mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Russell King <linux@armlinux.org.uk>,
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH net-next] net: phy: Added IRQ print to phylink_bringup_phy()
Date: Sun, 12 Jan 2020 09:35:38 -0800	[thread overview]
Message-ID: <20200112173539.18503-1-f.fainelli@gmail.com> (raw)

The information about the PHY attached to the PHYLINK instance is useful
but is missing the IRQ prints that phy_attached_info() adds.
phy_attached_info() is a bit long and it would not be possible to use
phylink_info() anyway.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/phy/phy_device.c | 12 ++++++++++--
 drivers/net/phy/phylink.c    |  7 +++++--
 include/linux/phy.h          |  2 ++
 3 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index e5dc9f87f495..6a5056e0ae77 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1107,9 +1107,8 @@ void phy_attached_info(struct phy_device *phydev)
 EXPORT_SYMBOL(phy_attached_info);
 
 #define ATTACHED_FMT "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%s)"
-void phy_attached_print(struct phy_device *phydev, const char *fmt, ...)
+char *phy_attached_info_irq(struct phy_device *phydev)
 {
-	const char *drv_name = phydev->drv ? phydev->drv->name : "unbound";
 	char *irq_str;
 	char irq_num[8];
 
@@ -1126,6 +1125,14 @@ void phy_attached_print(struct phy_device *phydev, const char *fmt, ...)
 		break;
 	}
 
+	return kasprintf(GFP_KERNEL, "%s", irq_str);
+}
+EXPORT_SYMBOL(phy_attached_info_irq);
+
+void phy_attached_print(struct phy_device *phydev, const char *fmt, ...)
+{
+	const char *drv_name = phydev->drv ? phydev->drv->name : "unbound";
+	char *irq_str = phy_attached_info_irq(phydev);
 
 	if (!fmt) {
 		phydev_info(phydev, ATTACHED_FMT "\n",
@@ -1142,6 +1149,7 @@ void phy_attached_print(struct phy_device *phydev, const char *fmt, ...)
 		vprintk(fmt, ap);
 		va_end(ap);
 	}
+	kfree(irq_str);
 }
 EXPORT_SYMBOL(phy_attached_print);
 
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 8d786c99f97a..efabbfa4a6d3 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -726,6 +726,7 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy,
 {
 	struct phylink_link_state config;
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
+	char *irq_str;
 	int ret;
 
 	/*
@@ -761,9 +762,11 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy,
 	phy->phylink = pl;
 	phy->phy_link_change = phylink_phy_change;
 
+	irq_str = phy_attached_info_irq(phy);
 	phylink_info(pl,
-		     "PHY [%s] driver [%s]\n", dev_name(&phy->mdio.dev),
-		     phy->drv->name);
+		     "PHY [%s] driver [%s] (irq=%s)\n",
+		     dev_name(&phy->mdio.dev), phy->drv->name, irq_str);
+	kfree(irq_str);
 
 	mutex_lock(&phy->lock);
 	mutex_lock(&pl->state_mutex);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 5932bb8e9c35..3a70b756ac1a 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1131,6 +1131,8 @@ static inline void phy_unlock_mdio_bus(struct phy_device *phydev)
 
 void phy_attached_print(struct phy_device *phydev, const char *fmt, ...)
 	__printf(2, 3);
+char *phy_attached_info_irq(struct phy_device *phydev)
+	__malloc;
 void phy_attached_info(struct phy_device *phydev);
 
 /* Clause 22 PHY */
-- 
2.19.1


             reply	other threads:[~2020-01-12 17:35 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-12 17:35 Florian Fainelli [this message]
2020-01-14 18:57 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200112173539.18503-1-f.fainelli@gmail.com \
    --to=f.fainelli@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=hkallweit1@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®