[PATCH 1/4] KVM: x86: Don't let userspace set host-reserved cr4 bits

[Sean Christopherson <sean.j.christopherson@intel.com>]

Calculate the host-reserved cr4 bits at runtime based on the system's
capabilities (using logic similar to __do_cpuid_func()), and use the
dynamically generated mask for the reserved bit check in kvm_set_cr4()
instead using of the static CR4_RESERVED_BITS define.  This prevents
userspace from "enabling" features in cr4 that are not supported by the
system, e.g. by ignoring KVM_GET_SUPPORTED_CPUID and specifying a bogus
CPUID for the vCPU.

Allowing userspace to set unsupported bits in cr4 can lead to a variety
of undesirable behavior, e.g. failed VM-Enter, and in general increases
KVM's attack surface.  A crafty userspace can even abuse CR4.LA57 to
induce an unchecked #GP on a WRMSR.

On a platform without LA57 support:

  KVM_SET_CPUID2 // CPUID_7_0_ECX.LA57 = 1
  KVM_SET_SREGS  // CR4.LA57 = 1
  KVM_SET_MSRS   // KERNEL_GS_BASE = 0x0004000000000000
  KVM_RUN

leads to a #GP when writing KERNEL_GS_BASE into hardware:

  unchecked MSR access error: WRMSR to 0xc0000102 (tried to write 0x0004000000000000)
  at rIP: 0xffffffffa00f239a (vmx_prepare_switch_to_guest+0x10a/0x1d0 [kvm_intel])
  Call Trace:
   kvm_arch_vcpu_ioctl_run+0x671/0x1c70 [kvm]
   kvm_vcpu_ioctl+0x36b/0x5d0 [kvm]
   do_vfs_ioctl+0xa1/0x620
   ksys_ioctl+0x66/0x70
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x4c/0x170
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7fc08133bf47

Note, the above sequence fails VM-Enter due to invalid guest state.
Userspace can allow VM-Enter to succeed (after the WRMSR #GP) by adding
a KVM_SET_SREGS w/ CR4.LA57=0 after KVM_SET_MSRS, in which case KVM will
technically leak the host's KERNEL_GS_BASE into the guest.  But, as
KERNEL_GS_BASE is a userspace-defined value/address, the leak is largely
benign as a malicious userspace would simply be exposing its own data to
the guest, and attacking a benevolent userspace would require multiple
bugs in the userspace VMM.

Cc: stable@vger.kernel.org
Cc: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
---
 arch/x86/kvm/x86.c | 35 ++++++++++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 8bb2fb1705ff..321eecb4cffd 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -92,6 +92,8 @@ u64 __read_mostly efer_reserved_bits = ~((u64)(EFER_SCE | EFER_LME | EFER_LMA));
 static u64 __read_mostly efer_reserved_bits = ~((u64)EFER_SCE);
 #endif
 
+static u64 __read_mostly cr4_reserved_bits = CR4_RESERVED_BITS;
+
 #define VM_STAT(x, ...) offsetof(struct kvm, stat.x), KVM_STAT_VM, ## __VA_ARGS__
 #define VCPU_STAT(x, ...) offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU, ## __VA_ARGS__
 
@@ -878,9 +880,38 @@ int kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr)
 }
 EXPORT_SYMBOL_GPL(kvm_set_xcr);
 
+static u64 kvm_host_cr4_reserved_bits(struct cpuinfo_x86 *c)
+{
+	u64 reserved_bits = CR4_RESERVED_BITS;
+
+	if (!cpu_has(c, X86_FEATURE_XSAVE))
+		reserved_bits |= X86_CR4_OSXSAVE;
+
+	if (!cpu_has(c, X86_FEATURE_SMEP))
+		reserved_bits |= X86_CR4_SMEP;
+
+	if (!cpu_has(c, X86_FEATURE_SMAP))
+		reserved_bits |= X86_CR4_SMAP;
+
+	if (!cpu_has(c, X86_FEATURE_FSGSBASE))
+		reserved_bits |= X86_CR4_FSGSBASE;
+
+	if (!cpu_has(c, X86_FEATURE_PKU))
+		reserved_bits |= X86_CR4_PKE;
+
+	if (!cpu_has(c, X86_FEATURE_LA57) &&
+	    !(cpuid_ecx(0x7) & bit(X86_FEATURE_LA57)))
+		reserved_bits |= X86_CR4_LA57;
+
+	if (!cpu_has(c, X86_FEATURE_UMIP) && !kvm_x86_ops->umip_emulated())
+		reserved_bits |= X86_CR4_UMIP;
+
+	return reserved_bits;
+}
+
 static int kvm_valid_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 {
-	if (cr4 & CR4_RESERVED_BITS)
+	if (cr4 & cr4_reserved_bits)
 		return -EINVAL;
 
 	if (!guest_cpuid_has(vcpu, X86_FEATURE_XSAVE) && (cr4 & X86_CR4_OSXSAVE))
@@ -9354,6 +9385,8 @@ int kvm_arch_hardware_setup(void)
 	if (r != 0)
 		return r;
 
+	cr4_reserved_bits = kvm_host_cr4_reserved_bits(&boot_cpu_data);
+
 	if (kvm_has_tsc_control) {
 		/*
 		 * Make sure the user can only configure tsc_khz values that
-- 
2.24.0