From: Mark Brown <broonie@kernel.org>
To: Phil Edworthy <phil.edworthy@renesas.com>
Cc: devicetree@vger.kernel.org,
Gareth Williams <gareth.williams.jx@renesas.com>,
Geert Uytterhoeven <geert@linux-m68k.org>,
linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org,
Mark Brown <broonie@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>
Subject: Applied "dt: spi: Add Renesas RZ/N1 binding documentation" to the spi tree
Date: Tue, 1 Oct 2019 12:41:07 +0100 (BST) [thread overview]
Message-ID: <20191001114107.EA2CF2742A30@ypsilon.sirena.org.uk> (raw)
In-Reply-To: <1568793876-9009-2-git-send-email-gareth.williams.jx@renesas.com>
The patch
dt: spi: Add Renesas RZ/N1 binding documentation
has been applied to the spi tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.5
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From da182a61fce01dbd7c4a78c68a34af110f00e36f Mon Sep 17 00:00:00 2001
From: Phil Edworthy <phil.edworthy@renesas.com>
Date: Wed, 18 Sep 2019 09:04:33 +0100
Subject: [PATCH] dt: spi: Add Renesas RZ/N1 binding documentation
The Renesas RZ/N1 SPI Controller is based on the Synopsys DW SSI, but has
additional registers for software CS control and DMA. This patch does not
address the changes required for DMA support, it simply adds the compatible
string. The CS functionality is not very useful and also not needed as
Linux can use gpios for the CS signals.
Add a compatible string to handle any unforeseen issues that may arise, and
pave the way for DMA support.
Signed-off-by: Gareth Williams <gareth.williams.jx@renesas.com>
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Link: https://lore.kernel.org/r/1568793876-9009-2-git-send-email-gareth.williams.jx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
.../devicetree/bindings/spi/renesas,rzn1-spi.txt | 11 +++++++++++
1 file changed, 11 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/renesas,rzn1-spi.txt
diff --git a/Documentation/devicetree/bindings/spi/renesas,rzn1-spi.txt b/Documentation/devicetree/bindings/spi/renesas,rzn1-spi.txt
new file mode 100644
index 000000000000..fb1a6728638d
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/renesas,rzn1-spi.txt
@@ -0,0 +1,11 @@
+Renesas RZ/N1 SPI Controller
+
+This controller is based on the Synopsys DW Synchronous Serial Interface and
+inherits all properties defined in snps,dw-apb-ssi.txt except for the
+compatible property.
+
+Required properties:
+- compatible : The device specific string followed by the generic RZ/N1 string.
+ Therefore it must be one of:
+ "renesas,r9a06g032-spi", "renesas,rzn1-spi"
+ "renesas,r9a06g033-spi", "renesas,rzn1-spi"
--
2.20.1
next prev parent reply other threads:[~2019-10-01 11:41 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-18 8:04 [PATCH v2 0/4] spi: dw: Add basic runtime PM support Gareth Williams
2019-09-18 8:04 ` [PATCH v2 1/4] dt: spi: Add Renesas RZ/N1 binding documentation Gareth Williams
2019-10-01 11:41 ` Mark Brown [this message]
2019-10-01 11:43 ` Rob Herring
2019-09-18 8:04 ` [PATCH v2 2/4] dt-bindings: snps,dw-apb-ssi: Add optional clock domain information Gareth Williams
2019-10-01 11:41 ` Applied "dt-bindings: snps,dw-apb-ssi: Add optional clock domain information" to the spi tree Mark Brown
2019-10-01 12:02 ` [PATCH v2 2/4] dt-bindings: snps,dw-apb-ssi: Add optional clock domain information Rob Herring
2019-10-01 13:50 ` Gareth Williams
2019-10-01 14:51 ` Geert Uytterhoeven
2019-09-18 8:04 ` [PATCH v2 3/4] spi: dw: Add basic runtime PM support Gareth Williams
2019-10-01 11:41 ` Applied "spi: dw: Add basic runtime PM support" to the spi tree Mark Brown
2019-09-18 8:04 ` [PATCH v2 4/4] spi: dw: Add compatible string for Renesas RZ/N1 SPI Controller Gareth Williams
2019-10-01 11:41 ` Applied "spi: dw: Add compatible string for Renesas RZ/N1 SPI Controller" to the spi tree Mark Brown
2019-09-19 13:31 ` [PATCH v2 0/4] spi: dw: Add basic runtime PM support Mark Brown
2019-09-19 15:14 ` Gareth Williams
2019-09-19 15:23 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191001114107.EA2CF2742A30@ypsilon.sirena.org.uk \
--to=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gareth.williams.jx@renesas.com \
--cc=geert@linux-m68k.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=phil.edworthy@renesas.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®