From: Mark Brown <broonie@kernel.org>
To: Marco Felsch <m.felsch@pengutronix.de>
Cc: broonie@kernel.org, devicetree@vger.kernel.org,
kernel@pengutronix.de, lee.jones@linaro.org, lgirdwood@gmail.com,
linux-kernel@vger.kernel.org, Mark Brown <broonie@kernel.org>,
robh+dt@kernel.org, stwiss.opensource@diasemi.com,
support.opensource@diasemi.com
Subject: Applied "regulator: da9062: fix suspend_enable/disable preparation" to the regulator tree
Date: Mon, 23 Sep 2019 22:23:04 +0100 (BST) [thread overview]
Message-ID: <20190923212304.9E3C9D02FCA@fitzroy.sirena.org.uk> (raw)
In-Reply-To: <20190917124246.11732-2-m.felsch@pengutronix.de>
The patch
regulator: da9062: fix suspend_enable/disable preparation
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.4
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From a72865f057820ea9f57597915da4b651d65eb92f Mon Sep 17 00:00:00 2001
From: Marco Felsch <m.felsch@pengutronix.de>
Date: Tue, 17 Sep 2019 14:42:42 +0200
Subject: [PATCH] regulator: da9062: fix suspend_enable/disable preparation
Currently the suspend reg_field maps to the pmic voltage selection bits
and is used during suspend_enabe/disable() and during get_mode(). This
seems to be wrong for both use cases.
Use case one (suspend_enabe/disable):
Those callbacks are used to mark a regulator device as enabled/disabled
during suspend. Marking the regulator enabled during suspend is done by
the LDOx_CONF/BUCKx_CONF bit within the LDOx_CONT/BUCKx_CONT registers.
Setting this bit tells the DA9062 PMIC state machine to keep the
regulator on in POWERDOWN mode and switch to suspend voltage.
Use case two (get_mode):
The get_mode callback is used to retrieve the active mode state. Since
the regulator-setting-A is used for the active state and
regulator-setting-B for the suspend state there is no need to check
which regulator setting is active.
Fixes: 4068e5182ada ("regulator: da9062: DA9062 regulator driver")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20190917124246.11732-2-m.felsch@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/da9062-regulator.c | 118 +++++++++++----------------
1 file changed, 47 insertions(+), 71 deletions(-)
diff --git a/drivers/regulator/da9062-regulator.c b/drivers/regulator/da9062-regulator.c
index 56f3f72d7707..710e67081d53 100644
--- a/drivers/regulator/da9062-regulator.c
+++ b/drivers/regulator/da9062-regulator.c
@@ -136,7 +136,6 @@ static int da9062_buck_set_mode(struct regulator_dev *rdev, unsigned mode)
static unsigned da9062_buck_get_mode(struct regulator_dev *rdev)
{
struct da9062_regulator *regl = rdev_get_drvdata(rdev);
- struct regmap_field *field;
unsigned int val, mode = 0;
int ret;
@@ -158,18 +157,7 @@ static unsigned da9062_buck_get_mode(struct regulator_dev *rdev)
return REGULATOR_MODE_NORMAL;
}
- /* Detect current regulator state */
- ret = regmap_field_read(regl->suspend, &val);
- if (ret < 0)
- return 0;
-
- /* Read regulator mode from proper register, depending on state */
- if (val)
- field = regl->suspend_sleep;
- else
- field = regl->sleep;
-
- ret = regmap_field_read(field, &val);
+ ret = regmap_field_read(regl->sleep, &val);
if (ret < 0)
return 0;
@@ -208,21 +196,9 @@ static int da9062_ldo_set_mode(struct regulator_dev *rdev, unsigned mode)
static unsigned da9062_ldo_get_mode(struct regulator_dev *rdev)
{
struct da9062_regulator *regl = rdev_get_drvdata(rdev);
- struct regmap_field *field;
int ret, val;
- /* Detect current regulator state */
- ret = regmap_field_read(regl->suspend, &val);
- if (ret < 0)
- return 0;
-
- /* Read regulator mode from proper register, depending on state */
- if (val)
- field = regl->suspend_sleep;
- else
- field = regl->sleep;
-
- ret = regmap_field_read(field, &val);
+ ret = regmap_field_read(regl->sleep, &val);
if (ret < 0)
return 0;
@@ -408,10 +384,10 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
__builtin_ffs((int)DA9062AA_BUCK1_MODE_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_BUCK1_MODE_MASK)) - 1),
- .suspend = REG_FIELD(DA9062AA_DVC_1,
- __builtin_ffs((int)DA9062AA_VBUCK1_SEL_MASK) - 1,
+ .suspend = REG_FIELD(DA9062AA_BUCK1_CONT,
+ __builtin_ffs((int)DA9062AA_BUCK1_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
- __builtin_clz((DA9062AA_VBUCK1_SEL_MASK)) - 1),
+ __builtin_clz(DA9062AA_BUCK1_CONF_MASK) - 1),
},
{
.desc.id = DA9061_ID_BUCK2,
@@ -444,10 +420,10 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
__builtin_ffs((int)DA9062AA_BUCK3_MODE_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_BUCK3_MODE_MASK)) - 1),
- .suspend = REG_FIELD(DA9062AA_DVC_1,
- __builtin_ffs((int)DA9062AA_VBUCK3_SEL_MASK) - 1,
+ .suspend = REG_FIELD(DA9062AA_BUCK3_CONT,
+ __builtin_ffs((int)DA9062AA_BUCK3_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
- __builtin_clz((DA9062AA_VBUCK3_SEL_MASK)) - 1),
+ __builtin_clz(DA9062AA_BUCK3_CONF_MASK) - 1),
},
{
.desc.id = DA9061_ID_BUCK3,
@@ -480,10 +456,10 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
__builtin_ffs((int)DA9062AA_BUCK4_MODE_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_BUCK4_MODE_MASK)) - 1),
- .suspend = REG_FIELD(DA9062AA_DVC_1,
- __builtin_ffs((int)DA9062AA_VBUCK4_SEL_MASK) - 1,
+ .suspend = REG_FIELD(DA9062AA_BUCK4_CONT,
+ __builtin_ffs((int)DA9062AA_BUCK4_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
- __builtin_clz((DA9062AA_VBUCK4_SEL_MASK)) - 1),
+ __builtin_clz(DA9062AA_BUCK4_CONF_MASK) - 1),
},
{
.desc.id = DA9061_ID_LDO1,
@@ -509,10 +485,10 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_LDO1_SL_B_MASK)) - 1),
.suspend_vsel_reg = DA9062AA_VLDO1_B,
- .suspend = REG_FIELD(DA9062AA_DVC_1,
- __builtin_ffs((int)DA9062AA_VLDO1_SEL_MASK) - 1,
+ .suspend = REG_FIELD(DA9062AA_LDO1_CONT,
+ __builtin_ffs((int)DA9062AA_LDO1_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
- __builtin_clz((DA9062AA_VLDO1_SEL_MASK)) - 1),
+ __builtin_clz(DA9062AA_LDO1_CONF_MASK) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO1_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -542,10 +518,10 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_LDO2_SL_B_MASK)) - 1),
.suspend_vsel_reg = DA9062AA_VLDO2_B,
- .suspend = REG_FIELD(DA9062AA_DVC_1,
- __builtin_ffs((int)DA9062AA_VLDO2_SEL_MASK) - 1,
+ .suspend = REG_FIELD(DA9062AA_LDO2_CONT,
+ __builtin_ffs((int)DA9062AA_LDO2_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
- __builtin_clz((DA9062AA_VLDO2_SEL_MASK)) - 1),
+ __builtin_clz(DA9062AA_LDO2_CONF_MASK) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO2_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -575,10 +551,10 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_LDO3_SL_B_MASK)) - 1),
.suspend_vsel_reg = DA9062AA_VLDO3_B,
- .suspend = REG_FIELD(DA9062AA_DVC_1,
- __builtin_ffs((int)DA9062AA_VLDO3_SEL_MASK) - 1,
+ .suspend = REG_FIELD(DA9062AA_LDO3_CONT,
+ __builtin_ffs((int)DA9062AA_LDO3_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
- __builtin_clz((DA9062AA_VLDO3_SEL_MASK)) - 1),
+ __builtin_clz(DA9062AA_LDO3_CONF_MASK) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO3_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -608,10 +584,10 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_LDO4_SL_B_MASK)) - 1),
.suspend_vsel_reg = DA9062AA_VLDO4_B,
- .suspend = REG_FIELD(DA9062AA_DVC_1,
- __builtin_ffs((int)DA9062AA_VLDO4_SEL_MASK) - 1,
+ .suspend = REG_FIELD(DA9062AA_LDO4_CONT,
+ __builtin_ffs((int)DA9062AA_LDO4_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
- __builtin_clz((DA9062AA_VLDO4_SEL_MASK)) - 1),
+ __builtin_clz(DA9062AA_LDO4_CONF_MASK) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO4_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -652,10 +628,10 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
__builtin_ffs((int)DA9062AA_BUCK1_MODE_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_BUCK1_MODE_MASK)) - 1),
- .suspend = REG_FIELD(DA9062AA_DVC_1,
- __builtin_ffs((int)DA9062AA_VBUCK1_SEL_MASK) - 1,
+ .suspend = REG_FIELD(DA9062AA_BUCK1_CONT,
+ __builtin_ffs((int)DA9062AA_BUCK1_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
- __builtin_clz((DA9062AA_VBUCK1_SEL_MASK)) - 1),
+ __builtin_clz(DA9062AA_BUCK1_CONF_MASK) - 1),
},
{
.desc.id = DA9062_ID_BUCK2,
@@ -688,10 +664,10 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
__builtin_ffs((int)DA9062AA_BUCK2_MODE_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_BUCK2_MODE_MASK)) - 1),
- .suspend = REG_FIELD(DA9062AA_DVC_1,
- __builtin_ffs((int)DA9062AA_VBUCK2_SEL_MASK) - 1,
+ .suspend = REG_FIELD(DA9062AA_BUCK2_CONT,
+ __builtin_ffs((int)DA9062AA_BUCK2_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
- __builtin_clz((DA9062AA_VBUCK2_SEL_MASK)) - 1),
+ __builtin_clz(DA9062AA_BUCK2_CONF_MASK) - 1),
},
{
.desc.id = DA9062_ID_BUCK3,
@@ -724,10 +700,10 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
__builtin_ffs((int)DA9062AA_BUCK3_MODE_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_BUCK3_MODE_MASK)) - 1),
- .suspend = REG_FIELD(DA9062AA_DVC_1,
- __builtin_ffs((int)DA9062AA_VBUCK3_SEL_MASK) - 1,
+ .suspend = REG_FIELD(DA9062AA_BUCK3_CONT,
+ __builtin_ffs((int)DA9062AA_BUCK3_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
- __builtin_clz((DA9062AA_VBUCK3_SEL_MASK)) - 1),
+ __builtin_clz(DA9062AA_BUCK3_CONF_MASK) - 1),
},
{
.desc.id = DA9062_ID_BUCK4,
@@ -760,10 +736,10 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
__builtin_ffs((int)DA9062AA_BUCK4_MODE_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_BUCK4_MODE_MASK)) - 1),
- .suspend = REG_FIELD(DA9062AA_DVC_1,
- __builtin_ffs((int)DA9062AA_VBUCK4_SEL_MASK) - 1,
+ .suspend = REG_FIELD(DA9062AA_BUCK4_CONT,
+ __builtin_ffs((int)DA9062AA_BUCK4_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
- __builtin_clz((DA9062AA_VBUCK4_SEL_MASK)) - 1),
+ __builtin_clz(DA9062AA_BUCK4_CONF_MASK) - 1),
},
{
.desc.id = DA9062_ID_LDO1,
@@ -789,10 +765,10 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_LDO1_SL_B_MASK)) - 1),
.suspend_vsel_reg = DA9062AA_VLDO1_B,
- .suspend = REG_FIELD(DA9062AA_DVC_1,
- __builtin_ffs((int)DA9062AA_VLDO1_SEL_MASK) - 1,
+ .suspend = REG_FIELD(DA9062AA_LDO1_CONT,
+ __builtin_ffs((int)DA9062AA_LDO1_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
- __builtin_clz((DA9062AA_VLDO1_SEL_MASK)) - 1),
+ __builtin_clz(DA9062AA_LDO1_CONF_MASK) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO1_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -822,10 +798,10 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_LDO2_SL_B_MASK)) - 1),
.suspend_vsel_reg = DA9062AA_VLDO2_B,
- .suspend = REG_FIELD(DA9062AA_DVC_1,
- __builtin_ffs((int)DA9062AA_VLDO2_SEL_MASK) - 1,
+ .suspend = REG_FIELD(DA9062AA_LDO2_CONT,
+ __builtin_ffs((int)DA9062AA_LDO2_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
- __builtin_clz((DA9062AA_VLDO2_SEL_MASK)) - 1),
+ __builtin_clz(DA9062AA_LDO2_CONF_MASK) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO2_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -855,10 +831,10 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_LDO3_SL_B_MASK)) - 1),
.suspend_vsel_reg = DA9062AA_VLDO3_B,
- .suspend = REG_FIELD(DA9062AA_DVC_1,
- __builtin_ffs((int)DA9062AA_VLDO3_SEL_MASK) - 1,
+ .suspend = REG_FIELD(DA9062AA_LDO3_CONT,
+ __builtin_ffs((int)DA9062AA_LDO3_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
- __builtin_clz((DA9062AA_VLDO3_SEL_MASK)) - 1),
+ __builtin_clz(DA9062AA_LDO3_CONF_MASK) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO3_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
@@ -888,10 +864,10 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_LDO4_SL_B_MASK)) - 1),
.suspend_vsel_reg = DA9062AA_VLDO4_B,
- .suspend = REG_FIELD(DA9062AA_DVC_1,
- __builtin_ffs((int)DA9062AA_VLDO4_SEL_MASK) - 1,
+ .suspend = REG_FIELD(DA9062AA_LDO4_CONT,
+ __builtin_ffs((int)DA9062AA_LDO4_CONF_MASK) - 1,
sizeof(unsigned int) * 8 -
- __builtin_clz((DA9062AA_VLDO4_SEL_MASK)) - 1),
+ __builtin_clz(DA9062AA_LDO4_CONF_MASK) - 1),
.oc_event = REG_FIELD(DA9062AA_STATUS_D,
__builtin_ffs((int)DA9062AA_LDO4_ILIM_MASK) - 1,
sizeof(unsigned int) * 8 -
--
2.20.1
next prev parent reply other threads:[~2019-09-23 21:30 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-17 12:42 [PATCH 0/5] DA9062 PMIC fixes and features Marco Felsch
2019-09-17 12:42 ` [PATCH 1/5] regulator: da9062: fix suspend_enable/disable preparation Marco Felsch
2019-09-18 12:41 ` Adam Thomson
2019-09-18 15:05 ` Marco Felsch
2019-09-23 16:03 ` Adam Thomson
2019-09-23 22:02 ` Marco Felsch
2019-09-24 8:58 ` Adam Thomson
2019-09-23 21:23 ` Mark Brown [this message]
2019-09-17 12:42 ` [PATCH 2/5] dt-bindings: mfd: da9062: add regulator voltage selection documentation Marco Felsch
2019-09-24 9:23 ` Adam Thomson
2019-09-25 15:51 ` Marco Felsch
2019-09-25 16:18 ` Adam Thomson
2019-09-26 8:09 ` Marco Felsch
2019-09-26 10:17 ` Adam Thomson
2019-09-26 11:43 ` Marco Felsch
2019-09-26 14:04 ` Adam Thomson
2019-09-26 14:38 ` Marco Felsch
2019-09-30 9:53 ` Adam Thomson
2019-10-02 13:45 ` Marco Felsch
2019-10-22 10:22 ` Marco Felsch
2019-09-17 12:42 ` [PATCH 3/5] regulator: da9062: add voltage selection gpio support Marco Felsch
2019-09-17 14:22 ` kbuild test robot
2019-09-17 14:34 ` Marco Felsch
2019-09-24 9:48 ` Adam Thomson
2019-09-25 15:59 ` Marco Felsch
2019-10-04 19:41 ` Linus Walleij
2019-10-07 8:59 ` Marco Felsch
2019-09-17 12:42 ` [PATCH 4/5] dt-bindings: mfd: da9062: add regulator gpio enable/disable documentation Marco Felsch
2019-09-17 12:42 ` [PATCH 5/5] regulator: da9062: add gpio based regulator dis-/enable support Marco Felsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190923212304.9E3C9D02FCA@fitzroy.sirena.org.uk \
--to=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=m.felsch@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=stwiss.opensource@diasemi.com \
--cc=support.opensource@diasemi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®