mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sean Paul <sean@poorly.run>
To: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Cc: robdclark@gmail.com, sean@poorly.run, airlied@linux.ie,
	daniel@ffwll.ch, linux-arm-msm@vger.kernel.org,
	dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] drm/msm/dsi: Implement reset correctly
Date: Thu, 10 Oct 2019 14:45:44 -0400	[thread overview]
Message-ID: <20191010184544.GK85762@art_vandelay> (raw)
In-Reply-To: <20191009213454.32891-1-jeffrey.l.hugo@gmail.com>

On Wed, Oct 09, 2019 at 02:34:54PM -0700, Jeffrey Hugo wrote:
> On msm8998, vblank timeouts are observed because the DSI controller is not
> reset properly, which ends up stalling the MDP.  This is because the reset
> logic is not correct per the hardware documentation.
> 
> The documentation states that after asserting reset, software should wait
> some time (no indication of how long), or poll the status register until it
> returns 0 before deasserting reset.
> 
> wmb() is insufficient for this purpose since it just ensures ordering, not
> timing between writes.  Since asserting and deasserting reset occurs on the
> same register, ordering is already guaranteed by the architecture, making
> the wmb extraneous.
> 
> Since we would define a timeout for polling the status register to avoid a
> possible infinite loop, lets just use a static delay of 20 ms, since 16.666
> ms is the time available to process one frame at 60 fps.
> 
> Fixes: a689554ba6ed (drm/msm: Initial add DSI connector support)
> Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
> ---
> 
> Rob et al, is it possible for this to go into a 5.4-rc?
> 
>  drivers/gpu/drm/msm/dsi/dsi_host.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index 663ff9f4fac9..68ded9b4735d 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -986,7 +986,7 @@ static void dsi_sw_reset(struct msm_dsi_host *msm_host)
>  	wmb(); /* clocks need to be enabled before reset */
>  
>  	dsi_write(msm_host, REG_DSI_RESET, 1);
> -	wmb(); /* make sure reset happen */
> +	msleep(20); /* make sure reset happen */

Could you please pull this out into a #define used for both in case we decide to
tweak it? I don't want these 2 values to drift.

Thanks,
Sean

>  	dsi_write(msm_host, REG_DSI_RESET, 0);
>  }
>  
> @@ -1396,7 +1396,7 @@ static void dsi_sw_reset_restore(struct msm_dsi_host *msm_host)
>  
>  	/* dsi controller can only be reset while clocks are running */
>  	dsi_write(msm_host, REG_DSI_RESET, 1);
> -	wmb();	/* make sure reset happen */
> +	msleep(20);	/* make sure reset happen */
>  	dsi_write(msm_host, REG_DSI_RESET, 0);
>  	wmb();	/* controller out of reset */
>  	dsi_write(msm_host, REG_DSI_CTRL, data0);
> -- 
> 2.17.1
> 

-- 
Sean Paul, Software Engineer, Google / Chromium OS

  reply	other threads:[~2019-10-10 18:46 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-09 21:34 Jeffrey Hugo
2019-10-10 18:45 ` Sean Paul [this message]
2019-10-10 18:48   ` Sean Paul
2019-10-10 18:59     ` Jeffrey Hugo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191010184544.GK85762@art_vandelay \
    --to=sean@poorly.run \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=jeffrey.l.hugo@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robdclark@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®