From: Stephan Gerhold <stephan@gerhold.net>
To: Sameer Pujar <spujar@nvidia.com>
Cc: tiwai@suse.com, perex@perex.cz, alsa-devel@alsa-project.org,
broonie@kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [alsa-devel] [RFC] ASoC: soc-pcm: crash in snd_soc_dapm_new_dai
Date: Mon, 17 Feb 2020 15:41:20 +0100 [thread overview]
Message-ID: <20200217144120.GA243254@gerhold.net> (raw)
In-Reply-To: <1579443563-12287-1-git-send-email-spujar@nvidia.com>
On Sun, Jan 19, 2020 at 07:49:23PM +0530, Sameer Pujar wrote:
> Crash happens in snd_soc_dapm_new_dai() when substream->private_data
> access is made and substream is NULL here. This is seen for DAIs where
> only playback or capture stream is defined. This seems to be happening
> for codec2codec DAI link.
>
> Both playback and capture are 0 during soc_new_pcm(). This is probably
> happening because cpu_dai and codec_dai are both validated either for
> SNDRV_PCM_STREAM_PLAYBACK or SNDRV_PCM_STREAM_CAPTURE.
>
> Shouldn't be playback = 1 when,
> - playback stream is available for codec_dai AND
> - capture stream is available for cpu_dai
>
> and vice-versa for capture = 1?
>
> Signed-off-by: Sameer Pujar <spujar@nvidia.com>
> ---
> sound/soc/soc-pcm.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
> index 74d340d..5aa9c0b 100644
> --- a/sound/soc/soc-pcm.c
> +++ b/sound/soc/soc-pcm.c
> @@ -2855,10 +2855,10 @@ int soc_new_pcm(struct snd_soc_pcm_runtime *rtd, int num)
>
> for_each_rtd_codec_dai(rtd, i, codec_dai) {
> if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_PLAYBACK) &&
> - snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_PLAYBACK))
> + snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_CAPTURE))
> playback = 1;
> if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_CAPTURE) &&
> - snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_CAPTURE))
> + snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_PLAYBACK))
> capture = 1;
> }
>
There are no longer any playback/capture PCMs registered on
qcom/apq8016_sbc with this patch. :(
With this patch:
$ ls /dev/snd
controlC0 timer
Without this patch:
$ ls /dev/snd
controlC0 pcmC0D0p pcmC0D1c timer
(There is exactly one playback-only and capture-only PCM normally...)
The routing looks like this:
qcom-apq8016-sbc 7702000.sound: ASoC: registered pcm #0 WCD multicodec-0
qcom-apq8016-sbc 7702000.sound: multicodec <-> Primary MI2S mapping ok
qcom-apq8016-sbc 7702000.sound: ASoC: registered pcm #1 WCD-Capture multicodec-1
qcom-apq8016-sbc 7702000.sound: multicodec <-> Tertiary MI2S mapping ok
WCD: connected DAI link 7708000.lpass:Primary Playback -> 771c000.codec:AIF1 Playback
WCD: connected DAI link 7708000.lpass:Primary Playback -> 200f000.spmi:pm8916@1:codec@f00:PDM Playback
WCD-Capture: connected DAI link 771c000.codec:AIF1 Capture -> 7708000.lpass:Tertiary Capture
WCD-Capture: connected DAI link 200f000.spmi:pm8916@1:codec@f00:PDM Capture -> 7708000.lpass:Tertiary Capture
For the playback stream, codec_dai and cpu_dai (lpass) only support SNDRV_PCM_STREAM_PLAYBACK.
The same applies to the capture stream.
I'm a bit confused about this patch, isn't SNDRV_PCM_STREAM_PLAYBACK
used for both cpu_dai and codec_dai in the playback case?
Thanks,
Stephan
next prev parent reply other threads:[~2020-02-17 14:41 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-19 14:19 Sameer Pujar
2020-01-21 17:28 ` Applied "ASoC: soc-pcm: crash in snd_soc_dapm_new_dai" to the asoc tree Mark Brown
2020-01-23 9:55 ` [RFC] ASoC: soc-pcm: crash in snd_soc_dapm_new_dai Sameer Pujar
2020-02-17 14:41 ` Stephan Gerhold [this message]
2020-02-17 15:43 ` [alsa-devel] " Mark Brown
2020-02-17 17:12 ` Stephan Gerhold
2020-02-17 17:19 ` Stephan Gerhold
2020-02-17 17:30 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200217144120.GA243254@gerhold.net \
--to=stephan@gerhold.net \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=spujar@nvidia.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome