From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: linux-rtc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
Alexandre Belloni <alexandre.belloni@bootlin.com>
Subject: [PATCH 03/16] rtc: rv3029: remove open coded regmap_update_bits
Date: Sat, 14 Dec 2019 23:10:09 +0100 [thread overview]
Message-ID: <20191214221022.622482-4-alexandre.belloni@bootlin.com> (raw)
In-Reply-To: <20191214221022.622482-1-alexandre.belloni@bootlin.com>
rv3029_update_bits open codes regmap_update_bits and forgets to properly
lock the register range while doing so. Use regmap_update_bits instead.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/rtc/rtc-rv3029c2.c | 26 ++++++--------------------
1 file changed, 6 insertions(+), 20 deletions(-)
diff --git a/drivers/rtc/rtc-rv3029c2.c b/drivers/rtc/rtc-rv3029c2.c
index aed28e29a5fd..36b4da260caf 100644
--- a/drivers/rtc/rtc-rv3029c2.c
+++ b/drivers/rtc/rtc-rv3029c2.c
@@ -137,23 +137,6 @@ static int rv3029_write_regs(struct device *dev, u8 reg, u8 const buf[],
return regmap_bulk_write(rv3029->regmap, reg, buf, len);
}
-static int rv3029_update_bits(struct device *dev, u8 reg, u8 mask, u8 set)
-{
- u8 buf;
- int ret;
-
- ret = rv3029_read_regs(dev, reg, &buf, 1);
- if (ret < 0)
- return ret;
- buf &= ~mask;
- buf |= set & mask;
- ret = rv3029_write_regs(dev, reg, &buf, 1);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
static int rv3029_get_sr(struct device *dev, u8 *buf)
{
int ret = rv3029_read_regs(dev, RV3029_STATUS, buf, 1);
@@ -200,14 +183,17 @@ static int rv3029_eeprom_busywait(struct device *dev)
static int rv3029_eeprom_exit(struct device *dev)
{
+ struct rv3029_data *rv3029 = dev_get_drvdata(dev);
+
/* Re-enable eeprom refresh */
- return rv3029_update_bits(dev, RV3029_ONOFF_CTRL,
+ return regmap_update_bits(rv3029->regmap, RV3029_ONOFF_CTRL,
RV3029_ONOFF_CTRL_EERE,
RV3029_ONOFF_CTRL_EERE);
}
static int rv3029_eeprom_enter(struct device *dev)
{
+ struct rv3029_data *rv3029 = dev_get_drvdata(dev);
int ret;
u8 sr;
@@ -236,8 +222,8 @@ static int rv3029_eeprom_enter(struct device *dev)
}
/* Disable eeprom refresh. */
- ret = rv3029_update_bits(dev, RV3029_ONOFF_CTRL, RV3029_ONOFF_CTRL_EERE,
- 0);
+ ret = regmap_update_bits(rv3029->regmap, RV3029_ONOFF_CTRL,
+ RV3029_ONOFF_CTRL_EERE, 0);
if (ret < 0)
return ret;
--
2.23.0
next prev parent reply other threads:[~2019-12-14 22:10 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-14 22:10 [PATCH 00/16] rtc: rv3029: cleanup and features Alexandre Belloni
2019-12-14 22:10 ` [PATCH 01/16] rtc: rv3029: use proper name for the driver Alexandre Belloni
2019-12-14 22:10 ` [PATCH 02/16] rtc: rv3029: let regmap validate the register ranges Alexandre Belloni
2019-12-14 22:10 ` Alexandre Belloni [this message]
2019-12-14 22:10 ` [PATCH 04/16] rtc: rv3029: remove race condition when update STATUS Alexandre Belloni
2019-12-14 22:10 ` [PATCH 05/16] rtc: rv3029: avoid reading the status register uselessly Alexandre Belloni
2019-12-14 22:10 ` [PATCH 06/16] rtc: rv3029: get rid of rv3029_get_sr Alexandre Belloni
2019-12-14 22:10 ` [PATCH 07/16] rtc: rv3029: simplify rv3029_alarm_irq_enable Alexandre Belloni
2019-12-14 22:10 ` [PATCH 08/16] rtc: rv3029: simplify rv3029_set_alarm Alexandre Belloni
2019-12-14 22:10 ` [PATCH 09/16] rtc: rv3029: drop rv3029_read_regs and rv3029_write_regs Alexandre Belloni
2019-12-14 22:10 ` [PATCH 10/16] rtc: rv3029: add RTC_VL_READ and RTC_VL_CLEAR support Alexandre Belloni
2019-12-14 22:10 ` [PATCH 11/16] rtc: rv3029: correctly handle PON and VLOW2 Alexandre Belloni
2019-12-14 22:10 ` [PATCH 12/16] rtc: rv3029: convert to devm_rtc_allocate_device Alexandre Belloni
2019-12-14 22:10 ` [PATCH 13/16] rtc: rv3029: let the core handle rtc range Alexandre Belloni
2019-12-14 22:10 ` [PATCH 14/16] rtc: rv3029: remove useless error messages Alexandre Belloni
2019-12-14 22:10 ` [PATCH 15/16] rtc: rv3029: annotate init and exit functions Alexandre Belloni
2019-12-14 22:10 ` [PATCH 16/16] rtc: rv3029: add nvram support Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191214221022.622482-4-alexandre.belloni@bootlin.com \
--to=alexandre.belloni@bootlin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®