From: Parthiban Nallathambi <pn@denx.de>
To: robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org,
s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, linux-imx@nxp.com
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Parthiban Nallathambi <pn@denx.de>
Subject: [PATCH] ARM: dts: imx6: Extend support for Phytec phycore i.MX6ULL SoM
Date: Thu, 12 Sep 2019 22:29:28 +0200 [thread overview]
Message-ID: <20190912202928.946200-1-pn@denx.de> (raw)
Extend Phycore i.MX6UL SoM for i.MX6ULL with on board eMMC. Phycore
i.MX6ULL is deployed with same carrier board Segin as the pins are
compatible with UL version.
Signed-off-by: Parthiban Nallathambi <pn@denx.de>
---
arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi | 26 +++++++++++++++++--
.../dts/imx6ul-phytec-phyboard-segin-full.dts | 5 ++++
arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi | 24 +++++++++++++++++
3 files changed, 53 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi
diff --git a/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi b/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
index fc2997449b49..822a178ce438 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
@@ -7,7 +7,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pwm/pwm.h>
-#include "imx6ul.dtsi"
/ {
model = "Phytec phyCORE i.MX6 UltraLite";
@@ -65,7 +64,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
nand-on-flash-bbt;
- status = "okay";
+ status = "disabled";
};
&i2c1 {
@@ -90,6 +89,15 @@
status = "okay";
};
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <8>;
+ no-1-8-v;
+ non-removable;
+ status = "disabled";
+};
+
&iomuxc {
pinctrl_enet1: enet1grp {
fsl,pins = <
@@ -145,4 +153,18 @@
>;
};
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9
+ >;
+ };
};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts b/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts
index b6a1407a9d44..76f2447f2657 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts
+++ b/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts
@@ -5,6 +5,7 @@
*/
/dts-v1/;
+#include "imx6ul.dtsi"
#include "imx6ul-phytec-pcl063.dtsi"
#include "imx6ul-phytec-phyboard-segin.dtsi"
#include "imx6ul-phytec-peb-eval-01.dtsi"
@@ -37,6 +38,10 @@
status = "okay";
};
+&gpmi {
+ status = "okay";
+};
+
&i2c_rtc {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi b/arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi
new file mode 100644
index 000000000000..3f749d9f09a5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+#include "imx6ul-phytec-pcl063.dtsi"
+
+/ {
+ model = "PHYTEC phyCORE-i.MX 6ULL";
+ compatible = "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+&iomuxc {
+ /delete-node/ gpioledssomgrp;
+};
+
+&iomuxc_snvs {
+ pinctrl_gpioleds_som: gpioledssomgrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0
+ >;
+ };
+};
--
2.21.0
next reply other threads:[~2019-09-12 20:29 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-12 20:29 Parthiban Nallathambi [this message]
2019-10-06 8:23 ` Shawn Guo
2019-10-07 10:42 ` Parthiban Nallathambi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190912202928.946200-1-pn@denx.de \
--to=pn@denx.de \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®