From: Simon Geis <simon.geis@fau.de>
To: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Simon Geis <simon.geis@fau.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Thomas Gleixner <tglx@linutronix.de>,
Colin Ian King <colin.king@canonical.com>,
Adam Zerella <adam.zerella@gmail.com>,
linux-kernel@vger.kernel.org, linux-kernel@i4.cs.fau.de,
Lukas Panzer <lukas.panzer@fau.de>
Subject: [PATCH 07/12] PCMCIA: change incorrect code indentation
Date: Sun, 8 Dec 2019 17:09:42 +0100 [thread overview]
Message-ID: <20191208160947.20694-8-simon.geis@fau.de> (raw)
In-Reply-To: <20191208160947.20694-2-simon.geis@fau.de>
Co-developed-by: Lukas Panzer <lukas.panzer@fau.de>
Signed-off-by: Lukas Panzer <lukas.panzer@fau.de>
Signed-off-by: Simon Geis <simon.geis@fau.de>
---
drivers/pcmcia/i82092.c | 128 ++++++++++++++++++++--------------------
1 file changed, 64 insertions(+), 64 deletions(-)
diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c
index b9366adfe087..a2be520bc3d3 100644
--- a/drivers/pcmcia/i82092.c
+++ b/drivers/pcmcia/i82092.c
@@ -82,22 +82,22 @@ static int i82092aa_pci_probe(struct pci_dev *dev, const struct pci_device_id *i
pci_read_config_byte(dev, 0x40, &configbyte); /* PCI Configuration Control */
switch (configbyte&6) {
- case 0:
- socket_count = 2;
- break;
- case 2:
- socket_count = 1;
- break;
- case 4:
- case 6:
- socket_count = 4;
- break;
-
- default:
- dev_err(&dev->dev,
- "i82092aa: Oops, you did something we didn't think of.\n");
- ret = -EIO;
- goto err_out_disable;
+ case 0:
+ socket_count = 2;
+ break;
+ case 2:
+ socket_count = 1;
+ break;
+ case 4:
+ case 6:
+ socket_count = 4;
+ break;
+
+ default:
+ dev_err(&dev->dev,
+ "i82092aa: Oops, you did something we didn't think of.\n");
+ ret = -EIO;
+ goto err_out_disable;
}
dev_info(&dev->dev, "i82092aa: configured as a %d socket device.\n",
socket_count);
@@ -502,45 +502,45 @@ static int i82092aa_set_socket(struct pcmcia_socket *socket, socket_state_t *sta
}
switch (state->Vcc) {
- case 0:
- break;
- case 50:
- dev_info(&sock_info->dev->dev,
- "setting voltage to Vcc to 5V on socket %i\n",
- sock);
- reg |= I365_VCC_5V;
- break;
- default:
- dev_err(&sock_info->dev->dev,
- "i82092aa: %s called with invalid VCC power value: %i",
- __func__, state->Vcc);
- leave("i82092aa_set_socket");
- return -EINVAL;
+ case 0:
+ break;
+ case 50:
+ dev_info(&sock_info->dev->dev,
+ "setting voltage to Vcc to 5V on socket %i\n",
+ sock);
+ reg |= I365_VCC_5V;
+ break;
+ default:
+ dev_err(&sock_info->dev->dev,
+ "i82092aa: %s called with invalid VCC power value: %i",
+ __func__, state->Vcc);
+ leave("i82092aa_set_socket");
+ return -EINVAL;
}
switch (state->Vpp) {
- case 0:
- dev_info(&sock_info->dev->dev,
- "not setting Vpp on socket %i\n",
- sock);
- break;
- case 50:
- dev_info(&sock_info->dev->dev,
- "setting Vpp to 5.0 for socket %i\n",
- sock);
- reg |= I365_VPP1_5V | I365_VPP2_5V;
- break;
- case 120:
- dev_info(&sock_info->dev->dev,
- "setting Vpp to 12.0\n");
- reg |= I365_VPP1_12V | I365_VPP2_12V;
- break;
- default:
- dev_err(&sock_info->dev->dev,
- "i82092aa: %s called with invalid VPP power value: %i",
- __func__, state->Vcc);
- leave("i82092aa_set_socket");
- return -EINVAL;
+ case 0:
+ dev_info(&sock_info->dev->dev,
+ "not setting Vpp on socket %i\n",
+ sock);
+ break;
+ case 50:
+ dev_info(&sock_info->dev->dev,
+ "setting Vpp to 5.0 for socket %i\n",
+ sock);
+ reg |= I365_VPP1_5V | I365_VPP2_5V;
+ break;
+ case 120:
+ dev_info(&sock_info->dev->dev,
+ "setting Vpp to 12.0\n");
+ reg |= I365_VPP1_12V | I365_VPP2_12V;
+ break;
+ default:
+ dev_err(&sock_info->dev->dev,
+ "i82092aa: %s called with invalid VPP power value: %i",
+ __func__, state->Vcc);
+ leave("i82092aa_set_socket");
+ return -EINVAL;
}
if (reg != indirect_read(sock, I365_POWER)) /* only write if changed */
@@ -679,17 +679,17 @@ static int i82092aa_set_mem_map(struct pcmcia_socket *socket, struct pccard_mem_
i = (region.end >> 12) & 0x0fff;
switch (to_cycles(mem->speed)) {
- case 0:
- break;
- case 1:
- i |= I365_MEM_WS0;
- break;
- case 2:
- i |= I365_MEM_WS1;
- break;
- default:
- i |= I365_MEM_WS1 | I365_MEM_WS0;
- break;
+ case 0:
+ break;
+ case 1:
+ i |= I365_MEM_WS0;
+ break;
+ case 2:
+ i |= I365_MEM_WS1;
+ break;
+ default:
+ i |= I365_MEM_WS1 | I365_MEM_WS0;
+ break;
}
indirect_write16(sock, base+I365_W_STOP, i);
@@ -731,7 +731,7 @@ static void i82092aa_module_exit(void)
enter("i82092aa_module_exit");
pci_unregister_driver(&i82092aa_pci_driver);
if (sockets[0].io_base > 0)
- release_region(sockets[0].io_base, 2);
+ release_region(sockets[0].io_base, 2);
leave("i82092aa_module_exit");
}
--
2.20.1
next prev parent reply other threads:[~2019-12-08 16:20 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-08 16:09 [PATCH 01/12] PCMCIA: use dev_err/dev_info instead of printk Simon Geis
2019-12-08 16:09 ` [PATCH 02/12] PCMCIA: remove trailing whitespaces Simon Geis
2019-12-08 16:09 ` [PATCH 03/12] PCMCIA: add/remove wrong spaces Simon Geis
2019-12-08 16:09 ` [PATCH 04/12] PCMCIA: Remove spaces before tabs Simon Geis
2019-12-08 16:09 ` [PATCH 05/12] PCMCIA: remove braces around single statement blocks Simon Geis
2019-12-08 16:09 ` [PATCH 06/12] PCMCIA: insert blank line after declarations Simon Geis
2019-12-08 16:09 ` Simon Geis [this message]
2019-12-08 16:09 ` [PATCH 08/12] PCMCIA: move assignment out of if condition Simon Geis
2019-12-08 16:09 ` [PATCH 09/12] PCMCIA: shorten the lines with over 80 characters Simon Geis
2019-12-08 20:52 ` Dominik Brodowski
2019-12-08 16:09 ` [PATCH 10/12] PCMCIA: include <linux/io.h> instead of <asm/io.h> Simon Geis
2019-12-08 20:54 ` Dominik Brodowski
2019-12-08 16:09 ` [PATCH 11/12] PCMCIA: use dev_dbg instead of enter/leave Simon Geis
2019-12-08 20:57 ` Dominik Brodowski
2019-12-08 16:09 ` [PATCH 12/12] PCMCIA: remove ifdef 0 block Simon Geis
2019-12-08 20:58 ` Dominik Brodowski
2019-12-08 20:41 ` [PATCH 01/12] PCMCIA: use dev_err/dev_info instead of printk Dominik Brodowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191208160947.20694-8-simon.geis@fau.de \
--to=simon.geis@fau.de \
--cc=adam.zerella@gmail.com \
--cc=colin.king@canonical.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@i4.cs.fau.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@dominikbrodowski.net \
--cc=lukas.panzer@fau.de \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®