mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Charles Keepax <ckeepax@opensource.cirrus.com>
To: Lee Jones <lee.jones@linaro.org>
Cc: <robh+dt@kernel.org>, <mark.rutland@arm.com>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<patches@opensource.cirrus.com>
Subject: Re: [PATCH 2/2] mfd: madera: Add support for requesting the supply clocks
Date: Mon, 12 Aug 2019 17:09:37 +0100	[thread overview]
Message-ID: <20190812160937.GM54126@ediswmail.ad.cirrus.com> (raw)
In-Reply-To: <20190812103853.GM26727@dell>

On Mon, Aug 12, 2019 at 11:38:53AM +0100, Lee Jones wrote:
> On Tue, 06 Aug 2019, Charles Keepax wrote:
> 
> > Add the ability to get the clock for each clock input pin of the chip
> > and enable MCLK2 since that is expected to be a permanently enabled
> > 32kHz clock.
> > 
> > Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
> > ---
> >  int madera_dev_init(struct madera *madera)
> >  {
> > +	static const char * const mclk_name[] = { "mclk1", "mclk2", "mclk3" };
> >  	struct device *dev = madera->dev;
> >  	unsigned int hwid;
> >  	int (*patch_fn)(struct madera *) = NULL;
> > @@ -450,6 +451,17 @@ int madera_dev_init(struct madera *madera)
> >  		       sizeof(madera->pdata));
> >  	}
> >  
> > +	BUILD_BUG_ON(ARRAY_SIZE(madera->mclk) != ARRAY_SIZE(mclk_name));
> 
> Not sure how this could happen.  Surely we don't need it.
> 

mclk_name is defined locally in this function and the mclk array in
include/linux/mfd/madera/core.h. This is to guard against one of
them being updated but not the other. It is by no means essential
but it feels like a good trade off given there is really limited
downside.

> > +	for (i = 0; i < ARRAY_SIZE(madera->mclk); i++) {
> > +		madera->mclk[i] = devm_clk_get_optional(madera->dev,
> > +							mclk_name[i]);
> > +		if (IS_ERR(madera->mclk[i])) {
> > +			dev_warn(madera->dev, "Failed to get %s: %ld\n",
> > +				 mclk_name[i], PTR_ERR(madera->mclk[i]));
> 
> Do we even want to warn on the non-acquisition of an optional clock?
> 
> Especially with a message that looks like something actually failed.
> 

devm_clk_get_optional will return NULL if the clock was not
specified, so this is silent in that case. A warning in the case
something actually went wrong seems reasonable even if the clock
is optional as the user tried to do something and it didn't
behave as they intended.

> > +			madera->mclk[i] = NULL;
> > +		}
> > +	}
> > +
> >  	ret = madera_get_reset_gpio(madera);
> >  	if (ret)
> >  		return ret;
> > @@ -660,13 +672,19 @@ int madera_dev_init(struct madera *madera)
> >  	}
> >  
> >  	/* Init 32k clock sourced from MCLK2 */
> > +	ret = clk_prepare_enable(madera->mclk[MADERA_MCLK2]);
> > +	if (ret != 0) {
> > +		dev_err(madera->dev, "Failed to enable 32k clock: %d\n", ret);
> > +		goto err_reset;
> > +	}
> 
> What happened to this being optional?
> 

The device needs the clock but specifying it through DT is
optional (the clock framework functions are no-ops and return
success if the clock pointer is NULL). Normally the 32kHz
clock is always on, and more importantly no existing users of
the driver will be specifying one.

We could remove the optional status for MCLK2, but it could break
existing users who don't yet specify the clock until they update
their DT and it will complicate the code as the other clocks are
definitely optional, so MCLK2 will need special handling.

> >  	ret = regmap_update_bits(madera->regmap,
> >  			MADERA_CLOCK_32K_1,
> >  			MADERA_CLK_32K_ENA_MASK | MADERA_CLK_32K_SRC_MASK,
> >  			MADERA_CLK_32K_ENA | MADERA_32KZ_MCLK2);
> >  	if (ret) {
> >  		dev_err(madera->dev, "Failed to init 32k clock: %d\n", ret);
> > -		goto err_reset;
> > +		goto err_clock;
> >  	}
> >  
> >  	pm_runtime_set_active(madera->dev);
> > @@ -687,6 +705,8 @@ int madera_dev_init(struct madera *madera)
> >  
> >  err_pm_runtime:
> >  	pm_runtime_disable(madera->dev);
> > +err_clock:
> > +	clk_disable_unprepare(madera->mclk[MADERA_MCLK2]);
> 
> Where are the other clocks consumed?
> 

Other clocks will be consumed by the ASoC part of the driver for
clocking the audio functionality and running the FLLs. I haven't
sent those patches yet, but was planning on doing so once this
was merged.

Thanks,
Charles

  reply	other threads:[~2019-08-12 16:09 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-06 15:13 [PATCH 1/2] mfd: madera: Update DT binding document to support clock supplies Charles Keepax
2019-08-06 15:13 ` [PATCH 2/2] mfd: madera: Add support for requesting the supply clocks Charles Keepax
2019-08-12 10:38   ` Lee Jones
2019-08-12 16:09     ` Charles Keepax [this message]
2019-08-12 16:28       ` Richard Fitzgerald
2019-08-13  7:18       ` Lee Jones
2019-08-13  7:59         ` Charles Keepax
2019-08-12 10:39 ` [PATCH 1/2] mfd: madera: Update DT binding document to support clock supplies Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190812160937.GM54126@ediswmail.ad.cirrus.com \
    --to=ckeepax@opensource.cirrus.com \
    --cc=devicetree@vger.kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=patches@opensource.cirrus.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®