From: Chuhong Yuan <hslester96@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Fugang Duan <fugang.duan@nxp.com>,
"David S . Miller" <davem@davemloft.net>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Chuhong Yuan <hslester96@gmail.com>
Subject: [PATCH net v4] net: fec: fix clock count mis-match
Date: Wed, 20 Nov 2019 09:25:13 +0800 [thread overview]
Message-ID: <20191120012513.11161-1-hslester96@gmail.com> (raw)
pm_runtime_put_autosuspend in probe will call runtime suspend to
disable clks automatically if CONFIG_PM is defined. (If CONFIG_PM
is not defined, its implementation will be empty, then runtime
suspend will not be called.)
Therefore, we can call pm_runtime_get_sync to runtime resume it
first to enable clks, which matches the runtime suspend. (Only when
CONFIG_PM is defined, otherwise pm_runtime_get_sync will also be
empty, then runtime resume will not be called.)
Then it is fine to disable clks without causing clock count mis-match.
Fixes: c43eab3eddb4 ("net: fec: add missed clk_disable_unprepare in remove")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
---
Changes in v4:
- Fix some typos.
drivers/net/ethernet/freescale/fec_main.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index a9c386b63581..4bb30761abfc 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -3636,6 +3636,11 @@ fec_drv_remove(struct platform_device *pdev)
struct net_device *ndev = platform_get_drvdata(pdev);
struct fec_enet_private *fep = netdev_priv(ndev);
struct device_node *np = pdev->dev.of_node;
+ int ret;
+
+ ret = pm_runtime_get_sync(&pdev->dev);
+ if (ret < 0)
+ return ret;
cancel_work_sync(&fep->tx_timeout_work);
fec_ptp_stop(pdev);
@@ -3643,15 +3648,17 @@ fec_drv_remove(struct platform_device *pdev)
fec_enet_mii_remove(fep);
if (fep->reg_phy)
regulator_disable(fep->reg_phy);
- pm_runtime_put(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
- clk_disable_unprepare(fep->clk_ahb);
- clk_disable_unprepare(fep->clk_ipg);
+
if (of_phy_is_fixed_link(np))
of_phy_deregister_fixed_link(np);
of_node_put(fep->phy_node);
free_netdev(ndev);
+ clk_disable_unprepare(fep->clk_ahb);
+ clk_disable_unprepare(fep->clk_ipg);
+ pm_runtime_put_noidle(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
return 0;
}
--
2.24.0
next reply other threads:[~2019-11-20 1:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-20 1:25 Chuhong Yuan [this message]
2019-11-20 1:33 ` [EXT] " Andy Duan
2019-11-20 2:59 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191120012513.11161-1-hslester96@gmail.com \
--to=hslester96@gmail.com \
--cc=davem@davemloft.net \
--cc=fugang.duan@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome