From: Roger Quadros <rogerq@ti.com>
To: <t-kristo@ti.com>, <nm@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, Roger Quadros <rogerq@ti.com>,
Sekhar Nori <nsekhar@ti.com>
Subject: [PATCH 1/2] arm64: dts: ti: k3-j721e-main: add USB controller nodes
Date: Mon, 28 Oct 2019 11:37:29 +0200 [thread overview]
Message-ID: <20191028093730.23094-2-rogerq@ti.com> (raw)
In-Reply-To: <20191028093730.23094-1-rogerq@ti.com>
J721e has 2 USB super-speed controllers add them.
The USB2 PHY doesn't need any configuration.
USB3 PHY needs to be implemented using the Cadence
Sierra PHY. This support will be added later.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 60 +++++++++++++++++++++++
arch/arm64/boot/dts/ti/k3-j721e.dtsi | 2 +
2 files changed, 62 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 5dd2a69402e6..1e4c2b78d66d 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -536,4 +536,64 @@
dma-coherent;
no-1-8-v;
};
+
+ usbss0: cdns_usb@4104000 {
+ compatible = "ti,j721e-usb";
+ reg = <0x00 0x4104000 0x00 0x100>;
+ dma-coherent;
+ power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 288 15>, <&k3_clks 288 3>;
+ clock-names = "ref", "lpm";
+ assigned-clocks = <&k3_clks 288 15>; /* USB2_REFCLK */
+ assigned-clock-parents = <&k3_clks 288 16>; /* HFOSC0 */
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ usb0: usb@6000000 {
+ compatible = "cdns,usb3";
+ reg = <0x00 0x6000000 0x00 0x10000>,
+ <0x00 0x6010000 0x00 0x10000>,
+ <0x00 0x6020000 0x00 0x10000>;
+ reg-names = "otg", "xhci", "dev";
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */
+ interrupt-names = "host",
+ "peripheral",
+ "otg";
+ maximum-speed = "super-speed";
+ dr_mode = "otg";
+ };
+ };
+
+ usbss1: cdns_usb@4114000 {
+ compatible = "ti,j721e-usb";
+ reg = <0x00 0x4114000 0x00 0x100>;
+ dma-coherent;
+ power-domains = <&k3_pds 289 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 289 15>, <&k3_clks 289 3>;
+ clock-names = "ref", "lpm";
+ assigned-clocks = <&k3_clks 289 15>; /* USB2_REFCLK */
+ assigned-clock-parents = <&k3_clks 289 16>; /* HFOSC0 */
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ usb1: usb@6400000 {
+ compatible = "cdns,usb3";
+ reg = <0x00 0x6400000 0x00 0x10000>,
+ <0x00 0x6410000 0x00 0x10000>,
+ <0x00 0x6420000 0x00 0x10000>;
+ reg-names = "otg", "xhci", "dev";
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */
+ interrupt-names = "host",
+ "peripheral",
+ "otg";
+ maximum-speed = "super-speed";
+ dr_mode = "otg";
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
index 43ea1ba97922..ee5470edb435 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -127,6 +127,8 @@
<0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
<0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
<0x00 0x00A40000 0x00 0x00A40000 0x00 0x00000800>, /* timesync router */
+ <0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */
+ <0x00 0x06400000 0x00 0x06400000 0x00 0x00400000>, /* USBSS1 */
<0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
<0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */
<0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
next prev parent reply other threads:[~2019-10-28 9:37 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-28 9:37 [PATCH 0/2] [PATCH 0/2] arm64: dts: ti: k3-j721e: Add USB ports Roger Quadros
2019-10-28 9:37 ` Roger Quadros [this message]
2019-10-28 9:37 ` [PATCH 2/2] arm64: dts: ti: k3-j721e-common-proc-board: " Roger Quadros
2019-10-29 11:34 ` [PATCH 0/2] [PATCH 0/2] arm64: dts: ti: k3-j721e: " Roger Quadros
2019-11-08 9:43 ` Tero Kristo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191028093730.23094-2-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=nsekhar@ti.com \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®