mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: xiubli@redhat.com
To: josef@toxicpanda.com, axboe@kernel.dk
Cc: mchristi@redhat.com, linux-block@vger.kernel.org,
	nbd@other.debian.org, linux-kernel@vger.kernel.org,
	Xiubo Li <xiubli@redhat.com>
Subject: [PATCH v2] nbd: fix possible page fault for nbd disk
Date: Wed, 21 Aug 2019 17:27:53 +0530	[thread overview]
Message-ID: <20190821115753.3911-1-xiubli@redhat.com> (raw)

From: Xiubo Li <xiubli@redhat.com>

When the NBD_CFLAG_DESTROY_ON_DISCONNECT flag is set and at the same
time when the socket is closed due to the server daemon is restarted,
just before the last DISCONNET is totally done if we start a new connection
by using the old nbd_index, there will be crashing randomly, like:

<3>[  110.151949] block nbd1: Receive control failed (result -32)
<1>[  110.152024] BUG: unable to handle page fault for address: 0000058000000840
<1>[  110.152063] #PF: supervisor read access in kernel mode
<1>[  110.152083] #PF: error_code(0x0000) - not-present page
<6>[  110.152094] PGD 0 P4D 0
<4>[  110.152106] Oops: 0000 [#1] SMP PTI
<4>[  110.152120] CPU: 0 PID: 6698 Comm: kworker/u5:1 Kdump: loaded Not tainted 5.3.0-rc4+ #2
<4>[  110.152136] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
<4>[  110.152166] Workqueue: knbd-recv recv_work [nbd]
<4>[  110.152187] RIP: 0010:__dev_printk+0xd/0x67
<4>[  110.152206] Code: 10 e8 c5 fd ff ff 48 8b 4c 24 18 65 48 33 0c 25 28 00 [...]
<4>[  110.152244] RSP: 0018:ffffa41581f13d18 EFLAGS: 00010206
<4>[  110.152256] RAX: ffffa41581f13d30 RBX: ffff96dd7374e900 RCX: 0000000000000000
<4>[  110.152271] RDX: ffffa41581f13d20 RSI: 00000580000007f0 RDI: ffffffff970ec24f
<4>[  110.152285] RBP: ffffa41581f13d80 R08: ffff96dd7fc17908 R09: 0000000000002e56
<4>[  110.152299] R10: ffffffff970ec24f R11: 0000000000000003 R12: ffff96dd7374e900
<4>[  110.152313] R13: 0000000000000000 R14: ffff96dd7374e9d8 R15: ffff96dd6e3b02c8
<4>[  110.152329] FS:  0000000000000000(0000) GS:ffff96dd7fc00000(0000) knlGS:0000000000000000
<4>[  110.152362] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[  110.152383] CR2: 0000058000000840 CR3: 0000000067cc6002 CR4: 00000000001606f0
<4>[  110.152401] Call Trace:
<4>[  110.152422]  _dev_err+0x6c/0x83
<4>[  110.152435]  nbd_read_stat.cold+0xda/0x578 [nbd]
<4>[  110.152448]  ? __switch_to_asm+0x34/0x70
<4>[  110.152468]  ? __switch_to_asm+0x40/0x70
<4>[  110.152478]  ? __switch_to_asm+0x34/0x70
<4>[  110.152491]  ? __switch_to_asm+0x40/0x70
<4>[  110.152501]  ? __switch_to_asm+0x34/0x70
<4>[  110.152511]  ? __switch_to_asm+0x40/0x70
<4>[  110.152522]  ? __switch_to_asm+0x34/0x70
<4>[  110.152533]  recv_work+0x35/0x9e [nbd]
<4>[  110.152547]  process_one_work+0x19d/0x340
<4>[  110.152558]  worker_thread+0x50/0x3b0
<4>[  110.152568]  kthread+0xfb/0x130
<4>[  110.152577]  ? process_one_work+0x340/0x340
<4>[  110.152609]  ? kthread_park+0x80/0x80
<4>[  110.152637]  ret_from_fork+0x35/0x40

This is very easy to reproduce by running the nbd-runner.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
---
 drivers/block/nbd.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index e21d2ded732b..b07b4452d696 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -112,6 +112,8 @@ struct nbd_device {
 	struct list_head list;
 	struct task_struct *task_recv;
 	struct task_struct *task_setup;
+
+	bool shutting_down;
 };
 
 #define NBD_CMD_REQUEUED	1
@@ -230,8 +232,8 @@ static void nbd_put(struct nbd_device *nbd)
 	if (refcount_dec_and_mutex_lock(&nbd->refs,
 					&nbd_index_mutex)) {
 		idr_remove(&nbd_index_idr, nbd->index);
-		mutex_unlock(&nbd_index_mutex);
 		nbd_dev_remove(nbd);
+		mutex_unlock(&nbd_index_mutex);
 	}
 }
 
@@ -1103,6 +1105,7 @@ static int nbd_disconnect(struct nbd_device *nbd)
 
 	dev_info(disk_to_dev(nbd->disk), "NBD_DISCONNECT\n");
 	set_bit(NBD_DISCONNECT_REQUESTED, &config->runtime_flags);
+	nbd->shutting_down = true;
 	send_disconnects(nbd);
 	return 0;
 }
@@ -1761,6 +1764,12 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info)
 		mutex_unlock(&nbd_index_mutex);
 		return -EINVAL;
 	}
+
+	if (nbd->shutting_down) {
+		mutex_unlock(&nbd_index_mutex);
+		goto again;
+	}
+
 	if (!refcount_inc_not_zero(&nbd->refs)) {
 		mutex_unlock(&nbd_index_mutex);
 		if (index == -1)
-- 
2.21.0


             reply	other threads:[~2019-08-21 11:58 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-21 11:57 xiubli [this message]
2019-08-21 16:43 ` Mike Christie
2019-08-22  0:58   ` Xiubo Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190821115753.3911-1-xiubli@redhat.com \
    --to=xiubli@redhat.com \
    --cc=axboe@kernel.dk \
    --cc=josef@toxicpanda.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mchristi@redhat.com \
    --cc=nbd@other.debian.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®