From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Andreas Klinger <ak@it-klinger.de>,
Stable@vger.kernel.org,
Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 4.14 54/65] iio: adc: hx711: fix bug in sampling of data
Date: Wed, 16 Oct 2019 14:51:08 -0700 [thread overview]
Message-ID: <20191016214837.290861729@linuxfoundation.org> (raw)
In-Reply-To: <20191016214756.457746573@linuxfoundation.org>
From: Andreas Klinger <ak@it-klinger.de>
[ Upstream commit 4043ecfb5fc4355a090111e14faf7945ff0fdbd5 ]
Fix bug in sampling function hx711_cycle() when interrupt occures while
PD_SCK is high. If PD_SCK is high for at least 60 us power down mode of
the sensor is entered which in turn leads to a wrong measurement.
Switch off interrupts during a PD_SCK high period and move query of DOUT
to the latest point of time which is at the end of PD_SCK low period.
This bug exists in the driver since it's initial addition. The more
interrupts on the system the higher is the probability that it happens.
Fixes: c3b2fdd0ea7e ("iio: adc: hx711: Add IIO driver for AVIA HX711")
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iio/adc/hx711.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/iio/adc/hx711.c b/drivers/iio/adc/hx711.c
index 8eb3f1bbe332b..0dec733471d56 100644
--- a/drivers/iio/adc/hx711.c
+++ b/drivers/iio/adc/hx711.c
@@ -101,14 +101,14 @@ struct hx711_data {
static int hx711_cycle(struct hx711_data *hx711_data)
{
- int val;
+ unsigned long flags;
/*
* if preempted for more then 60us while PD_SCK is high:
* hx711 is going in reset
* ==> measuring is false
*/
- preempt_disable();
+ local_irq_save(flags);
gpiod_set_value(hx711_data->gpiod_pd_sck, 1);
/*
@@ -118,7 +118,6 @@ static int hx711_cycle(struct hx711_data *hx711_data)
*/
ndelay(hx711_data->data_ready_delay_ns);
- val = gpiod_get_value(hx711_data->gpiod_dout);
/*
* here we are not waiting for 0.2 us as suggested by the datasheet,
* because the oscilloscope showed in a test scenario
@@ -126,7 +125,7 @@ static int hx711_cycle(struct hx711_data *hx711_data)
* and 0.56 us for PD_SCK low on TI Sitara with 800 MHz
*/
gpiod_set_value(hx711_data->gpiod_pd_sck, 0);
- preempt_enable();
+ local_irq_restore(flags);
/*
* make it a square wave for addressing cases with capacitance on
@@ -134,7 +133,8 @@ static int hx711_cycle(struct hx711_data *hx711_data)
*/
ndelay(hx711_data->data_ready_delay_ns);
- return val;
+ /* sample as late as possible */
+ return gpiod_get_value(hx711_data->gpiod_dout);
}
static int hx711_read(struct hx711_data *hx711_data)
--
2.20.1
next prev parent reply other threads:[~2019-10-16 22:11 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-16 21:50 [PATCH 4.14 00/65] 4.14.150-stable review Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 01/65] panic: ensure preemption is disabled during panic() Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 02/65] f2fs: use EINVAL for superblock with invalid magic Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 03/65] USB: rio500: Remove Rio 500 kernel driver Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 04/65] USB: yurex: Dont retry on unexpected errors Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 05/65] USB: yurex: fix NULL-derefs on disconnect Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 06/65] USB: usb-skeleton: fix runtime PM after driver unbind Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 07/65] USB: usb-skeleton: fix NULL-deref on disconnect Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 08/65] xhci: Fix false warning message about wrong bounce buffer write length Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 09/65] xhci: Prevent device initiated U1/U2 link pm if exit latency is too long Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 10/65] xhci: Check all endpoints for LPM timeout Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 11/65] usb: xhci: wait for CNR controller not ready bit in xhci resume Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 12/65] xhci: Increase STS_SAVE timeout in xhci_suspend() Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 13/65] USB: adutux: remove redundant variable minor Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 14/65] USB: adutux: fix use-after-free on disconnect Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 15/65] USB: adutux: fix NULL-derefs " Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 16/65] USB: adutux: fix use-after-free on release Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 17/65] USB: iowarrior: fix use-after-free on disconnect Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 18/65] USB: iowarrior: fix use-after-free on release Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 19/65] USB: iowarrior: fix use-after-free after driver unbind Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 20/65] USB: usblp: fix runtime PM " Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 21/65] USB: chaoskey: fix use-after-free on release Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 22/65] USB: ldusb: fix NULL-derefs on driver unbind Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 23/65] serial: uartlite: fix exit path null pointer Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 24/65] USB: serial: keyspan: fix NULL-derefs on open() and write() Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 25/65] USB: serial: ftdi_sio: add device IDs for Sienna and Echelon PL-20 Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 26/65] USB: serial: option: add Telit FN980 compositions Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 27/65] USB: serial: option: add support for Cinterion CLS8 devices Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 28/65] USB: serial: fix runtime PM after driver unbind Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 29/65] USB: usblcd: fix I/O after disconnect Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 30/65] USB: microtek: fix info-leak at probe Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 31/65] USB: dummy-hcd: fix power budget for SuperSpeed mode Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 32/65] usb: renesas_usbhs: gadget: Do not discard queues in usb_ep_set_{halt,wedge}() Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 33/65] usb: renesas_usbhs: gadget: Fix usb_ep_set_{halt,wedge}() behavior Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 34/65] USB: legousbtower: fix slab info leak at probe Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 35/65] USB: legousbtower: fix deadlock on disconnect Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 36/65] USB: legousbtower: fix potential NULL-deref " Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 37/65] USB: legousbtower: fix open after failed reset request Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 38/65] USB: legousbtower: fix use-after-free on release Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 39/65] staging: vt6655: Fix memory leak in vt6655_probe Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 40/65] iio: adc: ad799x: fix probe error handling Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 41/65] iio: adc: axp288: Override TS pin bias current for some models Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 42/65] iio: light: opt3001: fix mutex unlock race Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 43/65] efivar/ssdt: Dont iterate over EFI vars if no SSDT override was specified Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 44/65] perf llvm: Dont access out-of-scope array Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.14 45/65] perf inject jit: Fix JIT_CODE_MOVE filename Greg Kroah-Hartman
2019-10-16 21:51 ` [PATCH 4.14 46/65] CIFS: Gracefully handle QueryInfo errors during open Greg Kroah-Hartman
2019-10-16 21:51 ` [PATCH 4.14 47/65] CIFS: Force revalidate inode when dentry is stale Greg Kroah-Hartman
2019-10-16 21:51 ` [PATCH 4.14 48/65] CIFS: Force reval dentry if LOOKUP_REVAL flag is set Greg Kroah-Hartman
2019-10-16 21:51 ` [PATCH 4.14 49/65] kernel/sysctl.c: do not override max_threads provided by userspace Greg Kroah-Hartman
2019-10-16 21:51 ` [PATCH 4.14 50/65] firmware: google: increment VPD key_len properly Greg Kroah-Hartman
2019-10-16 21:51 ` [PATCH 4.14 51/65] gpiolib: dont clear FLAG_IS_OUT when emulating open-drain/open-source Greg Kroah-Hartman
2019-10-16 21:51 ` [PATCH 4.14 52/65] Staging: fbtft: fix memory leak in fbtft_framebuffer_alloc Greg Kroah-Hartman
2019-10-16 21:51 ` [PATCH 4.14 53/65] iio: hx711: add delay until DOUT is ready Greg Kroah-Hartman
2019-10-16 21:51 ` Greg Kroah-Hartman [this message]
2019-10-16 21:51 ` [PATCH 4.14 55/65] btrfs: fix incorrect updating of log root tree Greg Kroah-Hartman
2019-10-16 21:51 ` [PATCH 4.14 56/65] NFS: Fix O_DIRECT accounting of number of bytes read/written Greg Kroah-Hartman
2019-10-16 21:51 ` [PATCH 4.14 57/65] MIPS: Disable Loongson MMI instructions for kernel build Greg Kroah-Hartman
2019-10-16 21:51 ` [PATCH 4.14 58/65] Fix the locking in dcache_readdir() and friends Greg Kroah-Hartman
2019-10-16 21:51 ` [PATCH 4.14 59/65] media: stkwebcam: fix runtime PM after driver unbind Greg Kroah-Hartman
2019-10-16 21:51 ` [PATCH 4.14 60/65] tracing/hwlat: Report total time spent in all NMIs during the sample Greg Kroah-Hartman
2019-10-16 21:51 ` [PATCH 4.14 61/65] tracing/hwlat: Dont ignore outer-loop duration when calculating max_latency Greg Kroah-Hartman
2019-10-16 21:51 ` [PATCH 4.14 62/65] ftrace: Get a reference counter for the trace_array on filter files Greg Kroah-Hartman
2019-10-16 21:51 ` [PATCH 4.14 63/65] tracing: Get trace_array reference for available_tracers files Greg Kroah-Hartman
2019-10-16 21:51 ` [PATCH 4.14 64/65] x86/asm: Fix MWAITX C-state hint value Greg Kroah-Hartman
2019-10-16 21:51 ` [PATCH 4.14 65/65] xfs: clear sb->s_fs_info on mount failure Greg Kroah-Hartman
2019-10-17 1:42 ` [PATCH 4.14 00/65] 4.14.150-stable review kernelci.org bot
2019-10-17 6:22 ` Naresh Kamboju
2019-10-17 14:55 ` shuah
2019-10-17 18:03 ` Guenter Roeck
2019-10-17 18:27 ` Didik Setiawan
2019-10-18 7:57 ` Jon Hunter
2019-10-18 9:59 ` Jinpu Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191016214837.290861729@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=ak@it-klinger.de \
--cc=linux-kernel@vger.kernel.org \
--cc=sashal@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome