From: Ben Pai <Ben_Pai@wistron.com>
To: <robh+dt@kernel.org>, <mark.rutland@arm.com>, <joel@jms.id.au>,
<andrew@aj.id.au>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>
Cc: <wangat@tw.ibm.com>, <Claire_Ku@wistron.com>,
Ben Pai <Ben_Pai@wistron.com>
Subject: [PATCH v1] ARM: dts: mihawk: Change the name of mihawk led
Date: Thu, 20 Feb 2020 13:52:55 +0800 [thread overview]
Message-ID: <20200220055255.22809-1-Ben_Pai@wistron.com> (raw)
1.Change the name of power, fault and rear-id.
2.Remove the two leds.
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
---
arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 17 +++--------------
1 file changed, 3 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
index e55cc454b17f..6c11854b9006 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
@@ -120,35 +120,24 @@
leds {
compatible = "gpio-leds";
- fault {
+ front-fault {
retain-state-shutdown;
default-state = "keep";
gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
};
- power {
+ power-button {
retain-state-shutdown;
default-state = "keep";
gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
};
- rear-id {
+ front-id {
retain-state-shutdown;
default-state = "keep";
gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
};
- rear-g {
- retain-state-shutdown;
- default-state = "keep";
- gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_LOW>;
- };
-
- rear-ok {
- retain-state-shutdown;
- default-state = "keep";
- gpios = <&gpio ASPEED_GPIO(Y, 0) GPIO_ACTIVE_LOW>;
- };
fan0 {
retain-state-shutdown;
--
2.17.1
next reply other threads:[~2020-02-20 5:58 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-20 5:52 Ben Pai [this message]
2020-02-26 10:55 ` Joel Stanley
2020-02-27 6:31 ` Ben_Pai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200220055255.22809-1-Ben_Pai@wistron.com \
--to=ben_pai@wistron.com \
--cc=Claire_Ku@wistron.com \
--cc=andrew@aj.id.au \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=wangat@tw.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®