From: Jiada Wang <jiada_wang@mentor.com>
To: <nick@shmanahar.org>, <dmitry.torokhov@gmail.com>
Cc: <linux-input@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<jiada_wang@mentor.com>, <george_davis@mentor.com>
Subject: [PATCH v1 00/63] atmel_mxt_ts misc
Date: Fri, 16 Aug 2019 17:28:49 +0900 [thread overview]
Message-ID: <20190816082952.17985-1-jiada_wang@mentor.com> (raw)
This patch-set forward ports Nick Dyer's work in ndyer/linux github repository
as long as some other features and fixes
Balasubramani Vivekanandan (4):
Input: atmel_mxt_ts: Limit the max bytes transferred in an i2c
transaction
Input: atmel_mxt_ts: update stale use_retrigen_workaround flag
Input: atmel_mxt_ts: use gpiod_set_value_cansleep for reset pin
input: atmel_mxt_ts: Add NULL check for sysfs attribute debug_msg_attr
Bhuvanesh Surachari (3):
Input: touchscreen: Atmel: Enable IRQ_DISABLE_UNLAZY flag for
interrupt
Input: atmel_mxt_ts: Avoid race condition in freeing of input device
Input: atmel_mxt_ts: Prevent crash due to freeing of input device
Daniel Gong (1):
Input: touchscreen: Atmel: Add device tree support for T15 key array
objects
Dean Jenkins (3):
Input: atmel_mxt_ts: return error from
mxt_process_messages_until_invalid()
Input: atmel_mxt_ts: Use msecs_to_jiffies() instead of HZ
Input: atmel_mxt_ts: Use complete when in_bootloader true
Deepak Das (8):
Input: Atmel: improve error handling in mxt_start()
Input: Atmel: improve error handling in mxt_initialize()
Input: Atmel: improve error handling in mxt_update_cfg()
input: atmel_mxt_ts: move bootloader probe from mxt_initialize()
Input: Atmel: Improve error handling in mxt_initialize_input_device()
Input: Atmel: handle ReportID "0x00" while processing T5 messages
input: Atmel: limit the max bytes transferred while reading T5
messages
Input: Atmel: use T44 object to process T5 messages
George G. Davis (1):
input: atmel_mxt_ts: export GPIO reset line via sysfs
Janus Cheng (1):
Input: atmel_mxt_ts - check data->input_dev is not null in
mxt_input_sync()
Jiada Wang (3):
Input: introduce input_mt_report_slot_inactive
Input: atmel_mxt_ts - eliminate data->raw_info_block
Input: atmel_mxt_ts - Fix compilation warning
Karl Tsou (1):
Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs
Kautuk Consul (3):
Input: atmel_mxt_ts - Change call-points of mxt_free_* functions
Input: atmel_mxt_ts - rely on calculated_crc rather than file
config_crc
Input: atmel_mxt_ts - configure and use gpios as real gpios
Naveen Chakka (2):
input: touchscreen: atmel_mxt_ts: Added sysfs entry for touchscreen
status
input: atmel_mxt_ts: added sysfs interface to update atmel T38 data
Nick Dyer (28):
Input: atmel_mxt_ts - rework sysfs init/remove
Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when
necessary
Input: atmel_mxt_ts - split large i2c transfers into blocks
Input: atmel_mxt_ts - output status from T48 Noise Supression
Input: atmel_mxt_ts - output status from T42 Touch Suppression
Input: atmel_mxt_ts - implement T9 vector/orientation support
Input: atmel_mxt_ts - implement T15 Key Array support
Input: atmel_mxt_ts - handle reports from T47 Stylus object
Input: atmel_mxt_ts - implement support for T107 active stylus
Input: atmel_mxt_ts - release touch state during suspend
Input: atmel_mxt_ts - add regulator control support
Input: atmel_mxt_ts - report failures in suspend/resume
Input: atmel_mxt_ts - allow specification of firmware file name
Input: atmel_mxt_ts - handle cfg filename via pdata/sysfs
Input: atmel_mxt_ts - allow input name to be specified in platform
data
Input: atmel_mxt_ts - refactor firmware flash to extract context into
struct
Input: atmel_mxt_ts - refactor code to enter bootloader into separate
func
Input: atmel_mxt_ts - combine bootloader version query with probe
Input: atmel_mxt_ts - improve bootloader state machine handling
Input: atmel_mxt_ts - check firmware format before entering bootloader
Input: atmel_mxt_ts - rename bl_completion to chg_completion
Input: atmel_mxt_ts - make bootloader interrupt driven
Input: atmel_mxt_ts - delay enabling IRQ when not using regulators
Input: atmel_mxt_ts - implement I2C retries
Input: atmel_mxt_ts - orientation is not present in hover
Input: atmel_mxt_ts - implement debug output for messages
Input: atmel_mxt_ts - add memory access interface via sysfs
Input: atmel_mxt_ts - implement improved debug message interface
Nikhil Ravindran (1):
Input: atmel_mxt_ts: Add support for run self-test routine.
Sanjeev Chugh (2):
Input: atmel_mxt_ts: Remove sysfs attributes during driver detach
Input: atmel_mxt_ts: Implement synchronization during various
operation
karl tsou (1):
Input: atmel_mxt_ts - add config checksum attribute to sysfs
keerthikumarp (1):
input: atmel_mxt_ts: Add Missing Delay for reset handling of Atmel
touch panel controller in detachable displays.
.../bindings/input/atmel,maxtouch.txt | 29 +
MAINTAINERS | 1 +
drivers/hid/hid-alps.c | 3 +-
drivers/hid/hid-asus.c | 3 +-
drivers/hid/hid-elan.c | 3 +-
drivers/hid/hid-logitech-hidpp.c | 5 +-
drivers/hid/hid-magicmouse.c | 3 +-
drivers/hid/hid-multitouch.c | 9 +-
drivers/hid/hid-sony.c | 8 +-
drivers/hid/wacom_wac.c | 15 +-
drivers/input/input-mt.c | 15 +-
drivers/input/misc/xen-kbdfront.c | 2 +-
drivers/input/mouse/elan_i2c_core.c | 2 +-
drivers/input/mouse/elantech.c | 5 +-
drivers/input/mouse/focaltech.c | 3 +-
drivers/input/mouse/sentelic.c | 3 +-
drivers/input/mouse/synaptics.c | 3 +-
drivers/input/rmi4/rmi_2d_sensor.c | 6 +-
drivers/input/touchscreen/atmel_mxt_ts.c | 2612 ++++++++++++++---
drivers/input/touchscreen/chipone_icn8505.c | 4 +-
drivers/input/touchscreen/cyttsp4_core.c | 5 +-
drivers/input/touchscreen/cyttsp_core.c | 2 +-
drivers/input/touchscreen/egalax_ts.c | 3 +-
drivers/input/touchscreen/hideep.c | 7 +-
drivers/input/touchscreen/ili210x.c | 3 +-
drivers/input/touchscreen/melfas_mip4.c | 4 +-
drivers/input/touchscreen/mms114.c | 6 +-
drivers/input/touchscreen/penmount.c | 5 +-
drivers/input/touchscreen/raspberrypi-ts.c | 2 +-
drivers/input/touchscreen/raydium_i2c_ts.c | 4 +-
drivers/input/touchscreen/sis_i2c.c | 5 +-
drivers/input/touchscreen/stmfts.c | 2 +-
drivers/input/touchscreen/surface3_spi.c | 4 +-
drivers/input/touchscreen/wacom_w8001.c | 3 +-
drivers/input/touchscreen/zforce_ts.c | 6 +-
include/dt-bindings/input/atmel_mxt_ts.h | 22 +
include/linux/input/mt.h | 1 +
37 files changed, 2324 insertions(+), 494 deletions(-)
create mode 100644 include/dt-bindings/input/atmel_mxt_ts.h
--
2.19.2
next reply other threads:[~2019-08-16 8:29 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-16 8:28 Jiada Wang [this message]
2019-08-16 8:28 ` [PATCH v1 01/63] Input: introduce input_mt_report_slot_inactive Jiada Wang
2019-08-16 17:12 ` Dmitry Torokhov
2019-08-21 9:13 ` Jiada Wang
2019-08-16 8:28 ` [PATCH v1 02/63] Input: atmel_mxt_ts - rework sysfs init/remove Jiada Wang
2019-08-16 8:28 ` [PATCH v1 03/63] Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Jiada Wang
2019-08-16 17:16 ` Dmitry Torokhov
2019-08-21 13:26 ` Jiada Wang
2019-08-21 17:54 ` Dmitry Torokhov
2019-08-22 3:37 ` Jiada Wang
2019-08-16 8:28 ` [PATCH v1 04/63] Input: atmel_mxt_ts - split large i2c transfers into blocks Jiada Wang
2019-08-16 17:18 ` Dmitry Torokhov
2019-08-22 5:24 ` Jiada Wang
2019-08-16 17:32 ` [PATCH v1 00/63] atmel_mxt_ts misc Dmitry Torokhov
2019-08-19 9:29 ` Jiada Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190816082952.17985-1-jiada_wang@mentor.com \
--to=jiada_wang@mentor.com \
--cc=dmitry.torokhov@gmail.com \
--cc=george_davis@mentor.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nick@shmanahar.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®