From: Xiaoyao Li <xiaoyao.li@intel.com>
To: Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
hpa@zytor.com, Paolo Bonzini <pbonzini@redhat.com>,
Sean Christopherson <sean.j.christopherson@intel.com>,
Andy Lutomirski <luto@kernel.org>,
tony.luck@intel.com
Cc: peterz@infradead.org, fenghua.yu@intel.com, x86@kernel.org,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Xiaoyao Li <xiaoyao.li@intel.com>
Subject: [PATCH v3 2/8] x86/split_lock: Ensure X86_FEATURE_SPLIT_LOCK_DETECT means the existence of feature
Date: Thu, 6 Feb 2020 15:04:06 +0800 [thread overview]
Message-ID: <20200206070412.17400-3-xiaoyao.li@intel.com> (raw)
In-Reply-To: <20200206070412.17400-1-xiaoyao.li@intel.com>
When flag X86_FEATURE_SPLIT_LOCK_DETECT is set, it should ensure the
existence of MSR_TEST_CTRL and MSR_TEST_CTRL.SPLIT_LOCK_DETECT bit.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
---
arch/x86/kernel/cpu/intel.c | 41 +++++++++++++++++++++----------------
1 file changed, 23 insertions(+), 18 deletions(-)
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 2b3874a96bd4..49535ed81c22 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -702,7 +702,8 @@ static void init_intel(struct cpuinfo_x86 *c)
if (tsx_ctrl_state == TSX_CTRL_DISABLE)
tsx_disable();
- split_lock_init();
+ if (boot_cpu_has(X86_FEATURE_SPLIT_LOCK_DETECT))
+ split_lock_init();
}
#ifdef CONFIG_X86_32
@@ -986,9 +987,26 @@ static inline bool match_option(const char *arg, int arglen, const char *opt)
static void __init split_lock_setup(void)
{
+ u64 test_ctrl_val;
char arg[20];
int i, ret;
+ /*
+ * Use the "safe" versions of rdmsr/wrmsr here to ensure MSR_TEST_CTRL
+ * and MSR_TEST_CTRL.SPLIT_LOCK_DETECT bit do exist. Because there may
+ * be glitches in virtualization that leave a guest with an incorrect
+ * view of real h/w capabilities.
+ */
+ if (rdmsrl_safe(MSR_TEST_CTRL, &test_ctrl_val))
+ return;
+
+ if (wrmsrl_safe(MSR_TEST_CTRL,
+ test_ctrl_val | MSR_TEST_CTRL_SPLIT_LOCK_DETECT))
+ return;
+
+ if (wrmsrl_safe(MSR_TEST_CTRL, test_ctrl_val))
+ return;
+
setup_force_cpu_cap(X86_FEATURE_SPLIT_LOCK_DETECT);
sld_state = sld_warn;
@@ -1022,24 +1040,19 @@ static void __init split_lock_setup(void)
* Locking is not required at the moment because only bit 29 of this
* MSR is implemented and locking would not prevent that the operation
* of one thread is immediately undone by the sibling thread.
- * Use the "safe" versions of rdmsr/wrmsr here because although code
- * checks CPUID and MSR bits to make sure the TEST_CTRL MSR should
- * exist, there may be glitches in virtualization that leave a guest
- * with an incorrect view of real h/w capabilities.
*/
-static bool __sld_msr_set(bool on)
+static void __sld_msr_set(bool on)
{
u64 test_ctrl_val;
- if (rdmsrl_safe(MSR_TEST_CTRL, &test_ctrl_val))
- return false;
+ rdmsrl(MSR_TEST_CTRL, test_ctrl_val);
if (on)
test_ctrl_val |= MSR_TEST_CTRL_SPLIT_LOCK_DETECT;
else
test_ctrl_val &= ~MSR_TEST_CTRL_SPLIT_LOCK_DETECT;
- return !wrmsrl_safe(MSR_TEST_CTRL, test_ctrl_val);
+ wrmsrl(MSR_TEST_CTRL, test_ctrl_val);
}
static void split_lock_init(void)
@@ -1047,15 +1060,7 @@ static void split_lock_init(void)
if (sld_state == sld_off)
return;
- if (__sld_msr_set(true))
- return;
-
- /*
- * If this is anything other than the boot-cpu, you've done
- * funny things and you get to keep whatever pieces.
- */
- pr_warn("MSR fail -- disabled\n");
- sld_state = sld_off;
+ __sld_msr_set(true);
}
bool handle_user_split_lock(unsigned long ip)
--
2.23.0
next prev parent reply other threads:[~2020-02-06 7:09 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-06 7:04 [PATCH v3 0/8] kvm/split_lock: Add feature split lock detection support in kvm Xiaoyao Li
2020-02-06 7:04 ` [PATCH v3 1/8] x86/split_lock: Export handle_user_split_lock() Xiaoyao Li
2020-03-03 18:42 ` Sean Christopherson
2020-02-06 7:04 ` Xiaoyao Li [this message]
2020-03-03 18:55 ` [PATCH v3 2/8] x86/split_lock: Ensure X86_FEATURE_SPLIT_LOCK_DETECT means the existence of feature Sean Christopherson
2020-03-03 19:41 ` Sean Christopherson
2020-03-04 1:49 ` Xiaoyao Li
2020-03-05 16:23 ` Sean Christopherson
2020-03-06 2:15 ` Xiaoyao Li
2020-03-04 2:20 ` Xiaoyao Li
2020-02-06 7:04 ` [PATCH v3 3/8] x86/split_lock: Cache the value of MSR_TEST_CTRL in percpu data Xiaoyao Li
2020-02-06 20:23 ` Arvind Sankar
2020-02-07 4:18 ` Xiaoyao Li
2020-03-03 19:18 ` Sean Christopherson
2020-03-05 6:48 ` Xiaoyao Li
2020-02-06 7:04 ` [PATCH v3 4/8] x86/split_lock: Add and export split_lock_detect_enabled() and split_lock_detect_fatal() Xiaoyao Li
2020-03-03 18:59 ` Sean Christopherson
2020-02-06 7:04 ` [PATCH v3 5/8] kvm: x86: Emulate split-lock access as a write Xiaoyao Li
2020-02-06 7:04 ` [PATCH v3 6/8] kvm: vmx: Extend VMX's #AC interceptor to handle split lock #AC happens in guest Xiaoyao Li
2020-03-03 19:08 ` Sean Christopherson
2020-02-06 7:04 ` [PATCH v3 7/8] kvm: x86: Emulate MSR IA32_CORE_CAPABILITIES Xiaoyao Li
2020-02-06 7:04 ` [PATCH v3 8/8] x86: vmx: virtualize split lock detection Xiaoyao Li
2020-02-07 18:27 ` Arvind Sankar
2020-02-08 4:51 ` Xiaoyao Li
2020-03-03 19:30 ` Sean Christopherson
2020-03-05 14:16 ` Xiaoyao Li
2020-03-05 16:49 ` Sean Christopherson
2020-03-06 0:29 ` Xiaoyao Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200206070412.17400-3-xiaoyao.li@intel.com \
--to=xiaoyao.li@intel.com \
--cc=bp@alien8.de \
--cc=fenghua.yu@intel.com \
--cc=hpa@zytor.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@kernel.org \
--cc=mingo@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peterz@infradead.org \
--cc=sean.j.christopherson@intel.com \
--cc=tglx@linutronix.de \
--cc=tony.luck@intel.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®