From: "Paul E. McKenney" <paulmck@kernel.org>
To: Marco Elver <elver@google.com>
Cc: andreyknvl@google.com, glider@google.com, dvyukov@google.com,
kasan-dev@googlegroups.com, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/3] kcsan: Introduce ASSERT_EXCLUSIVE_* macros
Date: Wed, 5 Feb 2020 13:33:02 -0800 [thread overview]
Message-ID: <20200205213302.GA2935@paulmck-ThinkPad-P72> (raw)
In-Reply-To: <20200205204333.30953-2-elver@google.com>
On Wed, Feb 05, 2020 at 09:43:32PM +0100, Marco Elver wrote:
> Introduces ASSERT_EXCLUSIVE_WRITER and ASSERT_EXCLUSIVE_ACCESS, which
> may be used to assert properties of synchronization logic, where
> violation cannot be detected as a normal data race.
>
> Examples of the reports that may be generated:
>
> ==================================================================
> BUG: KCSAN: data-race in test_thread / test_thread
>
> write to 0xffffffffab3d1540 of 8 bytes by task 466 on cpu 2:
> test_thread+0x8d/0x111
> debugfs_write.cold+0x32/0x44
> ...
>
> assert no writes to 0xffffffffab3d1540 of 8 bytes by task 464 on cpu 0:
> test_thread+0xa3/0x111
> debugfs_write.cold+0x32/0x44
> ...
> ==================================================================
>
> ==================================================================
> BUG: KCSAN: data-race in test_thread / test_thread
>
> assert no accesses to 0xffffffffab3d1540 of 8 bytes by task 465 on cpu 1:
> test_thread+0xb9/0x111
> debugfs_write.cold+0x32/0x44
> ...
>
> read to 0xffffffffab3d1540 of 8 bytes by task 464 on cpu 0:
> test_thread+0x77/0x111
> debugfs_write.cold+0x32/0x44
> ...
> ==================================================================
>
> Signed-off-by: Marco Elver <elver@google.com>
> Suggested-by: Paul E. McKenney <paulmck@kernel.org>
> ---
>
> Please let me know if the names make sense, given they do not include a
> KCSAN_ prefix.
I am OK with this, but there might well be some bikeshedding later on.
Which should not be a real problem, irritating though it might be.
> The names are unique across the kernel. I wouldn't expect another macro
> with the same name but different semantics to pop up any time soon. If
> there is a dual use to these macros (e.g. another tool that could hook
> into it), we could also move it elsewhere (include/linux/compiler.h?).
>
> We can also revisit the original suggestion of WRITE_ONCE_EXCLUSIVE(),
> if it is something that'd be used very widely. It'd be straightforward
> to add with the help of these macros, but would need to be added to
> include/linux/compiler.h.
A more definite use case for ASSERT_EXCLUSIVE_ACCESS() is a
reference-counting algorithm where exclusive access is expected after
a successful atomic_dec_and_test(). Any objection to making the
docbook header use that example? I believe that a more familiar
example would help people see the point of all this. ;-)
I am queueing these as-is for review and testing, but please feel free
to send updated versions. Easy to do the replacement!
And you knew that this was coming... It looks to me that I can
do something like this:
struct foo {
int a;
char b;
long c;
atomic_t refctr;
};
void do_a_foo(struct foo *fp)
{
if (atomic_dec_and_test(&fp->refctr)) {
ASSERT_EXCLUSIVE_ACCESS(*fp);
safely_dispose_of(fp);
}
}
Does that work, or is it necessary to assert for each field separately?
Thanx, Paul
> ---
> include/linux/kcsan-checks.h | 34 ++++++++++++++++++++++++++++++++++
> 1 file changed, 34 insertions(+)
>
> diff --git a/include/linux/kcsan-checks.h b/include/linux/kcsan-checks.h
> index 21b1d1f214ad5..1a7b51e516335 100644
> --- a/include/linux/kcsan-checks.h
> +++ b/include/linux/kcsan-checks.h
> @@ -96,4 +96,38 @@ static inline void kcsan_check_access(const volatile void *ptr, size_t size,
> kcsan_check_access(ptr, size, KCSAN_ACCESS_ATOMIC | KCSAN_ACCESS_WRITE)
> #endif
>
> +/**
> + * ASSERT_EXCLUSIVE_WRITER - assert no other threads are writing @var
> + *
> + * Assert that there are no other threads writing @var; other readers are
> + * allowed. This assertion can be used to specify properties of synchronization
> + * logic, where violation cannot be detected as a normal data race.
> + *
> + * For example, if a per-CPU variable is only meant to be written by a single
> + * CPU, but may be read from other CPUs; in this case, reads and writes must be
> + * marked properly, however, if an off-CPU WRITE_ONCE() races with the owning
> + * CPU's WRITE_ONCE(), would not constitute a data race but could be a harmful
> + * race condition. Using this macro allows specifying this property in the code
> + * and catch such bugs.
> + *
> + * @var variable to assert on
> + */
> +#define ASSERT_EXCLUSIVE_WRITER(var) \
> + __kcsan_check_access(&(var), sizeof(var), KCSAN_ACCESS_ASSERT)
> +
> +/**
> + * ASSERT_EXCLUSIVE_ACCESS - assert no other threads are accessing @var
> + *
> + * Assert that no other thread is accessing @var (no readers nor writers). This
> + * assertion can be used to specify properties of synchronization logic, where
> + * violation cannot be detected as a normal data race.
> + *
> + * For example, if a variable is not read nor written by the current thread, nor
> + * should it be touched by any other threads during the current execution phase.
> + *
> + * @var variable to assert on
> + */
> +#define ASSERT_EXCLUSIVE_ACCESS(var) \
> + __kcsan_check_access(&(var), sizeof(var), KCSAN_ACCESS_WRITE | KCSAN_ACCESS_ASSERT)
> +
> #endif /* _LINUX_KCSAN_CHECKS_H */
> --
> 2.25.0.341.g760bfbb309-goog
>
next prev parent reply other threads:[~2020-02-05 21:33 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-05 20:43 [PATCH 1/3] kcsan: Introduce KCSAN_ACCESS_ASSERT access type Marco Elver
2020-02-05 20:43 ` [PATCH 2/3] kcsan: Introduce ASSERT_EXCLUSIVE_* macros Marco Elver
2020-02-05 21:33 ` Paul E. McKenney [this message]
2020-02-05 21:48 ` Marco Elver
2020-02-05 22:04 ` Paul E. McKenney
2020-02-06 15:55 ` Marco Elver
2020-02-05 20:43 ` [PATCH 3/3] kcsan: Add test to generate conflicts via debugfs Marco Elver
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200205213302.GA2935@paulmck-ThinkPad-P72 \
--to=paulmck@kernel.org \
--cc=andreyknvl@google.com \
--cc=dvyukov@google.com \
--cc=elver@google.com \
--cc=glider@google.com \
--cc=kasan-dev@googlegroups.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®