mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Christophe Roullier <christophe.roullier@st.com>
To: <robh@kernel.org>, <davem@davemloft.net>, <joabreu@synopsys.com>,
	<mark.rutland@arm.com>, <mcoquelin.stm32@gmail.com>,
	<alexandre.torgue@st.com>, <peppe.cavallaro@st.com>
Cc: <linux-stm32@st-md-mailman.stormreply.com>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <netdev@vger.kernel.org>,
	<christophe.roullier@st.com>, <andrew@lunn.ch>
Subject: [PATCH V3 net-next 1/4] net: ethernet: stmmac: Add support for syscfg clock
Date: Wed, 6 Nov 2019 11:12:17 +0100	[thread overview]
Message-ID: <20191106101220.12693-2-christophe.roullier@st.com> (raw)
In-Reply-To: <20191106101220.12693-1-christophe.roullier@st.com>

Add optional support for syscfg clock in dwmac-stm32.c
Now Syscfg clock is activated automatically when syscfg
registers are used

Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
---
 .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 28 +++++++++++--------
 1 file changed, 16 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
index 4ef041bdf6a1..be7d58d83cfa 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
@@ -152,19 +152,24 @@ static int stm32mp1_clk_prepare(struct stm32_dwmac *dwmac, bool prepare)
 	int ret = 0;
 
 	if (prepare) {
-		ret = clk_prepare_enable(dwmac->syscfg_clk);
-		if (ret)
-			return ret;
-
+		if (dwmac->syscfg_clk) {
+			ret = clk_prepare_enable(dwmac->syscfg_clk);
+			if (ret)
+				return ret;
+		}
 		if (dwmac->clk_eth_ck) {
 			ret = clk_prepare_enable(dwmac->clk_eth_ck);
 			if (ret) {
-				clk_disable_unprepare(dwmac->syscfg_clk);
+				if (dwmac->syscfg_clk)
+					clk_disable_unprepare
+						(dwmac->syscfg_clk);
 				return ret;
 			}
 		}
 	} else {
-		clk_disable_unprepare(dwmac->syscfg_clk);
+		if (dwmac->syscfg_clk)
+			clk_disable_unprepare(dwmac->syscfg_clk);
+
 		if (dwmac->clk_eth_ck)
 			clk_disable_unprepare(dwmac->clk_eth_ck);
 	}
@@ -320,12 +325,10 @@ static int stm32mp1_parse_data(struct stm32_dwmac *dwmac,
 		return PTR_ERR(dwmac->clk_ethstp);
 	}
 
-	/*  Clock for sysconfig */
+	/*  Optional Clock for sysconfig */
 	dwmac->syscfg_clk = devm_clk_get(dev, "syscfg-clk");
-	if (IS_ERR(dwmac->syscfg_clk)) {
-		dev_err(dev, "No syscfg clock provided...\n");
-		return PTR_ERR(dwmac->syscfg_clk);
-	}
+	if (IS_ERR(dwmac->syscfg_clk))
+		dwmac->syscfg_clk = NULL;
 
 	/* Get IRQ information early to have an ability to ask for deferred
 	 * probe if needed before we went too far with resource allocation.
@@ -436,7 +439,8 @@ static int stm32mp1_suspend(struct stm32_dwmac *dwmac)
 		return ret;
 
 	clk_disable_unprepare(dwmac->clk_tx);
-	clk_disable_unprepare(dwmac->syscfg_clk);
+	if (dwmac->syscfg_clk)
+		clk_disable_unprepare(dwmac->syscfg_clk);
 	if (dwmac->clk_eth_ck)
 		clk_disable_unprepare(dwmac->clk_eth_ck);
 
-- 
2.17.1


  reply	other threads:[~2019-11-06 10:12 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-06 10:12 [PATCH V3 net-next 0/4] net: ethernet: stmmac: cleanup clock and optimization Christophe Roullier
2019-11-06 10:12 ` Christophe Roullier [this message]
2019-11-06 18:12   ` [PATCH V3 net-next 1/4] net: ethernet: stmmac: Add support for syscfg clock Andrew Lunn
2019-11-06 10:12 ` [PATCH V3 net-next 2/4] ARM: dts: stm32: remove syscfg clock on stm32mp157c ethernet Christophe Roullier
2019-11-06 10:12 ` [PATCH V3 net-next 3/4] ARM: dts: stm32: adjust slew rate for Ethernet Christophe Roullier
2019-11-06 10:12 ` [PATCH V3 net-next 4/4] ARM: dts: stm32: Enable gating of the MAC TX clock during TX low-power mode on stm32mp157c Christophe Roullier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191106101220.12693-2-christophe.roullier@st.com \
    --to=christophe.roullier@st.com \
    --cc=alexandre.torgue@st.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=joabreu@synopsys.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mark.rutland@arm.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®