From: Arnd Bergmann <arnd@arndb.de>
To: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-kernel@vger.kernel.org, y2038@lists.linaro.org,
linux-fsdevel@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
netdev@vger.kernel.org, linux-ppp@vger.kernel.org,
Paul Mackerras <paulus@samba.org>,
"David S. Miller" <davem@davemloft.net>
Subject: [PATCH v6 39/43] compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
Date: Wed, 9 Oct 2019 21:10:40 +0200 [thread overview]
Message-ID: <20191009191044.308087-40-arnd@arndb.de> (raw)
In-Reply-To: <20191009190853.245077-1-arnd@arndb.de>
The ppp_idle structure is defined in terms of __kernel_time_t, which is
defined as 'long' on all architectures, and this usage is not affected
by the y2038 problem since it transports a time interval rather than an
absolute time.
However, the ppp user space defines the same structure as time_t, which
may be 64-bit wide on new libc versions even on 32-bit architectures.
It's easy enough to just handle both possible structure layouts on
all architectures, to deal with the possibility that a user space ppp
implementation comes with its own ppp_idle structure definition, as well
as to document the fact that the driver is y2038-safe.
Doing this also avoids the need for a special compat mode translation,
since 32-bit and 64-bit kernels now support the same interfaces. The old
32-bit structure is also available on native 64-bit architectures now,
but this is harmless.
Cc: netdev@vger.kernel.org
Cc: linux-ppp@vger.kernel.org
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
Documentation/networking/ppp_generic.txt | 2 ++
drivers/net/ppp/ppp_generic.c | 19 ++++++++----
fs/compat_ioctl.c | 38 ++++--------------------
include/uapi/linux/ppp-ioctl.h | 2 ++
include/uapi/linux/ppp_defs.h | 14 +++++++++
5 files changed, 37 insertions(+), 38 deletions(-)
diff --git a/Documentation/networking/ppp_generic.txt b/Documentation/networking/ppp_generic.txt
index 61daf4b39600..fd563aff5fc9 100644
--- a/Documentation/networking/ppp_generic.txt
+++ b/Documentation/networking/ppp_generic.txt
@@ -378,6 +378,8 @@ an interface unit are:
CONFIG_PPP_FILTER option is enabled, the set of packets which reset
the transmit and receive idle timers is restricted to those which
pass the `active' packet filter.
+ Two versions of this command exist, to deal with user space
+ expecting times as either 32-bit or 64-bit time_t seconds.
* PPPIOCSMAXCID sets the maximum connection-ID parameter (and thus the
number of connection slots) for the TCP header compressor and
diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c
index fb8e0ac099b8..ce4dd45c541d 100644
--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -612,7 +612,8 @@ static long ppp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
struct ppp_file *pf;
struct ppp *ppp;
int err = -EFAULT, val, val2, i;
- struct ppp_idle idle;
+ struct ppp_idle32 idle32;
+ struct ppp_idle64 idle64;
struct npioctl npi;
int unit, cflags;
struct slcompress *vj;
@@ -735,10 +736,18 @@ static long ppp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
err = 0;
break;
- case PPPIOCGIDLE:
- idle.xmit_idle = (jiffies - ppp->last_xmit) / HZ;
- idle.recv_idle = (jiffies - ppp->last_recv) / HZ;
- if (copy_to_user(argp, &idle, sizeof(idle)))
+ case PPPIOCGIDLE32:
+ idle32.xmit_idle = (jiffies - ppp->last_xmit) / HZ;
+ idle32.recv_idle = (jiffies - ppp->last_recv) / HZ;
+ if (copy_to_user(argp, &idle32, sizeof(idle32)))
+ break;
+ err = 0;
+ break;
+
+ case PPPIOCGIDLE64:
+ idle64.xmit_idle = (jiffies - ppp->last_xmit) / HZ;
+ idle64.recv_idle = (jiffies - ppp->last_recv) / HZ;
+ if (copy_to_user(argp, &idle64, sizeof(idle64)))
break;
err = 0;
break;
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 0b5a732d7afd..5e59101ef981 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -52,6 +52,7 @@
#include <linux/sort.h>
+#ifdef CONFIG_BLOCK
static int do_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
int err;
@@ -63,7 +64,6 @@ static int do_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
return vfs_ioctl(file, cmd, arg);
}
-#ifdef CONFIG_BLOCK
struct compat_sg_req_info { /* used by SG_GET_REQUEST_TABLE ioctl() */
char req_state;
char orphan;
@@ -99,33 +99,6 @@ static int sg_grt_trans(struct file *file,
}
#endif /* CONFIG_BLOCK */
-struct ppp_idle32 {
- compat_time_t xmit_idle;
- compat_time_t recv_idle;
-};
-#define PPPIOCGIDLE32 _IOR('t', 63, struct ppp_idle32)
-
-static int ppp_gidle(struct file *file, unsigned int cmd,
- struct ppp_idle32 __user *idle32)
-{
- struct ppp_idle __user *idle;
- __kernel_time_t xmit, recv;
- int err;
-
- idle = compat_alloc_user_space(sizeof(*idle));
-
- err = do_ioctl(file, PPPIOCGIDLE, (unsigned long) idle);
-
- if (!err) {
- if (get_user(xmit, &idle->xmit_idle) ||
- get_user(recv, &idle->recv_idle) ||
- put_user(xmit, &idle32->xmit_idle) ||
- put_user(recv, &idle32->recv_idle))
- err = -EFAULT;
- }
- return err;
-}
-
/*
* simple reversible transform to make our table more evenly
* distributed after sorting.
@@ -192,7 +165,8 @@ COMPATIBLE_IOCTL(PPPIOCGDEBUG)
COMPATIBLE_IOCTL(PPPIOCSDEBUG)
/* PPPIOCSPASS is translated */
/* PPPIOCSACTIVE is translated */
-/* PPPIOCGIDLE is translated */
+COMPATIBLE_IOCTL(PPPIOCGIDLE32)
+COMPATIBLE_IOCTL(PPPIOCGIDLE64)
COMPATIBLE_IOCTL(PPPIOCNEWUNIT)
COMPATIBLE_IOCTL(PPPIOCATTACH)
COMPATIBLE_IOCTL(PPPIOCDETACH)
@@ -214,16 +188,14 @@ COMPATIBLE_IOCTL(PPPIOCGL2TPSTATS)
static long do_ioctl_trans(unsigned int cmd,
unsigned long arg, struct file *file)
{
+#ifdef CONFIG_BLOCK
void __user *argp = compat_ptr(arg);
switch (cmd) {
- case PPPIOCGIDLE32:
- return ppp_gidle(file, cmd, argp);
-#ifdef CONFIG_BLOCK
case SG_GET_REQUEST_TABLE:
return sg_grt_trans(file, cmd, argp);
-#endif
}
+#endif
return -ENOIOCTLCMD;
}
diff --git a/include/uapi/linux/ppp-ioctl.h b/include/uapi/linux/ppp-ioctl.h
index 88b5f9990320..7bd2a5a75348 100644
--- a/include/uapi/linux/ppp-ioctl.h
+++ b/include/uapi/linux/ppp-ioctl.h
@@ -104,6 +104,8 @@ struct pppol2tp_ioc_stats {
#define PPPIOCGDEBUG _IOR('t', 65, int) /* Read debug level */
#define PPPIOCSDEBUG _IOW('t', 64, int) /* Set debug level */
#define PPPIOCGIDLE _IOR('t', 63, struct ppp_idle) /* get idle time */
+#define PPPIOCGIDLE32 _IOR('t', 63, struct ppp_idle32) /* 32-bit times */
+#define PPPIOCGIDLE64 _IOR('t', 63, struct ppp_idle64) /* 64-bit times */
#define PPPIOCNEWUNIT _IOWR('t', 62, int) /* create new ppp unit */
#define PPPIOCATTACH _IOW('t', 61, int) /* attach to ppp unit */
#define PPPIOCDETACH _IOW('t', 60, int) /* obsolete, do not use */
diff --git a/include/uapi/linux/ppp_defs.h b/include/uapi/linux/ppp_defs.h
index fff51b91b409..0039fa39a358 100644
--- a/include/uapi/linux/ppp_defs.h
+++ b/include/uapi/linux/ppp_defs.h
@@ -142,10 +142,24 @@ struct ppp_comp_stats {
/*
* The following structure records the time in seconds since
* the last NP packet was sent or received.
+ *
+ * Linux implements both 32-bit and 64-bit time_t versions
+ * for compatibility with user space that defines ppp_idle
+ * based on the libc time_t.
*/
struct ppp_idle {
__kernel_time_t xmit_idle; /* time since last NP packet sent */
__kernel_time_t recv_idle; /* time since last NP packet received */
};
+struct ppp_idle32 {
+ __s32 xmit_idle; /* time since last NP packet sent */
+ __s32 recv_idle; /* time since last NP packet received */
+};
+
+struct ppp_idle64 {
+ __s64 xmit_idle; /* time since last NP packet sent */
+ __s64 recv_idle; /* time since last NP packet received */
+};
+
#endif /* _UAPI_PPP_DEFS_H_ */
--
2.20.0
next prev parent reply other threads:[~2019-10-09 19:13 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-09 19:08 [PATCH v6 00/43] compat_ioctl: remove most of fs/compat_ioctl.c Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 01/43] fix compat handling of FICLONERANGE, FIDEDUPERANGE and FS_IOC_FIEMAP Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 02/43] FIGETBSZ: fix compat Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 03/43] compat: itanic doesn't have one Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 04/43] do_vfs_ioctl(): use saner types Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 05/43] compat: move FS_IOC_RESVSP_32 handling to fs/ioctl.c Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 06/43] compat_sys_ioctl(): make parallel to do_vfs_ioctl() Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 07/43] ceph: fix compat_ioctl for ceph_dir_operations Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 08/43] compat_ioctl: drop FIOQSIZE table entry Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 09/43] compat_ioctl: add compat_ptr_ioctl() Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 10/43] compat_ioctl: move rtc handling into rtc-dev.c Arnd Bergmann
2019-10-09 19:25 ` Alexandre Belloni
2019-10-09 19:31 ` Arnd Bergmann
2019-10-17 13:42 ` [Y2038] " Ben Hutchings
2019-10-17 14:33 ` Arnd Bergmann
2019-10-17 18:19 ` Ben Hutchings
2019-10-22 4:30 ` Al Viro
2019-10-22 12:14 ` Arnd Bergmann
2019-10-23 10:29 ` Alexandre Belloni
2019-10-23 14:28 ` Arnd Bergmann
2019-10-23 14:34 ` Alexandre Belloni
2019-10-23 15:02 ` Arnd Bergmann
2019-10-23 10:32 ` Alexandre Belloni
2019-10-09 19:10 ` [PATCH v6 11/43] compat_ioctl: move drivers to compat_ptr_ioctl Arnd Bergmann
2019-10-14 19:30 ` Jarkko Sakkinen
2019-10-22 4:34 ` Al Viro
2019-10-22 10:26 ` Arnd Bergmann
2019-10-23 3:17 ` Al Viro
2019-10-23 15:26 ` Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 12/43] compat_ioctl: move more " Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 13/43] compat_ioctl: use correct compat_ptr() translation in drivers Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 14/43] compat_ioctl: move tape handling into drivers Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 15/43] compat_ioctl: move ATYFB_CLK handling to atyfb driver Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 16/43] compat_ioctl: move isdn/capi ioctl translation into driver Arnd Bergmann
2019-10-17 18:25 ` [Y2038] " Ben Hutchings
2019-10-18 14:18 ` Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 17/43] compat_ioctl: move rfcomm handlers " Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 18/43] compat_ioctl: move hci_sock " Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 19/43] compat_ioctl: remove HCIUART handling Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 20/43] compat_ioctl: remove HIDIO translation Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 21/43] compat_ioctl: remove translation for sound ioctls Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 22/43] compat_ioctl: remove IGNORE_IOCTL() Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 23/43] compat_ioctl: remove /dev/random commands Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 24/43] compat_ioctl: remove joystick ioctl translation Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 25/43] compat_ioctl: remove PCI " Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 26/43] compat_ioctl: remove /dev/raw " Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 27/43] compat_ioctl: remove last RAID handling code Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 28/43] compat_ioctl: remove unused convert_in_user macro Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 29/43] gfs2: add compat_ioctl support Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 29/43] REPLACE " Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 30/43] fs: compat_ioctl: move FITRIM emulation into file systems Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 31/43] compat_ioctl: move WDIOC handling into wdt drivers Arnd Bergmann
2019-10-18 12:49 ` [Y2038] " Ben Hutchings
2019-10-18 13:31 ` Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 32/43] compat_ioctl: reimplement SG_IO handling Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 33/43] af_unix: add compat_ioctl support Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 34/43] compat_ioctl: handle SIOCOUTQNSD Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 35/43] compat_ioctl: move SIOCOUTQ out of compat_ioctl.c Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 36/43] tty: handle compat PPP ioctls Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 37/43] compat_ioctl: unify copy-in of ppp filters Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 38/43] compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic Arnd Bergmann
2019-10-09 19:10 ` Arnd Bergmann [this message]
2019-10-09 19:10 ` [PATCH v6 40/43] compat_ioctl: ppp: move simple commands into ppp_generic.c Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 41/43] compat_ioctl: move SG_GET_REQUEST_TABLE handling Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 42/43] pktcdvd: add compat_ioctl handler Arnd Bergmann
2019-10-09 19:10 ` [PATCH v6 43/43] scsi: sd: enable compat ioctls for sed-opal Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191009191044.308087-40-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-ppp@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=paulus@samba.org \
--cc=viro@zeniv.linux.org.uk \
--cc=y2038@lists.linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®