mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Adam Ford <aford173@gmail.com>
To: slongerbeam@gmail.com
Cc: linux-media@vger.kernel.org, mchehab@kernel.org,
	linux-kernel@vger.kernel.org, Adam Ford <aford173@gmail.com>
Subject: [PATCH] media: ov5640: Put max framerate into table and simplify check
Date: Fri, 25 Oct 2019 14:07:23 -0500	[thread overview]
Message-ID: <20191025190723.21105-1-aford173@gmail.com> (raw)

Currently the various modes are placed into a table, but when
ov5640_find_mode is called, it has to double check whether
or not the requested framerate is tolerated by the mode.
The determination is based on checking hact, vact, and frame rate.

Only 640x480 is allowed at 60fps and QSXGA is limited to 15fps, but
as the number of permitted frame rates change, this will begin to
add more and more complexity to the check.

This patch simplifies the check by adding the max framerate
allowed for each mode into the table of modes.  It then compares
the requested framerate to the max permitted in the mode's table.
This reduces the number of comparisions to one down from three
at run-time.

Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 5e495c833d32..19e10c59860b 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -189,6 +189,7 @@ struct ov5640_mode_info {
 	u32 vtot;
 	const struct reg_value *reg_data;
 	u32 reg_data_size;
+	u32 max_fps;
 };
 
 struct ov5640_ctrls {
@@ -544,6 +545,7 @@ static const struct ov5640_mode_info ov5640_mode_init_data = {
 	0, SUBSAMPLING, 640, 1896, 480, 984,
 	ov5640_init_setting_30fps_VGA,
 	ARRAY_SIZE(ov5640_init_setting_30fps_VGA),
+	OV5640_30_FPS,
 };
 
 static const struct ov5640_mode_info
@@ -551,39 +553,48 @@ ov5640_mode_data[OV5640_NUM_MODES] = {
 	{OV5640_MODE_QCIF_176_144, SUBSAMPLING,
 	 176, 1896, 144, 984,
 	 ov5640_setting_QCIF_176_144,
-	 ARRAY_SIZE(ov5640_setting_QCIF_176_144)},
+	 ARRAY_SIZE(ov5640_setting_QCIF_176_144),
+	 OV5640_30_FPS},
 	{OV5640_MODE_QVGA_320_240, SUBSAMPLING,
 	 320, 1896, 240, 984,
 	 ov5640_setting_QVGA_320_240,
-	 ARRAY_SIZE(ov5640_setting_QVGA_320_240)},
+	 ARRAY_SIZE(ov5640_setting_QVGA_320_240),
+	 OV5640_30_FPS},
 	{OV5640_MODE_VGA_640_480, SUBSAMPLING,
 	 640, 1896, 480, 1080,
 	 ov5640_setting_VGA_640_480,
-	 ARRAY_SIZE(ov5640_setting_VGA_640_480)},
+	 ARRAY_SIZE(ov5640_setting_VGA_640_480),
+	 OV5640_60_FPS},
 	{OV5640_MODE_NTSC_720_480, SUBSAMPLING,
 	 720, 1896, 480, 984,
 	 ov5640_setting_NTSC_720_480,
-	 ARRAY_SIZE(ov5640_setting_NTSC_720_480)},
+	 ARRAY_SIZE(ov5640_setting_NTSC_720_480),
+	OV5640_30_FPS},
 	{OV5640_MODE_PAL_720_576, SUBSAMPLING,
 	 720, 1896, 576, 984,
 	 ov5640_setting_PAL_720_576,
-	 ARRAY_SIZE(ov5640_setting_PAL_720_576)},
+	 ARRAY_SIZE(ov5640_setting_PAL_720_576),
+	 OV5640_30_FPS},
 	{OV5640_MODE_XGA_1024_768, SUBSAMPLING,
 	 1024, 1896, 768, 1080,
 	 ov5640_setting_XGA_1024_768,
-	 ARRAY_SIZE(ov5640_setting_XGA_1024_768)},
+	 ARRAY_SIZE(ov5640_setting_XGA_1024_768),
+	 OV5640_30_FPS},
 	{OV5640_MODE_720P_1280_720, SUBSAMPLING,
 	 1280, 1892, 720, 740,
 	 ov5640_setting_720P_1280_720,
-	 ARRAY_SIZE(ov5640_setting_720P_1280_720)},
+	 ARRAY_SIZE(ov5640_setting_720P_1280_720),
+	 OV5640_30_FPS},
 	{OV5640_MODE_1080P_1920_1080, SCALING,
 	 1920, 2500, 1080, 1120,
 	 ov5640_setting_1080P_1920_1080,
-	 ARRAY_SIZE(ov5640_setting_1080P_1920_1080)},
+	 ARRAY_SIZE(ov5640_setting_1080P_1920_1080),
+	 OV5640_30_FPS},
 	{OV5640_MODE_QSXGA_2592_1944, SCALING,
 	 2592, 2844, 1944, 1968,
 	 ov5640_setting_QSXGA_2592_1944,
-	 ARRAY_SIZE(ov5640_setting_QSXGA_2592_1944)},
+	 ARRAY_SIZE(ov5640_setting_QSXGA_2592_1944),
+	 OV5640_15_FPS},
 };
 
 static int ov5640_init_slave_id(struct ov5640_dev *sensor)
@@ -1606,14 +1617,8 @@ ov5640_find_mode(struct ov5640_dev *sensor, enum ov5640_frame_rate fr,
 	    (!nearest && (mode->hact != width || mode->vact != height)))
 		return NULL;
 
-	/* Only 640x480 can operate at 60fps (for now) */
-	if (fr == OV5640_60_FPS &&
-	    !(mode->hact == 640 && mode->vact == 480))
-		return NULL;
-
-	/* 2592x1944 only works at 15fps max */
-	if ((mode->hact == 2592 && mode->vact == 1944) &&
-	    fr > OV5640_15_FPS)
+	/* Check to see if the current mode exceeds the max frame rate */
+	if (ov5640_framerates[fr] > ov5640_framerates[mode->max_fps])
 		return NULL;
 
 	return mode;
-- 
2.17.1


             reply	other threads:[~2019-10-25 19:07 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-25 19:07 Adam Ford [this message]
2019-12-16 11:25 ` Adam Ford

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191025190723.21105-1-aford173@gmail.com \
    --to=aford173@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=slongerbeam@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®