From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <airlied@linux.ie>, <daniel@ffwll.ch>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>, <a.hajda@samsung.com>,
<narmstrong@baylibre.com>
Cc: <tomi.valkeinen@ti.com>, <dri-devel@lists.freedesktop.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<Laurent.pinchart@ideasonboard.com>, <jonas@kwiboo.se>,
<jernej.skrabec@siol.net>
Subject: [PATCH v3 1/2] dt-bindings: display: bridge: Add documentation for Toshiba tc358768
Date: Mon, 27 Jan 2020 12:56:33 +0200 [thread overview]
Message-ID: <20200127105634.7638-2-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <20200127105634.7638-1-peter.ujfalusi@ti.com>
TC358768/TC358778 is a Parallel RGB to MIPI DSI bridge.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
.../display/bridge/toshiba,tc358768.yaml | 158 ++++++++++++++++++
1 file changed, 158 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
new file mode 100644
index 000000000000..8dd8cca39a77
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358768.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toschiba TC358768/TC358778 Parallel RGB to MIPI DSI bridge
+
+maintainers:
+ - Peter Ujfalusi <peter.ujfalusi@ti.com>
+
+description: |
+ The TC358768/TC358778 is bridge device which converts RGB to DSI.
+
+properties:
+ compatible:
+ enum:
+ - toshiba,tc358768
+ - toshiba,tc358778
+
+ reg:
+ maxItems: 1
+ description: base I2C address of the device
+
+ reset-gpios:
+ maxItems: 1
+ description: GPIO connected to active low RESX pin
+
+ vddc-supply:
+ description: Regulator for 1.2V internal core power.
+
+ vddmipi-supply:
+ description: Regulator for 1.2V for the MIPI.
+
+ vddio-supply:
+ description: Regulator for 1.8V - 3.3V IO power.
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: refclk
+
+ ports:
+ type: object
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ port@0:
+ type: object
+ additionalProperties: false
+
+ description: |
+ Video port for RGB input
+
+ properties:
+ reg:
+ const: 0
+
+ patternProperties:
+ endpoint:
+ type: object
+ additionalProperties: false
+
+ properties:
+ data-lines:
+ enum: [ 16, 18, 24 ]
+
+ remote-endpoint: true
+
+ required:
+ - reg
+
+ port@1:
+ type: object
+ additionalProperties: false
+
+ description: |
+ Video port for DSI output (panel or connector).
+
+ properties:
+ reg:
+ const: 1
+
+ patternProperties:
+ endpoint:
+ type: object
+ additionalProperties: false
+
+ properties:
+ remote-endpoint: true
+
+ required:
+ - reg
+
+ required:
+ - "#address-cells"
+ - "#size-cells"
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - vddc-supply
+ - vddmipi-supply
+ - vddio-supply
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dsi_bridge: tc358768@0e {
+ compatible = "toshiba,tc358768";
+ reg = <0x0e>;
+
+ clocks = <&tc358768_refclk>;
+ clock-names = "refclk";
+
+ /* GPIO line is inverted before going to the bridge */
+ reset-gpios = <&pcf_display_board 0 1 /* GPIO_ACTIVE_LOW */>;
+
+ vddc-supply = <&v1_2d>;
+ vddmipi-supply = <&v1_2d>;
+ vddio-supply = <&v3_3d>;
+
+ dsi_bridge_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ rgb_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ data-lines = <24>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ };
+ };
+ };
+ };
+ };
+
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
next prev parent reply other threads:[~2020-01-27 10:56 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-27 10:56 [PATCH v3 0/2] drm/bridge: Support for Toshiba tc358768 RGB to DSI bridge Peter Ujfalusi
2020-01-27 10:56 ` Peter Ujfalusi [this message]
2020-01-27 18:49 ` [PATCH v3 1/2] dt-bindings: display: bridge: Add documentation for Toshiba tc358768 Rob Herring
2020-01-28 10:14 ` Peter Ujfalusi
2020-01-27 10:56 ` [PATCH v3 2/2] drm/bridge: Add tc358768 driver Peter Ujfalusi
2020-01-27 11:59 ` Peter Ujfalusi
2020-01-30 8:20 ` Andrzej Hajda
2020-01-31 10:35 ` Peter Ujfalusi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200127105634.7638-2-peter.ujfalusi@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=a.hajda@samsung.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jernej.skrabec@siol.net \
--cc=jonas@kwiboo.se \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®