mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Andrew Murray <andrew.murray@arm.com>
To: Anvesh Salveru <anvesh.s@samsung.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	bhelgaas@google.com, gustavo.pimentel@synopsys.com,
	jingoohan1@gmail.com, lorenzo.pieralisi@arm.com,
	Pankaj Dubey <pankaj.dubey@samsung.com>
Subject: Re: [PATCH 2/2] PCI: dwc: Add support to handle ZRX-DC Compliant PHYs
Date: Mon, 21 Oct 2019 15:04:25 +0100	[thread overview]
Message-ID: <20191021140424.GR47056@e119886-lin.cambridge.arm.com> (raw)
In-Reply-To: <1571660993-30329-1-git-send-email-anvesh.s@samsung.com>

On Mon, Oct 21, 2019 at 05:59:53PM +0530, Anvesh Salveru wrote:
> Many platforms use DesignWare controller but the PHY can be different in
> different platforms. If the PHY is compliant is to ZRX-DC specification

s/is to/to the/

> it helps in low power consumption during power states.

s/in low/lower/

> 
> If current data rate is 8.0 GT/s or higher and PHY is not compliant to
> ZRX-DC specification, then after every 100ms link should transition to
> recovery state during the low power states.
> 
> DesignWare controller provides GEN3_ZRXDC_NONCOMPL field in
> GEN3_RELATED_OFF to specify about ZRX-DC compliant PHY.
> 
> Platforms with ZRX-DC compliant PHY can set "snps,phy-zrxdc-compliant"
> property in controller DT node to specify this property to the controller.
> 
> Signed-off-by: Anvesh Salveru <anvesh.s@samsung.com>
> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
> ---
>  drivers/pci/controller/dwc/pcie-designware.c | 7 +++++++
>  drivers/pci/controller/dwc/pcie-designware.h | 3 +++
>  2 files changed, 10 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> index 820488dfeaed..6560d9f765d7 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -556,4 +556,11 @@ void dw_pcie_setup(struct dw_pcie *pci)
>  		       PCIE_PL_CHK_REG_CHK_REG_START;
>  		dw_pcie_writel_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS, val);
>  	}
> +
> +	if (of_property_read_bool(np, "snps,phy-zrxdc-compliant")) {
> +		val = dw_pcie_readl_dbi(pci, PCIE_PORT_GEN3_RELATED);
> +		val &= ~PORT_LOGIC_GEN3_ZRXDC_NONCOMPL;
> +		dw_pcie_writel_dbi(pci, PCIE_PORT_GEN3_RELATED, val);
> +	}
> +

Given that this duplicates tegra_pcie_prepare_host in pcie-tegra194.c, can
we update that driver to adopt this new binding?

Thanks,

Andrew Murray

>  }
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index 5a18e94e52c8..427a55ec43c6 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -60,6 +60,9 @@
>  #define PCIE_MSI_INTR0_MASK		0x82C
>  #define PCIE_MSI_INTR0_STATUS		0x830
>  
> +#define PCIE_PORT_GEN3_RELATED		0x890
> +#define PORT_LOGIC_GEN3_ZRXDC_NONCOMPL		BIT(0)
> +
>  #define PCIE_ATU_VIEWPORT		0x900
>  #define PCIE_ATU_REGION_INBOUND		BIT(31)
>  #define PCIE_ATU_REGION_OUTBOUND	0
> -- 
> 2.17.1
> 

  reply	other threads:[~2019-10-21 14:04 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20191021123016epcas5p3ab7100162a8d6d803b117976240f20b4@epcas5p3.samsung.com>
2019-10-21 12:29 ` Anvesh Salveru
2019-10-21 14:04   ` Andrew Murray [this message]
2019-10-21 14:14     ` Pankaj Dubey
2019-10-21 14:17       ` Andrew Murray
2019-10-21 14:26         ` Pankaj Dubey
2019-10-21 14:31           ` Andrew Murray
2019-10-21 15:10   ` Gustavo Pimentel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191021140424.GR47056@e119886-lin.cambridge.arm.com \
    --to=andrew.murray@arm.com \
    --cc=anvesh.s@samsung.com \
    --cc=bhelgaas@google.com \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=jingoohan1@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=pankaj.dubey@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®