mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jerry Snitselaar <jsnitsel@redhat.com>
To: iommu@lists.linux-foundation.org, linux-kernel@vger.kernel.org,
	Lu Baolu <baolu.lu@linux.intel.com>
Subject: Re: warning from domain_get_iommu
Date: Thu, 6 Feb 2020 10:43:58 -0700	[thread overview]
Message-ID: <20200206174358.shzhieijle5wdshr@cantor> (raw)
In-Reply-To: <20200204200714.u4ezhi6vhqhxog6e@cantor>

On Tue Feb 04 20, Jerry Snitselaar wrote:
>I'm working on getting a system to reproduce this, and verify it also occurs
>with 5.5, but I have a report of a case where the kdump kernel gives
>warnings like the following on a hp dl360 gen9:
>
>[    2.830589] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    2.832615] ehci-pci: EHCI PCI platform driver
>[    2.834190] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    2.835974] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    2.838276] ehci-pci 0000:00:1a.0: debug port 2
>[    2.839700] WARNING: CPU: 0 PID: 1 at drivers/iommu/intel-iommu.c:598 domain_get_iommu+0x55/0x60
>[    2.840671] Modules linked in:
>[    2.840671] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-170.el8.kdump2.x86_64 #1
>[    2.840671] Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 07/21/2019
>[    2.840671] RIP: 0010:domain_get_iommu+0x55/0x60
>[    2.840671] Code: c2 01 eb 0b 48 83 c0 01 8b 34 87 85 f6 75 0b 48 63 c8 48 39 c2 75 ed 31 c0 c3 48 c1 e1 03 48 8b 05 70 f3 91 01 48 8b 04 08 c3 <0f> 0b 31 c0 c3 31 c9 eb eb 66 90 0f 1f 44 00 00 41 55 40 0f b6 f6
>[    2.840671] RSP: 0018:ffffc900000dfab8 EFLAGS: 00010202
>[    2.840671] RAX: ffff88ec7f1c8000 RBX: 0000006c7c867000 RCX: 0000000000000000
>[    2.840671] RDX: 00000000fffffff0 RSI: 0000000000000000 RDI: ffff88ec7f1c8000
>[    2.840671] RBP: ffff88ec6f7000b0 R08: ffff88ec7f19d000 R09: ffff88ec7cbfcd00
>[    2.840671] R10: 0000000000000095 R11: ffffc900000df928 R12: 0000000000000000
>[    2.840671] R13: ffff88ec7f1c8000 R14: 0000000000001000 R15: 00000000ffffffff
>[    2.840671] FS:  0000000000000000(0000) GS:ffff88ec7f600000(0000) knlGS:0000000000000000
>[    2.840671] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>[    2.840671] CR2: 00007ff3e1713000 CR3: 0000006c7de0a004 CR4: 00000000001606b0
>[    2.840671] Call Trace:
>[    2.840671]  __intel_map_single+0x62/0x140
>[    2.840671]  intel_alloc_coherent+0xa6/0x130
>[    2.840671]  dma_pool_alloc+0xd8/0x1e0
>[    2.840671]  e_qh_alloc+0x55/0x130
>[    2.840671]  ehci_setup+0x284/0x7b0
>[    2.840671]  ehci_pci_setup+0xa3/0x530
>[    2.840671]  usb_add_hcd+0x2b6/0x800
>[    2.840671]  usb_hcd_pci_probe+0x375/0x460
>[    2.840671]  local_pci_probe+0x41/0x90
>[    2.840671]  pci_device_probe+0x105/0x1b0
>[    2.840671]  driver_probe_device+0x12d/0x460
>[    2.840671]  device_driver_attach+0x50/0x60
>[    2.840671]  __driver_attach+0x61/0x130
>[    2.840671]  ? device_driver_attach+0x60/0x60
>[    2.840671]  bus_for_each_dev+0x77/0xc0
>[    2.840671]  ? klist_add_tail+0x3b/0x70
>[    2.840671]  bus_add_driver+0x14d/0x1e0
>[    2.840671]  ? ehci_hcd_init+0xaa/0xaa
>[    2.840671]  ? do_early_param+0x91/0x91
>[    2.840671]  driver_register+0x6b/0xb0
>[    2.840671]  ? ehci_hcd_init+0xaa/0xaa
>[    2.840671]  do_one_initcall+0x46/0x1c3
>[    2.840671]  ? do_early_param+0x91/0x91
>[    2.840671]  kernel_init_freeable+0x1af/0x258
>[    2.840671]  ? rest_init+0xaa/0xaa
>[    2.840671]  kernel_init+0xa/0xf9
>[    2.840671]  ret_from_fork+0x35/0x40
>[    2.840671] ---[ end trace e87b0d9a1c8135c4 ]---
>[    3.010848] ehci-pci 0000:00:1a.0: Using iommu dma mapping
>[    3.012551] ehci-pci 0000:00:1a.0: 32bit DMA uses non-identity mapping
>[    3.018537] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    3.021188] ehci-pci 0000:00:1a.0: irq 18, io mem 0x93002000
>[    3.029006] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    3.030918] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
>[    3.033491] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.035900] usb usb1: Product: EHCI Host Controller
>[    3.037423] usb usb1: Manufacturer: Linux 4.18.0-170.el8.kdump2.x86_64 ehci_hcd
>[    3.039691] usb usb1: SerialNumber: 0000:00:1a.0
>
>It looks like the device finishes initializing once it figures out it
>needs dma mapping instead of the default
>passthrough. intel_alloc_coherent calls iommu_need_mapping, before it
>calls __intel_map_single, so I'm not sure why it is tripping over the
>WARN_ON in domain_get_iommu.
>
>one thing I noticed while looking at this is that domain_get_iommu can
>return NULL. So should there be something like the following in
>__intel_map_single after the domain_get_iommu call?
>
>if (!iommu)
>   goto error;
>
>It is possible to deref the null pointer later otherwise.
>
>Regards,
>Jerry

I reproduced the warning with a 5.5 kernel on an Intel NUC5i5MYBE.


  reply	other threads:[~2020-02-06 17:44 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-04 20:07 Jerry Snitselaar
2020-02-06 17:43 ` Jerry Snitselaar [this message]
2020-02-07  9:34   ` Jerry Snitselaar
2020-02-08  6:53     ` Lu Baolu
2020-02-08 10:19       ` Jerry Snitselaar
2020-02-09  5:54         ` Lu Baolu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200206174358.shzhieijle5wdshr@cantor \
    --to=jsnitsel@redhat.com \
    --cc=baolu.lu@linux.intel.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®