8FFFF)|0x10000);
+ (rf_a_mode&0x8FFFF) | 0x10000);
/* Path-B */
if (is2t)
phy_set_rf_reg(adapt, RF_PATH_B, RF_AC, bMask12Bits,
- (rf_b_mode&0x8FFFF)|0x10000);
+ (rf_b_mode&0x8FFFF) | 0x10000);
}
/* 3. Read RF reg18 */
@@ -1171,12 +1171,12 @@ static void phy_lc_calibrate(struct adapter *adapt, bool is2t)
/* 4. Set LC calibration begin bit15 */
phy_set_rf_reg(adapt, RF_PATH_A, RF_CHNLBW, bMask12Bits,
- lc_cal|0x08000);
+ lc_cal | 0x08000);
msleep(100);
/* Restore original situation */
- if ((tmpreg&0x70) != 0) {
+ if ((tmpreg & 0x70) != 0) {
/* Deal with continuous TX case */
/* Path-A */
usb_write8(adapt, 0xd03, tmpreg);
--
2.20.1
next reply other threads:[~2019-08-02 21:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-02 21:00 Jose Carlos Cazarin Filho [this message]
2019-08-03 6:24 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190802210018.29251-1-joseespiriki@gmail.com \
--to=joseespiriki@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lkcamp@lists.libreplanetbr.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®