[PATCH 2/9] spi: bcm2835: Release the DMA channel if probe fails after dma_init

[Peter Ujfalusi <peter.ujfalusi@ti.com>]

The DMA channel was not released if either devm_request_irq() or
devm_spi_register_controller() failed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/spi/spi-bcm2835.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index fb61a620effc..662d55e9f21d 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -1327,20 +1327,22 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
 			       dev_name(&pdev->dev), ctlr);
 	if (err) {
 		dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
-		goto out_clk_disable;
+		goto out_dma_release;
 	}
 
 	err = devm_spi_register_controller(&pdev->dev, ctlr);
 	if (err) {
 		dev_err(&pdev->dev, "could not register SPI controller: %d\n",
 			err);
-		goto out_clk_disable;
+		goto out_dma_release;
 	}
 
 	bcm2835_debugfs_create(bs, dev_name(&pdev->dev));
 
 	return 0;
 
+out_dma_release:
+	bcm2835_dma_release(ctlr, bs);
 out_clk_disable:
 	clk_disable_unprepare(bs->clk);
 out_controller_put:
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki