[PATCH 2/2] net-next: dt-binding: dwmac-mediatek: add more description for RMII

[Biao Huang <biao.huang@mediatek.com>]

MT2712 SoC can provides RMII reference clock,
so add corresponding description in dt-binding.

Signed-off-by: Biao Huang <biao.huang@mediatek.com>
---
 .../devicetree/bindings/net/mediatek-dwmac.txt  | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
index 8a08621a5b54..34f692ea0406 100644
--- a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
@@ -14,7 +14,9 @@ Required properties:
 	Should be "macirq" for the main MAC IRQ
 - clocks: Must contain a phandle for each entry in clock-names.
 - clock-names: The name of the clock listed in the clocks property. These are
-	"axi", "apb", "mac_main", "ptp_ref" for MT2712 SoC
+	"axi", "apb", "mac_main", "ptp_ref" for MT2712 SoC.
+	"rmii_internal" is optional, only for RMII when the reference clock is
+	from MT2712 SoC.
 - mac-address: See ethernet.txt in the same directory
 - phy-mode: See ethernet.txt in the same directory
 - mediatek,pericfg: A phandle to the syscon node that control ethernet
@@ -23,8 +25,10 @@ Required properties:
 Optional properties:
 - mediatek,tx-delay-ps: TX clock delay macro value. Default is 0.
 	It should be defined for RGMII/MII interface.
+	It should be defined for RMII interface when the reference clock is from MT2712 SoC.
 - mediatek,rx-delay-ps: RX clock delay macro value. Default is 0.
-	It should be defined for RGMII/MII/RMII interface.
+	It should be defined for RGMII/MII interface.
+	It should be defined for RMII interface.
 Both delay properties need to be a multiple of 170 for RGMII interface,
 or will round down. Range 0~31*170.
 Both delay properties need to be a multiple of 550 for MII/RMII interface,
@@ -34,13 +38,20 @@ or will round down. Range 0~31*550.
 	reference clock, which is from external PHYs, is connected to RXC pin
 	on MT2712 SoC.
 	Otherwise, is connected to TXC pin.
+- mediatek,rmii-clk-from-mac: boolean property, if present indicates that
+	MT2712 SoC provides the RMII reference clock, which outputs to TXC pin only.
 - mediatek,txc-inverse: boolean property, if present indicates that
 	1. tx clock will be inversed in MII/RGMII case,
 	2. tx clock inside MAC will be inversed relative to reference clock
 	   which is from external PHYs in RMII case, and it rarely happen.
+	3. the reference clock, which outputs to TXC pin will be inversed in RMII case
+	   when the reference clock is from MT2712 SoC.
 - mediatek,rxc-inverse: boolean property, if present indicates that
 	1. rx clock will be inversed in MII/RGMII case.
-	2. reference clock will be inversed when arrived at MAC in RMII case.
+	2. reference clock will be inversed when arrived at MAC in RMII case, when
+	   the reference clock is from external PHYs.
+	3. the inside clock, which be sent to MAC, will be inversed in RMII case when
+	   the reference clock is from MT2712 SoC.
 - assigned-clocks: mac_main and ptp_ref clocks
 - assigned-clock-parents: parent clocks of the assigned clocks
 
-- 
2.18.0