From: Chen Zhou <chenzhou10@huawei.com>
To: <jdelvare@suse.com>, <linux@roeck-us.net>
Cc: <linux-hwmon@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<chenzhou10@huawei.com>
Subject: [-next] hwmon: (w83627ehf) make sensor_dev_attr_##_name variables static
Date: Fri, 13 Dec 2019 09:56:05 +0800 [thread overview]
Message-ID: <20191213015605.172472-1-chenzhou10@huawei.com> (raw)
Fix sparse warning:
drivers/hwmon/w83627ehf.c:1202:1: warning: symbol 'sensor_dev_attr_pwm1_target' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1204:1: warning: symbol 'sensor_dev_attr_pwm2_target' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1206:1: warning: symbol 'sensor_dev_attr_pwm3_target' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1208:1: warning: symbol 'sensor_dev_attr_pwm4_target' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1211:1: warning: symbol 'sensor_dev_attr_pwm1_tolerance' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1213:1: warning: symbol 'sensor_dev_attr_pwm2_tolerance' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1215:1: warning: symbol 'sensor_dev_attr_pwm3_tolerance' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1217:1: warning: symbol 'sensor_dev_attr_pwm4_tolerance' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1294:1: warning: symbol 'sensor_dev_attr_pwm4_stop_time' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1296:1: warning: symbol 'sensor_dev_attr_pwm4_start_output' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1298:1: warning: symbol 'sensor_dev_attr_pwm4_stop_output' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1300:1: warning: symbol 'sensor_dev_attr_pwm4_max_output' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1302:1: warning: symbol 'sensor_dev_attr_pwm4_step_output' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1305:1: warning: symbol 'sensor_dev_attr_pwm3_stop_time' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1307:1: warning: symbol 'sensor_dev_attr_pwm3_start_output' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1309:1: warning: symbol 'sensor_dev_attr_pwm3_stop_output' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1312:1: warning: symbol 'sensor_dev_attr_pwm1_stop_time' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1314:1: warning: symbol 'sensor_dev_attr_pwm2_stop_time' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1316:1: warning: symbol 'sensor_dev_attr_pwm1_start_output' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1318:1: warning: symbol 'sensor_dev_attr_pwm2_start_output' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1320:1: warning: symbol 'sensor_dev_attr_pwm1_stop_output' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1322:1: warning: symbol 'sensor_dev_attr_pwm2_stop_output' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1330:1: warning: symbol 'sensor_dev_attr_pwm1_max_output' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1332:1: warning: symbol 'sensor_dev_attr_pwm1_step_output' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1334:1: warning: symbol 'sensor_dev_attr_pwm2_max_output' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1336:1: warning: symbol 'sensor_dev_attr_pwm2_step_output' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1338:1: warning: symbol 'sensor_dev_attr_pwm3_max_output' was not declared. Should it be static?
drivers/hwmon/w83627ehf.c:1340:1: warning: symbol 'sensor_dev_attr_pwm3_step_output' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
---
drivers/hwmon/w83627ehf.c | 56 +++++++++++++++++++++++------------------------
1 file changed, 28 insertions(+), 28 deletions(-)
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 207cc74..0a13f6b 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -1199,22 +1199,22 @@ store_tolerance(struct device *dev, struct device_attribute *attr,
return count;
}
-SENSOR_DEVICE_ATTR(pwm1_target, 0644, show_target_temp,
+static SENSOR_DEVICE_ATTR(pwm1_target, 0644, show_target_temp,
store_target_temp, 0);
-SENSOR_DEVICE_ATTR(pwm2_target, 0644, show_target_temp,
+static SENSOR_DEVICE_ATTR(pwm2_target, 0644, show_target_temp,
store_target_temp, 1);
-SENSOR_DEVICE_ATTR(pwm3_target, 0644, show_target_temp,
+static SENSOR_DEVICE_ATTR(pwm3_target, 0644, show_target_temp,
store_target_temp, 2);
-SENSOR_DEVICE_ATTR(pwm4_target, 0644, show_target_temp,
+static SENSOR_DEVICE_ATTR(pwm4_target, 0644, show_target_temp,
store_target_temp, 3);
-SENSOR_DEVICE_ATTR(pwm1_tolerance, 0644, show_tolerance,
+static SENSOR_DEVICE_ATTR(pwm1_tolerance, 0644, show_tolerance,
store_tolerance, 0);
-SENSOR_DEVICE_ATTR(pwm2_tolerance, 0644, show_tolerance,
+static SENSOR_DEVICE_ATTR(pwm2_tolerance, 0644, show_tolerance,
store_tolerance, 1);
-SENSOR_DEVICE_ATTR(pwm3_tolerance, 0644, show_tolerance,
+static SENSOR_DEVICE_ATTR(pwm3_tolerance, 0644, show_tolerance,
store_tolerance, 2);
-SENSOR_DEVICE_ATTR(pwm4_tolerance, 0644, show_tolerance,
+static SENSOR_DEVICE_ATTR(pwm4_tolerance, 0644, show_tolerance,
store_tolerance, 3);
/* Smart Fan registers */
@@ -1291,35 +1291,35 @@ store_##reg(struct device *dev, struct device_attribute *attr, \
fan_time_functions(fan_stop_time, FAN_STOP_TIME)
-SENSOR_DEVICE_ATTR(pwm4_stop_time, 0644, show_fan_stop_time,
+static SENSOR_DEVICE_ATTR(pwm4_stop_time, 0644, show_fan_stop_time,
store_fan_stop_time, 3);
-SENSOR_DEVICE_ATTR(pwm4_start_output, 0644, show_fan_start_output,
+static SENSOR_DEVICE_ATTR(pwm4_start_output, 0644, show_fan_start_output,
store_fan_start_output, 3);
-SENSOR_DEVICE_ATTR(pwm4_stop_output, 0644, show_fan_stop_output,
+static SENSOR_DEVICE_ATTR(pwm4_stop_output, 0644, show_fan_stop_output,
store_fan_stop_output, 3);
-SENSOR_DEVICE_ATTR(pwm4_max_output, 0644, show_fan_max_output,
+static SENSOR_DEVICE_ATTR(pwm4_max_output, 0644, show_fan_max_output,
store_fan_max_output, 3);
-SENSOR_DEVICE_ATTR(pwm4_step_output, 0644, show_fan_step_output,
+static SENSOR_DEVICE_ATTR(pwm4_step_output, 0644, show_fan_step_output,
store_fan_step_output, 3);
-SENSOR_DEVICE_ATTR(pwm3_stop_time, 0644, show_fan_stop_time,
+static SENSOR_DEVICE_ATTR(pwm3_stop_time, 0644, show_fan_stop_time,
store_fan_stop_time, 2);
-SENSOR_DEVICE_ATTR(pwm3_start_output, 0644, show_fan_start_output,
+static SENSOR_DEVICE_ATTR(pwm3_start_output, 0644, show_fan_start_output,
store_fan_start_output, 2);
-SENSOR_DEVICE_ATTR(pwm3_stop_output, 0644, show_fan_stop_output,
+static SENSOR_DEVICE_ATTR(pwm3_stop_output, 0644, show_fan_stop_output,
store_fan_stop_output, 2);
-SENSOR_DEVICE_ATTR(pwm1_stop_time, 0644, show_fan_stop_time,
+static SENSOR_DEVICE_ATTR(pwm1_stop_time, 0644, show_fan_stop_time,
store_fan_stop_time, 0);
-SENSOR_DEVICE_ATTR(pwm2_stop_time, 0644, show_fan_stop_time,
+static SENSOR_DEVICE_ATTR(pwm2_stop_time, 0644, show_fan_stop_time,
store_fan_stop_time, 1);
-SENSOR_DEVICE_ATTR(pwm1_start_output, 0644, show_fan_start_output,
+static SENSOR_DEVICE_ATTR(pwm1_start_output, 0644, show_fan_start_output,
store_fan_start_output, 0);
-SENSOR_DEVICE_ATTR(pwm2_start_output, 0644, show_fan_start_output,
+static SENSOR_DEVICE_ATTR(pwm2_start_output, 0644, show_fan_start_output,
store_fan_start_output, 1);
-SENSOR_DEVICE_ATTR(pwm1_stop_output, 0644, show_fan_stop_output,
+static SENSOR_DEVICE_ATTR(pwm1_stop_output, 0644, show_fan_stop_output,
store_fan_stop_output, 0);
-SENSOR_DEVICE_ATTR(pwm2_stop_output, 0644, show_fan_stop_output,
+static SENSOR_DEVICE_ATTR(pwm2_stop_output, 0644, show_fan_stop_output,
store_fan_stop_output, 1);
@@ -1327,17 +1327,17 @@ SENSOR_DEVICE_ATTR(pwm2_stop_output, 0644, show_fan_stop_output,
* pwm1 and pwm3 don't support max and step settings on all chips.
* Need to check support while generating/removing attribute files.
*/
-SENSOR_DEVICE_ATTR(pwm1_max_output, 0644, show_fan_max_output,
+static SENSOR_DEVICE_ATTR(pwm1_max_output, 0644, show_fan_max_output,
store_fan_max_output, 0);
-SENSOR_DEVICE_ATTR(pwm1_step_output, 0644, show_fan_step_output,
+static SENSOR_DEVICE_ATTR(pwm1_step_output, 0644, show_fan_step_output,
store_fan_step_output, 0);
-SENSOR_DEVICE_ATTR(pwm2_max_output, 0644, show_fan_max_output,
+static SENSOR_DEVICE_ATTR(pwm2_max_output, 0644, show_fan_max_output,
store_fan_max_output, 1);
-SENSOR_DEVICE_ATTR(pwm2_step_output, 0644, show_fan_step_output,
+static SENSOR_DEVICE_ATTR(pwm2_step_output, 0644, show_fan_step_output,
store_fan_step_output, 1);
-SENSOR_DEVICE_ATTR(pwm3_max_output, 0644, show_fan_max_output,
+static SENSOR_DEVICE_ATTR(pwm3_max_output, 0644, show_fan_max_output,
store_fan_max_output, 2);
-SENSOR_DEVICE_ATTR(pwm3_step_output, 0644, show_fan_step_output,
+static SENSOR_DEVICE_ATTR(pwm3_step_output, 0644, show_fan_step_output,
store_fan_step_output, 2);
static ssize_t
--
2.7.4
next reply other threads:[~2019-12-13 1:59 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-13 1:56 Chen Zhou [this message]
2019-12-13 6:06 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191213015605.172472-1-chenzhou10@huawei.com \
--to=chenzhou10@huawei.com \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®