From: Bjorn Helgaas <helgaas@kernel.org>
To: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>,
Keith Busch <keith.busch@intel.com>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Bjorn Helgaas <bhelgaas@google.com>
Subject: [PATCH 4/5] PCI/ATS: Cache PRI Capability offset
Date: Thu, 5 Sep 2019 14:31:45 -0500 [thread overview]
Message-ID: <20190905193146.90250-5-helgaas@kernel.org> (raw)
In-Reply-To: <20190905193146.90250-1-helgaas@kernel.org>
From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Previously each PRI interface searched for the PRI Capability. Cache the
capability offset the first time we use it instead of searching each time.
[bhelgaas: commit log, reorder patch to later, save offset directly in
pci_enable_pri() rather than adding pci_pri_init()]
Link: https://lore.kernel.org/r/0c5495d376faf6dbb8eb2165204c474438aaae65.156
7029860.git.sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
drivers/pci/ats.c | 52 ++++++++++++++++++++++-----------------------
include/linux/pci.h | 1 +
2 files changed, 27 insertions(+), 26 deletions(-)
diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
index 920deeccf38d..bc463e2ecc61 100644
--- a/drivers/pci/ats.c
+++ b/drivers/pci/ats.c
@@ -169,7 +169,7 @@ int pci_enable_pri(struct pci_dev *pdev, u32 reqs)
{
u16 control, status;
u32 max_requests;
- int pos;
+ int pri = pdev->pri_cap;
/*
* VFs must not implement the PRI Capability. If their PF
@@ -185,21 +185,24 @@ int pci_enable_pri(struct pci_dev *pdev, u32 reqs)
if (WARN_ON(pdev->pri_enabled))
return -EBUSY;
- pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
- if (!pos)
- return -EINVAL;
+ if (!pri) {
+ pri = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
+ if (!pri)
+ return -EINVAL;
+ pdev->pri_cap = pri;
+ }
- pci_read_config_word(pdev, pos + PCI_PRI_STATUS, &status);
+ pci_read_config_word(pdev, pri + PCI_PRI_STATUS, &status);
if (!(status & PCI_PRI_STATUS_STOPPED))
return -EBUSY;
- pci_read_config_dword(pdev, pos + PCI_PRI_MAX_REQ, &max_requests);
+ pci_read_config_dword(pdev, pri + PCI_PRI_MAX_REQ, &max_requests);
reqs = min(max_requests, reqs);
pdev->pri_reqs_alloc = reqs;
- pci_write_config_dword(pdev, pos + PCI_PRI_ALLOC_REQ, reqs);
+ pci_write_config_dword(pdev, pri + PCI_PRI_ALLOC_REQ, reqs);
control = PCI_PRI_CTRL_ENABLE;
- pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
+ pci_write_config_word(pdev, pri + PCI_PRI_CTRL, control);
pdev->pri_enabled = 1;
@@ -216,7 +219,7 @@ EXPORT_SYMBOL_GPL(pci_enable_pri);
void pci_disable_pri(struct pci_dev *pdev)
{
u16 control;
- int pos;
+ int pri = pdev->pri_cap;
/* VFs share the PF PRI */
if (pdev->is_virtfn)
@@ -225,13 +228,12 @@ void pci_disable_pri(struct pci_dev *pdev)
if (WARN_ON(!pdev->pri_enabled))
return;
- pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
- if (!pos)
+ if (!pri)
return;
- pci_read_config_word(pdev, pos + PCI_PRI_CTRL, &control);
+ pci_read_config_word(pdev, pri + PCI_PRI_CTRL, &control);
control &= ~PCI_PRI_CTRL_ENABLE;
- pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
+ pci_write_config_word(pdev, pri + PCI_PRI_CTRL, control);
pdev->pri_enabled = 0;
}
@@ -245,7 +247,7 @@ void pci_restore_pri_state(struct pci_dev *pdev)
{
u16 control = PCI_PRI_CTRL_ENABLE;
u32 reqs = pdev->pri_reqs_alloc;
- int pos;
+ int pri = pdev->pri_cap;
if (pdev->is_virtfn)
return;
@@ -253,12 +255,11 @@ void pci_restore_pri_state(struct pci_dev *pdev)
if (!pdev->pri_enabled)
return;
- pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
- if (!pos)
+ if (!pri)
return;
- pci_write_config_dword(pdev, pos + PCI_PRI_ALLOC_REQ, reqs);
- pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
+ pci_write_config_dword(pdev, pri + PCI_PRI_ALLOC_REQ, reqs);
+ pci_write_config_word(pdev, pri + PCI_PRI_CTRL, control);
}
EXPORT_SYMBOL_GPL(pci_restore_pri_state);
@@ -272,7 +273,7 @@ EXPORT_SYMBOL_GPL(pci_restore_pri_state);
int pci_reset_pri(struct pci_dev *pdev)
{
u16 control;
- int pos;
+ int pri = pdev->pri_cap;
if (pdev->is_virtfn)
return 0;
@@ -280,12 +281,11 @@ int pci_reset_pri(struct pci_dev *pdev)
if (WARN_ON(pdev->pri_enabled))
return -EBUSY;
- pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
- if (!pos)
+ if (!pri)
return -EINVAL;
control = PCI_PRI_CTRL_RESET;
- pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
+ pci_write_config_word(pdev, pri + PCI_PRI_CTRL, control);
return 0;
}
@@ -440,16 +440,16 @@ EXPORT_SYMBOL_GPL(pci_pasid_features);
int pci_prg_resp_pasid_required(struct pci_dev *pdev)
{
u16 status;
- int pos;
+ int pri;
if (pdev->is_virtfn)
pdev = pci_physfn(pdev);
- pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
- if (!pos)
+ pri = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
+ if (!pri)
return 0;
- pci_read_config_word(pdev, pos + PCI_PRI_STATUS, &status);
+ pci_read_config_word(pdev, pri + PCI_PRI_STATUS, &status);
if (status & PCI_PRI_STATUS_PASID)
return 1;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index a73e8d28a896..c81a24172b14 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -454,6 +454,7 @@ struct pci_dev {
u8 ats_stu; /* ATS Smallest Translation Unit */
#endif
#ifdef CONFIG_PCI_PRI
+ u16 pri_cap; /* PRI Capability offset */
u32 pri_reqs_alloc; /* Number of PRI requests allocated */
#endif
#ifdef CONFIG_PCI_PASID
--
2.23.0.187.g17f5b7556c-goog
next prev parent reply other threads:[~2019-09-05 19:32 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-05 19:31 [PATCH v8 0/5] Fix PF/VF dependency issue Bjorn Helgaas
2019-09-05 19:31 ` [PATCH 1/5] PCI/ATS: Handle sharing of PF PRI Capability with all VFs Bjorn Helgaas
2019-09-05 19:31 ` [PATCH 2/5] PCI/ATS: Handle sharing of PF PASID " Bjorn Helgaas
2019-09-05 19:31 ` [PATCH 3/5] PCI/ATS: Disable PF/VF ATS service independently Bjorn Helgaas
2019-09-05 19:31 ` Bjorn Helgaas [this message]
2019-09-05 19:31 ` [PATCH 5/5] PCI/ATS: Cache PASID Capability offset Bjorn Helgaas
2019-09-27 10:30 ` [PATCH v8 0/5] Fix PF/VF dependency issue Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190905193146.90250-5-helgaas@kernel.org \
--to=helgaas@kernel.org \
--cc=ashok.raj@intel.com \
--cc=bhelgaas@google.com \
--cc=keith.busch@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome