Re: [PATCH v3 3/7] pwm: sun4i: Add an optional probe for bus clock

["Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>]

On Tue, Nov 05, 2019 at 02:14:52PM +0100, Clément Péron wrote:
> From: Jernej Skrabec <jernej.skrabec@siol.net>
> 
> H6 PWM core needs bus clock to be enabled in order to work.
> 
> Add an optional probe for it and a fallback for previous
> bindings without name on module clock.
> 
> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> Signed-off-by: Clément Péron <peron.clem@gmail.com>
> ---
>  drivers/pwm/pwm-sun4i.c | 45 +++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 43 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
> index 9ba83769a478..54e19fa56a4e 100644
> --- a/drivers/pwm/pwm-sun4i.c
> +++ b/drivers/pwm/pwm-sun4i.c
> @@ -78,6 +78,7 @@ struct sun4i_pwm_data {
>  
>  struct sun4i_pwm_chip {
>  	struct pwm_chip chip;
> +	struct clk *bus_clk;
>  	struct clk *clk;
>  	struct reset_control *rst;
>  	void __iomem *base;
> @@ -363,9 +364,35 @@ static int sun4i_pwm_probe(struct platform_device *pdev)
>  	if (IS_ERR(pwm->base))
>  		return PTR_ERR(pwm->base);
>  
> -	pwm->clk = devm_clk_get(&pdev->dev, NULL);
> -	if (IS_ERR(pwm->clk))
> +	/* Get all clocks and reset line */
> +	pwm->clk = devm_clk_get_optional(&pdev->dev, "mod");
> +	if (IS_ERR(pwm->clk)) {
> +		dev_err(&pdev->dev, "get clock failed %ld\n",
> +			PTR_ERR(pwm->clk));

Please only print this message if PTR_ERR(pwm->clk) != -EPROBE_DEFER.
You might also want to make use of commit 57f5677e535b ("printf: add
support for printing symbolic error names") and use

	dev_err(&pdev->dev, "get clock failed: %pe\n", pwm->clk);

Other than that the patch is fine for me.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |