From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: mark.rutland@arm.com, mripard@kernel.org, robh+dt@kernel.org,
wens@csie.org
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
Corentin Labbe <clabbe.montjoie@gmail.com>
Subject: [PATCH] ARM64: dts: allwinner: Add devicetree for pine H64 modelA evaluation board
Date: Thu, 8 Aug 2019 10:42:53 +0200 [thread overview]
Message-ID: <20190808084253.10573-1-clabbe.montjoie@gmail.com> (raw)
This patch adds the evaluation variant of the model A of the PineH64.
The model A has the same size of the pine64 and has a PCIE slot.
The only devicetree difference with current pineH64, is the PHY
regulator.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../sun50i-h6-pine-h64-modelA-eval.dts | 26 +++++++++++++++++++
2 files changed, 27 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index f6db0611cb85..9a02166cbf72 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -25,3 +25,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-modelA-eval.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
new file mode 100644
index 000000000000..d8ff02747efe
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2019 Corentin Labbe <clabbe.montjoie@gmail.com>
+ */
+
+#include "sun50i-h6-pine-h64.dts"
+
+/ {
+ model = "Pine H64 model A evaluation board";
+ compatible = "pine64,pine-h64-modelA-eval", "allwinner,sun50i-h6";
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+};
+
+&emac {
+ phy-supply = <®_gmac_3v3>;
+};
--
2.21.0
next reply other threads:[~2019-08-08 8:43 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-08 8:42 Corentin Labbe [this message]
2019-08-08 14:50 ` [linux-sunxi] " Clément Péron
2019-08-14 13:07 ` Corentin Labbe
2019-08-12 9:40 ` Maxime Ripard
2019-08-14 13:17 ` Corentin Labbe
2019-08-14 13:33 ` Maxime Ripard
2019-08-16 9:35 ` Corentin Labbe
2019-08-16 11:36 ` Maxime Ripard
2019-08-16 11:57 ` Corentin Labbe
2019-08-16 13:52 ` Maxime Ripard
2019-08-16 14:00 ` Corentin Labbe
2019-08-20 13:58 ` Maxime Ripard
2019-08-21 9:19 ` Icenowy Zheng
2019-08-12 10:56 ` [linux-sunxi] " Jernej Škrabec
2019-08-14 13:20 ` Corentin Labbe
2019-08-14 13:28 ` Clément Péron
2019-08-16 9:50 ` Jernej Škrabec
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190808084253.10573-1-clabbe.montjoie@gmail.com \
--to=clabbe.montjoie@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mark.rutland@arm.com \
--cc=mripard@kernel.org \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®