[PATCH v2 1/2] ARM: dts: vf610-zii-scu4-aib: Use generic names for DT nodes

[Andrey Smirnov <andrew.smirnov@gmail.com>]

The devicetree specification recommends using generic node names.

Some ZII dts files already follow such recommendation, but some don't,
so use generic node names for consistency among the ZII dts files.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---

Changes since [v1]:

    - Rebased on top of 12/05 linux-next

    - Added "ARM: dts: vf610-zii-scu4-aib: Add node for switch
      watchdog" to this series, which was previously accidental and
      implicit prerequisite for this patch

[v1] lore.kernel.org/lkml/20190824002747.14610-1-andrew.smirnov@gmail.com

 arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
index d7caf618f980..a02c7ea3b92d 100644
--- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
@@ -407,7 +407,7 @@
 	pinctrl-0 = <&pinctrl_dspi1>;
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
@@ -420,7 +420,7 @@
 		};
 	};
 
-	spi-flash@1 {
+	flash@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
@@ -509,7 +509,7 @@
 		#gpio-cells = <2>;
 	};
 
-	lm75@48 {
+	temp-sensor@48 {
 		compatible = "national,lm75";
 		reg = <0x48>;
 	};
@@ -524,7 +524,7 @@
 		reg = <0x52>;
 	};
 
-	ds1682@6b {
+	elapsed-time-recorder@6b {
 		compatible = "dallas,ds1682";
 		reg = <0x6b>;
 	};
@@ -536,7 +536,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	adt7411@4a {
+	adc@4a {
 		compatible = "adi,adt7411";
 		reg = <0x4a>;
 	};
@@ -548,7 +548,7 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	gpio9: sx1503q@20 {
+	gpio9: io-expander@20 {
 		compatible = "semtech,sx1503q";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sx1503_20>;
@@ -559,12 +559,12 @@
 		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
 	};
 
-	lm75@4e {
+	temp-sensor@4e {
 		compatible = "national,lm75";
 		reg = <0x4e>;
 	};
 
-	lm75@4f {
+	temp-sensor@4f {
 		compatible = "national,lm75";
 		reg = <0x4f>;
 	};
@@ -576,17 +576,17 @@
 		reg = <0x23>;
 	};
 
-	adt7411@4a {
+	adc@4a {
 		compatible = "adi,adt7411";
 		reg = <0x4a>;
 	};
 
-	at24c08@54 {
+	eeprom@54 {
 		compatible = "atmel,24c08";
 		reg = <0x54>;
 	};
 
-	tca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-names = "default";
 		#address-cells = <1>;
@@ -625,7 +625,7 @@
 		};
 	};
 
-	tca9548@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9548";
 		pinctrl-names = "default";
 		reg = <0x71>;
-- 
2.21.0