From: Oded Gabbay <oded.gabbay@gmail.com>
To: linux-kernel@vger.kernel.org, oshpigelman@habana.ai, ttayar@habana.ai
Cc: gregkh@linuxfoundation.org
Subject: [PATCH] habanalabs: halt the engines before hard-reset
Date: Wed, 25 Dec 2019 15:19:21 +0200 [thread overview]
Message-ID: <20191225131921.15343-1-oded.gabbay@gmail.com> (raw)
The driver must halt the engines before doing hard-reset, otherwise the
device can go into undefined state. There is a place where the driver
didn't do that and this patch fixes it.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
---
drivers/misc/habanalabs/device.c | 1 +
drivers/misc/habanalabs/goya/goya.c | 42 +++++++++++++++++++++++++++++
2 files changed, 43 insertions(+)
diff --git a/drivers/misc/habanalabs/device.c b/drivers/misc/habanalabs/device.c
index b155e9549076..166883b64725 100644
--- a/drivers/misc/habanalabs/device.c
+++ b/drivers/misc/habanalabs/device.c
@@ -1189,6 +1189,7 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
if (hdev->asic_funcs->get_hw_state(hdev) == HL_DEVICE_HW_STATE_DIRTY) {
dev_info(hdev->dev,
"H/W state is dirty, must reset before initializing\n");
+ hdev->asic_funcs->halt_engines(hdev, true);
hdev->asic_funcs->hw_fini(hdev, true);
}
diff --git a/drivers/misc/habanalabs/goya/goya.c b/drivers/misc/habanalabs/goya/goya.c
index 72935851a7e8..5750294400f4 100644
--- a/drivers/misc/habanalabs/goya/goya.c
+++ b/drivers/misc/habanalabs/goya/goya.c
@@ -895,6 +895,11 @@ void goya_init_dma_qmans(struct hl_device *hdev)
*/
static void goya_disable_external_queues(struct hl_device *hdev)
{
+ struct goya_device *goya = hdev->asic_specific;
+
+ if (!(goya->hw_cap_initialized & HW_CAP_DMA))
+ return;
+
WREG32(mmDMA_QM_0_GLBL_CFG0, 0);
WREG32(mmDMA_QM_1_GLBL_CFG0, 0);
WREG32(mmDMA_QM_2_GLBL_CFG0, 0);
@@ -956,6 +961,11 @@ static int goya_stop_external_queues(struct hl_device *hdev)
{
int rc, retval = 0;
+ struct goya_device *goya = hdev->asic_specific;
+
+ if (!(goya->hw_cap_initialized & HW_CAP_DMA))
+ return retval;
+
rc = goya_stop_queue(hdev,
mmDMA_QM_0_GLBL_CFG1,
mmDMA_QM_0_CP_STS,
@@ -1744,9 +1754,18 @@ void goya_init_tpc_qmans(struct hl_device *hdev)
*/
static void goya_disable_internal_queues(struct hl_device *hdev)
{
+ struct goya_device *goya = hdev->asic_specific;
+
+ if (!(goya->hw_cap_initialized & HW_CAP_MME))
+ goto disable_tpc;
+
WREG32(mmMME_QM_GLBL_CFG0, 0);
WREG32(mmMME_CMDQ_GLBL_CFG0, 0);
+disable_tpc:
+ if (!(goya->hw_cap_initialized & HW_CAP_TPC))
+ return;
+
WREG32(mmTPC0_QM_GLBL_CFG0, 0);
WREG32(mmTPC0_CMDQ_GLBL_CFG0, 0);
@@ -1782,8 +1801,12 @@ static void goya_disable_internal_queues(struct hl_device *hdev)
*/
static int goya_stop_internal_queues(struct hl_device *hdev)
{
+ struct goya_device *goya = hdev->asic_specific;
int rc, retval = 0;
+ if (!(goya->hw_cap_initialized & HW_CAP_MME))
+ goto stop_tpc;
+
/*
* Each queue (QMAN) is a separate H/W logic. That means that each
* QMAN can be stopped independently and failure to stop one does NOT
@@ -1810,6 +1833,10 @@ static int goya_stop_internal_queues(struct hl_device *hdev)
retval = -EIO;
}
+stop_tpc:
+ if (!(goya->hw_cap_initialized & HW_CAP_TPC))
+ return retval;
+
rc = goya_stop_queue(hdev,
mmTPC0_QM_GLBL_CFG1,
mmTPC0_QM_CP_STS,
@@ -1975,6 +2002,11 @@ static int goya_stop_internal_queues(struct hl_device *hdev)
static void goya_dma_stall(struct hl_device *hdev)
{
+ struct goya_device *goya = hdev->asic_specific;
+
+ if (!(goya->hw_cap_initialized & HW_CAP_DMA))
+ return;
+
WREG32(mmDMA_QM_0_GLBL_CFG1, 1 << DMA_QM_0_GLBL_CFG1_DMA_STOP_SHIFT);
WREG32(mmDMA_QM_1_GLBL_CFG1, 1 << DMA_QM_1_GLBL_CFG1_DMA_STOP_SHIFT);
WREG32(mmDMA_QM_2_GLBL_CFG1, 1 << DMA_QM_2_GLBL_CFG1_DMA_STOP_SHIFT);
@@ -1984,6 +2016,11 @@ static void goya_dma_stall(struct hl_device *hdev)
static void goya_tpc_stall(struct hl_device *hdev)
{
+ struct goya_device *goya = hdev->asic_specific;
+
+ if (!(goya->hw_cap_initialized & HW_CAP_TPC))
+ return;
+
WREG32(mmTPC0_CFG_TPC_STALL, 1 << TPC0_CFG_TPC_STALL_V_SHIFT);
WREG32(mmTPC1_CFG_TPC_STALL, 1 << TPC1_CFG_TPC_STALL_V_SHIFT);
WREG32(mmTPC2_CFG_TPC_STALL, 1 << TPC2_CFG_TPC_STALL_V_SHIFT);
@@ -1996,6 +2033,11 @@ static void goya_tpc_stall(struct hl_device *hdev)
static void goya_mme_stall(struct hl_device *hdev)
{
+ struct goya_device *goya = hdev->asic_specific;
+
+ if (!(goya->hw_cap_initialized & HW_CAP_MME))
+ return;
+
WREG32(mmMME_STALL, 0xFFFFFFFF);
}
--
2.17.1
next reply other threads:[~2019-12-25 13:19 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-25 13:19 Oded Gabbay [this message]
2019-12-26 7:27 ` Tomer Tayar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191225131921.15343-1-oded.gabbay@gmail.com \
--to=oded.gabbay@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=oshpigelman@habana.ai \
--cc=ttayar@habana.ai \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®