From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>,
Lucas Stach <l.stach@pengutronix.de>,
Chris Healy <cphealy@gmail.com>,
Eduardo Valentin <edubezval@gmail.com>,
Angus Ainslie <angus@akkea.ca>,
linux-imx@nxp.com, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v8 09/12] thermal: qoriq: Enable all sensors before registering them
Date: Tue, 10 Dec 2019 08:41:50 -0800 [thread overview]
Message-ID: <20191210164153.10463-10-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20191210164153.10463-1-andrew.smirnov@gmail.com>
Tmu_get_temp will get called as a part of sensor registration via
devm_thermal_zone_of_sensor_register(). To prevent it from retruning
bogus data we need to enable sensor monitoring before that. Looking at
the datasheet (i.MX8MQ RM) there doesn't seem to be any harm in
enabling them all, so, for the sake of simplicity, change the code to
do just that.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: linux-imx@nxp.com
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
drivers/thermal/qoriq_thermal.c | 31 ++++++++++++-------------------
1 file changed, 12 insertions(+), 19 deletions(-)
diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index 6227c940b9b0..6c5e53ea7711 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -29,6 +29,7 @@
#define TMR_DISABLE 0x0
#define TMR_ME 0x80000000
#define TMR_ALPF 0x0c000000
+#define TMR_MSITE_ALL GENMASK(15, 0)
#define REGS_TMTMIR 0x008 /* Temperature measurement interval Register */
#define TMTMIR_DEFAULT 0x0000000f
@@ -93,7 +94,15 @@ static const struct thermal_zone_of_device_ops tmu_tz_ops = {
static int qoriq_tmu_register_tmu_zone(struct device *dev,
struct qoriq_tmu_data *qdata)
{
- int id, sites = 0;
+ int id;
+
+ if (qdata->ver == TMU_VER1) {
+ regmap_write(qdata->regmap, REGS_TMR,
+ TMR_MSITE_ALL | TMR_ME | TMR_ALPF);
+ } else {
+ regmap_write(qdata->regmap, REGS_V2_TMSR, TMR_MSITE_ALL);
+ regmap_write(qdata->regmap, REGS_TMR, TMR_ME | TMR_ALPF_V2);
+ }
for (id = 0; id < SITES_MAX; id++) {
struct thermal_zone_device *tzd;
@@ -109,25 +118,9 @@ static int qoriq_tmu_register_tmu_zone(struct device *dev,
if (ret) {
if (ret == -ENODEV)
continue;
- else
- return ret;
- }
- if (qdata->ver == TMU_VER1)
- sites |= 0x1 << (15 - id);
- else
- sites |= 0x1 << id;
- }
-
- /* Enable monitoring */
- if (sites != 0) {
- if (qdata->ver == TMU_VER1) {
- regmap_write(qdata->regmap, REGS_TMR,
- sites | TMR_ME | TMR_ALPF);
- } else {
- regmap_write(qdata->regmap, REGS_V2_TMSR, sites);
- regmap_write(qdata->regmap, REGS_TMR,
- TMR_ME | TMR_ALPF_V2);
+ regmap_write(qdata->regmap, REGS_TMR, TMR_DISABLE);
+ return ret;
}
}
--
2.21.0
next prev parent reply other threads:[~2019-12-10 16:42 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-10 16:41 [PATCH v8 00/12] QorIQ TMU multi-sensor and HWMON support Andrey Smirnov
2019-12-10 16:41 ` [PATCH v8 01/12] thermal: qoriq: Add local struct device pointer Andrey Smirnov
2019-12-10 16:41 ` [PATCH v8 02/12] thermal: qoriq: Don't store struct thermal_zone_device reference Andrey Smirnov
2019-12-10 16:41 ` [PATCH v8 03/12] thermal: qoriq: Add local struct qoriq_sensor pointer Andrey Smirnov
2019-12-10 16:41 ` [PATCH v8 04/12] thermal: qoriq: Embed per-sensor data into struct qoriq_tmu_data Andrey Smirnov
2019-12-10 16:41 ` [PATCH v8 05/12] thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly Andrey Smirnov
2019-12-10 16:41 ` [PATCH v8 06/12] thermal: qoriq: Pass data to qoriq_tmu_calibration() directly Andrey Smirnov
2019-12-10 16:41 ` [PATCH v8 07/12] thermal: qoriq: Drop unnecessary drvdata cleanup Andrey Smirnov
2019-12-10 16:41 ` [PATCH v8 08/12] thermal: qoriq: Convert driver to use regmap API Andrey Smirnov
2019-12-13 6:16 ` [EXT] " Andy Tang
2019-12-13 7:47 ` Daniel Lezcano
2019-12-13 8:52 ` Andy Tang
2019-12-10 16:41 ` Andrey Smirnov [this message]
2019-12-10 16:41 ` [PATCH v8 10/12] thermal: qoriq: Do not report invalid temperature reading Andrey Smirnov
2019-12-10 16:41 ` [PATCH v8 11/12] thermal_hwmon: Add devres wrapper for thermal_add_hwmon_sysfs() Andrey Smirnov
2019-12-10 16:41 ` [PATCH v8 12/12] thermal: qoriq: Add hwmon support Andrey Smirnov
2019-12-10 18:05 ` [PATCH v8 00/12] QorIQ TMU multi-sensor and HWMON support Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191210164153.10463-10-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=angus@akkea.ca \
--cc=cphealy@gmail.com \
--cc=daniel.lezcano@linaro.org \
--cc=edubezval@gmail.com \
--cc=l.stach@pengutronix.de \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®