[PATCH] dt-bindings: display: imx: fix native-mode setting

[Martin Kaiser <martin@kaiser.cx>]

According to
Documentation/devicetree/bindings/display/panel/display-timing.txt,
native-mode is a property of the display-timings node.

If it's located outside of display-timings, the native-mode setting is
ignored and the first display timing is used.

We've already fixed the board definitions which got this wrong. Fix the
example in the imx framebuffer bindings as well.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
---
 Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
index e5a8b363d829..f4df9e83bcd2 100644
--- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
@@ -38,10 +38,10 @@ Example:
 
 	display0: display0 {
 		model = "Primeview-PD050VL1";
-		native-mode = <&timing_disp0>;
 		bits-per-pixel = <16>;
 		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
 		display-timings {
+			native-mode = <&timing_disp0>;
 			timing_disp0: 640x480 {
 				hactive = <640>;
 				vactive = <480>;
-- 
2.11.0