From: Chris Chiu <chiu@endlessm.com>
To: mika.westerberg@linux.intel.com,
andriy.shevchenko@linux.intel.com, linus.walleij@linaro.org
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
linux@endlessm.com
Subject: [PATCH] pinctrl: intel: remap the pin number to gpio offset for irq enabled pin
Date: Fri, 16 Aug 2019 17:38:38 +0800 [thread overview]
Message-ID: <20190816093838.81461-1-chiu@endlessm.com> (raw)
On Asus X571GT, GPIO 297 is configured as an interrupt and serves
for the touchpad. The touchpad will report input events much less
than expected after S3 suspend/resume, which results in extremely
slow cursor movement. However, the number of interrupts observed
from /proc/interrupts increases much more than expected even no
touching touchpad.
This is due to the value of PADCFG0 of PIN 225 for the interrupt
has been changed from 0x80800102 to 0x80100102. The GPIROUTIOXAPIC
is toggled on which results in the spurious interrupts. The PADCFG0
of PIN 225 is expected to be saved during suspend, but the 297 is
saved instead because the gpiochip_line_is_irq() expect the GPIO
offset but what's really passed to it is PIN number. In this case,
the /sys/kernel/debug/pinctrl/INT3450:00/gpio-ranges shows
288: INT3450:00 GPIOS [436 - 459] PINS [216 - 239]
So gpiochip_line_is_irq() returns true for GPIO offset 297, the
suspend routine spuriously saves the content for PIN 297 which
we expect to save for PIN 225.
This commit maps the PIN number to GPIO offset first in the
intel_pinctrl_should_save() to make sure the values for the
specific PINs can be correctly saved and then restored.
Signed-off-by: Chris Chiu <chiu@endlessm.com>
---
drivers/pinctrl/intel/pinctrl-intel.c | 26 +++++++++++++++++++++++++-
1 file changed, 25 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
index a18d6eefe672..8d6a843bbc7e 100644
--- a/drivers/pinctrl/intel/pinctrl-intel.c
+++ b/drivers/pinctrl/intel/pinctrl-intel.c
@@ -796,6 +796,29 @@ static int intel_gpio_to_pin(struct intel_pinctrl *pctrl, unsigned int offset,
return -EINVAL;
}
+/**
+ * intel_pin_to_gpio() - Translate from pin number to GPIO offset
+ * @pctrl: Pinctrl structure
+ * @pin: pin number
+ *
+ * Translate the pin number of pinctrl to GPIO offset
+ */
+static int intel_pin_to_gpio(struct intel_pinctrl *pctrl, int pin)
+{
+ const struct intel_community *community;
+ const struct intel_padgroup *padgrp;
+
+ community = intel_get_community(pctrl, pin);
+ if (!community)
+ return -EINVAL;
+
+ padgrp = intel_community_get_padgroup(community, pin);
+ if (!padgrp)
+ return -EINVAL;
+
+ return pin - padgrp->base + padgrp->gpio_base;
+}
+
static int intel_gpio_get(struct gpio_chip *chip, unsigned int offset)
{
struct intel_pinctrl *pctrl = gpiochip_get_data(chip);
@@ -1443,7 +1466,8 @@ static bool intel_pinctrl_should_save(struct intel_pinctrl *pctrl, unsigned int
* them alone.
*/
if (pd->mux_owner || pd->gpio_owner ||
- gpiochip_line_is_irq(&pctrl->chip, pin))
+ gpiochip_line_is_irq(&pctrl->chip,
+ intel_pin_to_gpio(pctrl, pin)))
return true;
return false;
--
2.22.1
next reply other threads:[~2019-08-16 9:38 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-16 9:38 Chris Chiu [this message]
2019-08-19 7:14 ` Mika Westerberg
2019-08-19 9:42 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190816093838.81461-1-chiu@endlessm.com \
--to=chiu@endlessm.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@endlessm.com \
--cc=mika.westerberg@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®