From: "Lowry Li (Arm Technology China)" <Lowry.Li@arm.com>
To: Liviu Dudau <Liviu.Dudau@arm.com>,
"james qian wang (Arm Technology China)"
<james.qian.wang@arm.com>,
"maarten.lankhorst@linux.intel.com"
<maarten.lankhorst@linux.intel.com>,
"seanpaul@chromium.org" <seanpaul@chromium.org>,
"airlied@linux.ie" <airlied@linux.ie>,
Brian Starkey <Brian.Starkey@arm.com>,
Mihail Atanassov <Mihail.Atanassov@arm.com>
Cc: "Julien Yin (Arm Technology China)" <Julien.Yin@arm.com>,
"Jonathan Chai (Arm Technology China)" <Jonathan.Chai@arm.com>,
Ayan Halder <Ayan.Halder@arm.com>,
"dri-devel@lists.freedesktop.org"
<dri-devel@lists.freedesktop.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
nd <nd@arm.com>
Subject: [PATCH] drm/komeda: Adds register dump support for gcu, lup and dou
Date: Tue, 17 Sep 2019 11:25:44 +0000 [thread overview]
Message-ID: <20190917112525.25490-1-lowry.li@arm.com> (raw)
From: "Lowry Li (Arm Technology China)" <Lowry.Li@arm.com>
Adds to support register dump on lpu and dou of pipeline and gcu on D71
Changes since v1:
- For a constant format without additional arguments, use seq_puts()
instead of seq_printf().
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
---
.../arm/display/komeda/d71/d71_component.c | 86 ++++++++++++++++++-
.../gpu/drm/arm/display/komeda/d71/d71_dev.c | 23 ++---
.../gpu/drm/arm/display/komeda/d71/d71_dev.h | 2 +
.../gpu/drm/arm/display/komeda/komeda_dev.c | 2 +
4 files changed, 101 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
index 4073a452e24a..7ba3c135142c 100644
--- a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
+++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
@@ -1206,6 +1206,90 @@ int d71_probe_block(struct d71_dev *d71,
return err;
}
+static void d71_gcu_dump(struct d71_dev *d71, struct seq_file *sf)
+{
+ u32 v[5];
+
+ seq_puts(sf, "\n------ GCU ------\n");
+
+ get_values_from_reg(d71->gcu_addr, 0, 3, v);
+ seq_printf(sf, "GLB_ARCH_ID:\t\t0x%X\n", v[0]);
+ seq_printf(sf, "GLB_CORE_ID:\t\t0x%X\n", v[1]);
+ seq_printf(sf, "GLB_CORE_INFO:\t\t0x%X\n", v[2]);
+
+ get_values_from_reg(d71->gcu_addr, 0x10, 1, v);
+ seq_printf(sf, "GLB_IRQ_STATUS:\t\t0x%X\n", v[0]);
+
+ get_values_from_reg(d71->gcu_addr, 0xA0, 5, v);
+ seq_printf(sf, "GCU_IRQ_RAW_STATUS:\t0x%X\n", v[0]);
+ seq_printf(sf, "GCU_IRQ_CLEAR:\t\t0x%X\n", v[1]);
+ seq_printf(sf, "GCU_IRQ_MASK:\t\t0x%X\n", v[2]);
+ seq_printf(sf, "GCU_IRQ_STATUS:\t\t0x%X\n", v[3]);
+ seq_printf(sf, "GCU_STATUS:\t\t0x%X\n", v[4]);
+
+ get_values_from_reg(d71->gcu_addr, 0xD0, 3, v);
+ seq_printf(sf, "GCU_CONTROL:\t\t0x%X\n", v[0]);
+ seq_printf(sf, "GCU_CONFIG_VALID0:\t0x%X\n", v[1]);
+ seq_printf(sf, "GCU_CONFIG_VALID1:\t0x%X\n", v[2]);
+}
+
+static void d71_lpu_dump(struct d71_pipeline *pipe, struct seq_file *sf)
+{
+ u32 v[6];
+
+ seq_printf(sf, "\n------ LPU%d ------\n", pipe->base.id);
+
+ dump_block_header(sf, pipe->lpu_addr);
+
+ get_values_from_reg(pipe->lpu_addr, 0xA0, 6, v);
+ seq_printf(sf, "LPU_IRQ_RAW_STATUS:\t0x%X\n", v[0]);
+ seq_printf(sf, "LPU_IRQ_CLEAR:\t\t0x%X\n", v[1]);
+ seq_printf(sf, "LPU_IRQ_MASK:\t\t0x%X\n", v[2]);
+ seq_printf(sf, "LPU_IRQ_STATUS:\t\t0x%X\n", v[3]);
+ seq_printf(sf, "LPU_STATUS:\t\t0x%X\n", v[4]);
+ seq_printf(sf, "LPU_TBU_STATUS:\t\t0x%X\n", v[5]);
+
+ get_values_from_reg(pipe->lpu_addr, 0xC0, 1, v);
+ seq_printf(sf, "LPU_INFO:\t\t0x%X\n", v[0]);
+
+ get_values_from_reg(pipe->lpu_addr, 0xD0, 3, v);
+ seq_printf(sf, "LPU_RAXI_CONTROL:\t0x%X\n", v[0]);
+ seq_printf(sf, "LPU_WAXI_CONTROL:\t0x%X\n", v[1]);
+ seq_printf(sf, "LPU_TBU_CONTROL:\t0x%X\n", v[2]);
+}
+
+static void d71_dou_dump(struct d71_pipeline *pipe, struct seq_file *sf)
+{
+ u32 v[5];
+
+ seq_printf(sf, "\n------ DOU%d ------\n", pipe->base.id);
+
+ dump_block_header(sf, pipe->dou_addr);
+
+ get_values_from_reg(pipe->dou_addr, 0xA0, 5, v);
+ seq_printf(sf, "DOU_IRQ_RAW_STATUS:\t0x%X\n", v[0]);
+ seq_printf(sf, "DOU_IRQ_CLEAR:\t\t0x%X\n", v[1]);
+ seq_printf(sf, "DOU_IRQ_MASK:\t\t0x%X\n", v[2]);
+ seq_printf(sf, "DOU_IRQ_STATUS:\t\t0x%X\n", v[3]);
+ seq_printf(sf, "DOU_STATUS:\t\t0x%X\n", v[4]);
+}
+
+static void d71_pipeline_dump(struct komeda_pipeline *pipe, struct seq_file *sf)
+{
+ struct d71_pipeline *d71_pipe = to_d71_pipeline(pipe);
+
+ d71_lpu_dump(d71_pipe, sf);
+ d71_dou_dump(d71_pipe, sf);
+}
+
const struct komeda_pipeline_funcs d71_pipeline_funcs = {
- .downscaling_clk_check = d71_downscaling_clk_check,
+ .downscaling_clk_check = d71_downscaling_clk_check,
+ .dump_register = d71_pipeline_dump,
};
+
+void d71_dump(struct komeda_dev *mdev, struct seq_file *sf)
+{
+ struct d71_dev *d71 = mdev->chip_data;
+
+ d71_gcu_dump(d71, sf);
+}
diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c b/drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c
index d567ab7ed314..0b763ea543ac 100644
--- a/drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c
+++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c
@@ -561,17 +561,18 @@ static int d71_disconnect_iommu(struct komeda_dev *mdev)
}
static const struct komeda_dev_funcs d71_chip_funcs = {
- .init_format_table = d71_init_fmt_tbl,
- .enum_resources = d71_enum_resources,
- .cleanup = d71_cleanup,
- .irq_handler = d71_irq_handler,
- .enable_irq = d71_enable_irq,
- .disable_irq = d71_disable_irq,
- .on_off_vblank = d71_on_off_vblank,
- .change_opmode = d71_change_opmode,
- .flush = d71_flush,
- .connect_iommu = d71_connect_iommu,
- .disconnect_iommu = d71_disconnect_iommu,
+ .init_format_table = d71_init_fmt_tbl,
+ .enum_resources = d71_enum_resources,
+ .cleanup = d71_cleanup,
+ .irq_handler = d71_irq_handler,
+ .enable_irq = d71_enable_irq,
+ .disable_irq = d71_disable_irq,
+ .on_off_vblank = d71_on_off_vblank,
+ .change_opmode = d71_change_opmode,
+ .flush = d71_flush,
+ .connect_iommu = d71_connect_iommu,
+ .disconnect_iommu = d71_disconnect_iommu,
+ .dump_register = d71_dump,
};
const struct komeda_dev_funcs *
diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_dev.h b/drivers/gpu/drm/arm/display/komeda/d71/d71_dev.h
index 84f1878b647d..c7357c2b9e62 100644
--- a/drivers/gpu/drm/arm/display/komeda/d71/d71_dev.h
+++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_dev.h
@@ -49,4 +49,6 @@ int d71_probe_block(struct d71_dev *d71,
struct block_header *blk, u32 __iomem *reg);
void d71_read_block_header(u32 __iomem *reg, struct block_header *blk);
+void d71_dump(struct komeda_dev *mdev, struct seq_file *sf);
+
#endif /* !_D71_DEV_H_ */
diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_dev.c b/drivers/gpu/drm/arm/display/komeda/komeda_dev.c
index 9d4d5075cc64..4aa324d46409 100644
--- a/drivers/gpu/drm/arm/display/komeda/komeda_dev.c
+++ b/drivers/gpu/drm/arm/display/komeda/komeda_dev.c
@@ -25,6 +25,8 @@ static int komeda_register_show(struct seq_file *sf, void *x)
struct komeda_dev *mdev = sf->private;
int i;
+ seq_puts(sf, "\n====== Komeda register dump =========\n");
+
if (mdev->funcs->dump_register)
mdev->funcs->dump_register(mdev, sf);
--
2.17.1
next reply other threads:[~2019-09-17 11:26 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-17 11:25 Lowry Li (Arm Technology China) [this message]
2019-09-18 8:45 ` james qian wang (Arm Technology China)
-- strict thread matches above, loose matches on Subject: below --
2019-06-26 10:20 [PATCH] " Lowry Li (Arm Technology China)
2019-06-27 2:57 ` james qian wang (Arm Technology China)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190917112525.25490-1-lowry.li@arm.com \
--to=lowry.li@arm.com \
--cc=Ayan.Halder@arm.com \
--cc=Brian.Starkey@arm.com \
--cc=Jonathan.Chai@arm.com \
--cc=Julien.Yin@arm.com \
--cc=Liviu.Dudau@arm.com \
--cc=Mihail.Atanassov@arm.com \
--cc=airlied@linux.ie \
--cc=dri-devel@lists.freedesktop.org \
--cc=james.qian.wang@arm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=nd@arm.com \
--cc=seanpaul@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®