[PATCH 2/2] clocksource/drivers/sh_mtu2: Do not loop using platform_get_irq_by_name()

[Daniel Lezcano <daniel.lezcano@linaro.org>]

From: Geert Uytterhoeven <geert+renesas@glider.be>

As platform_get_irq_by_name() now prints an error when the interrupt
does not exist, looping over possibly non-existing interrupts causes the
printing of scary messages like:

    sh_mtu2 fcff0000.timer: IRQ tgi1a not found
    sh_mtu2 fcff0000.timer: IRQ tgi2a not found

Fix this by using the platform_irq_count() helper, to avoid touching
non-existent interrupts.  Limit the returned number of interrupts to the
maximum number of channels currently supported by the driver in a
future-proof way, i.e. using ARRAY_SIZE() instead of a hardcoded number.

Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191016143003.28561-1-geert+renesas@glider.be
---
 drivers/clocksource/sh_mtu2.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index 354b27d14a19..62812f80b5cc 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -328,12 +328,13 @@ static int sh_mtu2_register(struct sh_mtu2_channel *ch, const char *name)
 	return 0;
 }
 
+static const unsigned int sh_mtu2_channel_offsets[] = {
+	0x300, 0x380, 0x000,
+};
+
 static int sh_mtu2_setup_channel(struct sh_mtu2_channel *ch, unsigned int index,
 				 struct sh_mtu2_device *mtu)
 {
-	static const unsigned int channel_offsets[] = {
-		0x300, 0x380, 0x000,
-	};
 	char name[6];
 	int irq;
 	int ret;
@@ -356,7 +357,7 @@ static int sh_mtu2_setup_channel(struct sh_mtu2_channel *ch, unsigned int index,
 		return ret;
 	}
 
-	ch->base = mtu->mapbase + channel_offsets[index];
+	ch->base = mtu->mapbase + sh_mtu2_channel_offsets[index];
 	ch->index = index;
 
 	return sh_mtu2_register(ch, dev_name(&mtu->pdev->dev));
@@ -408,7 +409,12 @@ static int sh_mtu2_setup(struct sh_mtu2_device *mtu,
 	}
 
 	/* Allocate and setup the channels. */
-	mtu->num_channels = 3;
+	ret = platform_irq_count(pdev);
+	if (ret < 0)
+		goto err_unmap;
+
+	mtu->num_channels = min_t(unsigned int, ret,
+				  ARRAY_SIZE(sh_mtu2_channel_offsets));
 
 	mtu->channels = kcalloc(mtu->num_channels, sizeof(*mtu->channels),
 				GFP_KERNEL);
-- 
2.17.1