From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@kernel.org>
Cc: Balaji T K <balajitk@ti.com>,
linux-omap@vger.kernel.org, Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org, Axel Lin <axel.lin@ingics.com>
Subject: [PATCH] regulator: pbias: Get rid of struct pbias_regulator_data
Date: Mon, 7 Oct 2019 19:43:20 +0800 [thread overview]
Message-ID: <20191007114320.20977-1-axel.lin@ingics.com> (raw)
Only the desc field is really used, so use struct regulator_desc instead.
Then struct pbias_regulator_data can be removed.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/pbias-regulator.c | 69 +++++++++++------------------
1 file changed, 26 insertions(+), 43 deletions(-)
diff --git a/drivers/regulator/pbias-regulator.c b/drivers/regulator/pbias-regulator.c
index a59811060bdc..bfc15dd3f730 100644
--- a/drivers/regulator/pbias-regulator.c
+++ b/drivers/regulator/pbias-regulator.c
@@ -38,15 +38,6 @@ struct pbias_reg_info {
int n_voltages;
};
-struct pbias_regulator_data {
- struct regulator_desc desc;
- void __iomem *pbias_addr;
- struct regulator_dev *dev;
- struct regmap *syscon;
- const struct pbias_reg_info *info;
- int voltage;
-};
-
struct pbias_of_data {
unsigned int offset;
};
@@ -157,13 +148,13 @@ MODULE_DEVICE_TABLE(of, pbias_of_match);
static int pbias_regulator_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
- struct pbias_regulator_data *drvdata;
struct resource *res;
struct regulator_config cfg = { };
+ struct regulator_desc *desc;
+ struct regulator_dev *rdev;
struct regmap *syscon;
const struct pbias_reg_info *info;
- int ret = 0;
- int count, idx, data_idx = 0;
+ int ret, count, idx;
const struct pbias_of_data *data;
unsigned int offset;
@@ -172,10 +163,8 @@ static int pbias_regulator_probe(struct platform_device *pdev)
if (count < 0)
return count;
- drvdata = devm_kcalloc(&pdev->dev,
- count, sizeof(struct pbias_regulator_data),
- GFP_KERNEL);
- if (!drvdata)
+ desc = devm_kcalloc(&pdev->dev, count, sizeof(*desc), GFP_KERNEL);
+ if (!desc)
return -ENOMEM;
syscon = syscon_regmap_lookup_by_phandle(np, "syscon");
@@ -198,7 +187,7 @@ static int pbias_regulator_probe(struct platform_device *pdev)
cfg.regmap = syscon;
cfg.dev = &pdev->dev;
- for (idx = 0; idx < PBIAS_NUM_REGS && data_idx < count; idx++) {
+ for (idx = 0; idx < PBIAS_NUM_REGS && count; idx++) {
if (!pbias_matches[idx].init_data ||
!pbias_matches[idx].of_node)
continue;
@@ -207,41 +196,35 @@ static int pbias_regulator_probe(struct platform_device *pdev)
if (!info)
return -ENODEV;
- drvdata[data_idx].syscon = syscon;
- drvdata[data_idx].info = info;
- drvdata[data_idx].desc.name = info->name;
- drvdata[data_idx].desc.owner = THIS_MODULE;
- drvdata[data_idx].desc.type = REGULATOR_VOLTAGE;
- drvdata[data_idx].desc.ops = &pbias_regulator_voltage_ops;
- drvdata[data_idx].desc.volt_table = info->pbias_volt_table;
- drvdata[data_idx].desc.n_voltages = info->n_voltages;
- drvdata[data_idx].desc.enable_time = info->enable_time;
- drvdata[data_idx].desc.vsel_reg = offset;
- drvdata[data_idx].desc.vsel_mask = info->vmode;
- drvdata[data_idx].desc.enable_reg = offset;
- drvdata[data_idx].desc.enable_mask = info->enable_mask;
- drvdata[data_idx].desc.enable_val = info->enable;
- drvdata[data_idx].desc.disable_val = info->disable_val;
+ desc->name = info->name;
+ desc->owner = THIS_MODULE;
+ desc->type = REGULATOR_VOLTAGE;
+ desc->ops = &pbias_regulator_voltage_ops;
+ desc->volt_table = info->pbias_volt_table;
+ desc->n_voltages = info->n_voltages;
+ desc->enable_time = info->enable_time;
+ desc->vsel_reg = offset;
+ desc->vsel_mask = info->vmode;
+ desc->enable_reg = offset;
+ desc->enable_mask = info->enable_mask;
+ desc->enable_val = info->enable;
+ desc->disable_val = info->disable_val;
cfg.init_data = pbias_matches[idx].init_data;
- cfg.driver_data = &drvdata[data_idx];
cfg.of_node = pbias_matches[idx].of_node;
- drvdata[data_idx].dev = devm_regulator_register(&pdev->dev,
- &drvdata[data_idx].desc, &cfg);
- if (IS_ERR(drvdata[data_idx].dev)) {
- ret = PTR_ERR(drvdata[data_idx].dev);
+ rdev = devm_regulator_register(&pdev->dev, desc, &cfg);
+ if (IS_ERR(rdev)) {
+ ret = PTR_ERR(rdev);
dev_err(&pdev->dev,
"Failed to register regulator: %d\n", ret);
- goto err_regulator;
+ return ret;
}
- data_idx++;
+ desc++;
+ count--;
}
- platform_set_drvdata(pdev, drvdata);
-
-err_regulator:
- return ret;
+ return 0;
}
static struct platform_driver pbias_regulator_driver = {
--
2.20.1
next reply other threads:[~2019-10-07 11:43 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-07 11:43 Axel Lin [this message]
2019-10-07 13:03 ` Applied "regulator: pbias: Get rid of struct pbias_regulator_data" to the regulator tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191007114320.20977-1-axel.lin@ingics.com \
--to=axel.lin@ingics.com \
--cc=balajitk@ti.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®