From: Kamel Bouhara <kamel.bouhara@bootlin.com>
To: Sebastian Reichel <sre@kernel.org>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Ludovic Desroches <ludovic.desroches@microchip.com>,
linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Kamel Bouhara <kamel.bouhara@bootlin.com>
Subject: [PATCH] power: reset: at91-reset: add sysfs interface to the power on reason
Date: Thu, 17 Oct 2019 14:40:58 +0200 [thread overview]
Message-ID: <20191017124058.19300-1-kamel.bouhara@bootlin.com> (raw)
This patch export the power on reason through the sysfs interface and
introduce some generic reset sources.
Update the ABI documentation to list current power on sources.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
---
.../sysfs-devices-platform-power-on-reason | 14 ++++++
drivers/power/reset/at91-reset.c | 44 +++++++++++++------
include/linux/power/power_on_reason.h | 19 ++++++++
3 files changed, 64 insertions(+), 13 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-devices-platform-power-on-reason
create mode 100644 include/linux/power/power_on_reason.h
diff --git a/Documentation/ABI/testing/sysfs-devices-platform-power-on-reason b/Documentation/ABI/testing/sysfs-devices-platform-power-on-reason
new file mode 100644
index 000000000000..83daeb9b1aa2
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-platform-power-on-reason
@@ -0,0 +1,14 @@
+What: /sys/devices/platform/.../power_on_reason
+
+Date: October 2019
+KernelVersion: 5.4
+Contact: Kamel Bouhara <kamel.bouhara@bootlin.com>
+Description: This file shows system power on reason.
+ The possible sources are:
+ General System Power-ON, RTC wakeup, Watchdog timeout,
+ Software Reset, User pressed reset button,
+ CPU Clock failure, 32.768kHz Oscillator Failure,
+ Low power mode exit, Unknown.
+
+ The file is read only.
+
diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c
index 44ca983a49a1..3cb2df40af37 100644
--- a/drivers/power/reset/at91-reset.c
+++ b/drivers/power/reset/at91-reset.c
@@ -17,7 +17,7 @@
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
-
+#include <linux/power/power_on_reason.h>
#include <soc/at91/at91sam9_ddrsdr.h>
#include <soc/at91/at91sam9_sdramc.h>
@@ -146,42 +146,42 @@ static int samx7_restart(struct notifier_block *this, unsigned long mode,
return NOTIFY_DONE;
}
-static void __init at91_reset_status(struct platform_device *pdev)
+static const char *at91_reset_reason(struct platform_device *pdev)
{
const char *reason;
u32 reg = readl(at91_rstc_base + AT91_RSTC_SR);
switch ((reg & AT91_RSTC_RSTTYP) >> 8) {
case RESET_TYPE_GENERAL:
- reason = "general reset";
+ reason = POWER_ON_REASON_GENERAL;
break;
case RESET_TYPE_WAKEUP:
- reason = "wakeup";
+ reason = POWER_ON_REASON_RTC;
break;
case RESET_TYPE_WATCHDOG:
- reason = "watchdog reset";
+ reason = POWER_ON_REASON_WATCHDOG;
break;
case RESET_TYPE_SOFTWARE:
- reason = "software reset";
+ reason = POWER_ON_REASON_SOFTWARE;
break;
case RESET_TYPE_USER:
- reason = "user reset";
+ reason = POWER_ON_REASON_USER;
break;
case RESET_TYPE_CPU_FAIL:
- reason = "CPU clock failure detection";
+ reason = POWER_ON_REASON_CPU_FAIL;
break;
case RESET_TYPE_XTAL_FAIL:
- reason = "32.768 kHz crystal failure detection";
+ reason = POWER_ON_REASON_XTAL_FAIL;
break;
case RESET_TYPE_ULP2:
- reason = "ULP2 reset";
+ reason = POWER_ON_REASON_LOW_POWER;
break;
default:
- reason = "unknown reset";
+ reason = POWER_ON_REASON_UNKNOWN;
break;
}
- dev_info(&pdev->dev, "Starting after %s\n", reason);
+ return reason;
}
static const struct of_device_id at91_ramc_of_match[] = {
@@ -204,6 +204,17 @@ static struct notifier_block at91_restart_nb = {
.priority = 192,
};
+static ssize_t power_on_reason_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ return sprintf(buf, "%s\n", at91_reset_reason(pdev));
+}
+
+static DEVICE_ATTR_RO(power_on_reason);
+
static int __init at91_reset_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
@@ -248,7 +259,14 @@ static int __init at91_reset_probe(struct platform_device *pdev)
return ret;
}
- at91_reset_status(pdev);
+ ret = device_create_file(&pdev->dev, &dev_attr_power_on_reason);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not create sysfs entry\n");
+ return ret;
+ }
+
+ dev_info(&pdev->dev, "Starting after %s reset\n",
+ at91_reset_reason(pdev));
return 0;
}
diff --git a/include/linux/power/power_on_reason.h b/include/linux/power/power_on_reason.h
new file mode 100644
index 000000000000..9978cc757427
--- /dev/null
+++ b/include/linux/power/power_on_reason.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Author: Kamel Bouhra <kamel.bouhara@bootlin.com>
+ */
+
+#ifndef POWER_ON_REASON_H
+#define POWER_ON_REASON_H
+
+#define POWER_ON_REASON_GENERAL "General"
+#define POWER_ON_REASON_RTC "RTC wakeup"
+#define POWER_ON_REASON_WATCHDOG "Watchdog timeout"
+#define POWER_ON_REASON_SOFTWARE "Software"
+#define POWER_ON_REASON_USER "User"
+#define POWER_ON_REASON_CPU_FAIL "CPU Clock Failure"
+#define POWER_ON_REASON_XTAL_FAIL "32.768k Crystal oscillator Failure"
+#define POWER_ON_REASON_LOW_POWER "Low power exit"
+#define POWER_ON_REASON_UNKNOWN "Unknown"
+
+#endif /* POWER_ON_REASON_H */
--
2.23.0
next reply other threads:[~2019-10-17 12:41 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-17 12:40 Kamel Bouhara [this message]
2019-11-28 14:48 ` Nicolas.Ferre
2019-11-29 10:57 ` Claudiu.Beznea
2019-11-29 11:02 ` Alexandre Belloni
2019-11-29 11:15 ` Eugen.Hristev
2019-11-29 15:40 ` Alexandre Belloni
2019-12-02 11:44 ` Kamel Bouhara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191017124058.19300-1-kamel.bouhara@bootlin.com \
--to=kamel.bouhara@bootlin.com \
--cc=alexandre.belloni@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=ludovic.desroches@microchip.com \
--cc=nicolas.ferre@microchip.com \
--cc=sre@kernel.org \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®