mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jeremy Linton <jeremy.linton@arm.com>
To: netdev@vger.kernel.org
Cc: opendmb@gmail.com, f.fainelli@gmail.com, davem@davemloft.net,
	bcm-kernel-feedback-list@broadcom.com,
	linux-kernel@vger.kernel.org, wahrenst@gmx.net, andrew@lunn.ch,
	hkallweit1@gmail.com, Jeremy Linton <jeremy.linton@arm.com>
Subject: [PATCH v2 4/6] net: bcmgenet: Initial bcmgenet ACPI support
Date: Mon, 24 Feb 2020 16:54:01 -0600	[thread overview]
Message-ID: <20200224225403.1650656-5-jeremy.linton@arm.com> (raw)
In-Reply-To: <20200224225403.1650656-1-jeremy.linton@arm.com>

The rpi4 is capable of booting in ACPI mode with the latest
edk2-platform commits. As such it would be helpful if the genet
platform device were usable.

To achieve this we add a new MODULE_DEVICE_TABLE, and convert
a few dt specific methods to their generic device_ calls. Until
the next patch, ACPI based machines will fallback on random
mac addresses.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
 .../net/ethernet/broadcom/genet/bcmgenet.c    | 21 ++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index e50a15397e11..179855171918 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -7,6 +7,7 @@
 
 #define pr_fmt(fmt)				"bcmgenet: " fmt
 
+#include <linux/acpi.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/sched.h>
@@ -3466,10 +3467,9 @@ static int bcmgenet_probe(struct platform_device *pdev)
 	const struct bcmgenet_plat_data *pdata;
 	struct bcmgenet_priv *priv;
 	struct net_device *dev;
-	const void *macaddr;
+	const void *macaddr = NULL;
 	unsigned int i;
 	int err = -EIO;
-	const char *phy_mode_str;
 
 	/* Up to GENET_MAX_MQ_CNT + 1 TX queues and RX queues */
 	dev = alloc_etherdev_mqs(sizeof(*priv), GENET_MAX_MQ_CNT + 1,
@@ -3500,7 +3500,7 @@ static int bcmgenet_probe(struct platform_device *pdev)
 
 	if (dn)
 		macaddr = of_get_mac_address(dn);
-	else
+	else if (pd)
 		macaddr = pd->mac_address;
 
 	priv->base = devm_platform_ioremap_resource(pdev, 0);
@@ -3547,8 +3547,9 @@ static int bcmgenet_probe(struct platform_device *pdev)
 
 	priv->dev = dev;
 	priv->pdev = pdev;
-	if (of_id) {
-		pdata = of_id->data;
+
+	pdata = device_get_match_data(&pdev->dev);
+	if (pdata) {
 		priv->version = pdata->version;
 		priv->dma_max_burst_length = pdata->dma_max_burst_length;
 	} else {
@@ -3595,8 +3596,7 @@ static int bcmgenet_probe(struct platform_device *pdev)
 	/* If this is an internal GPHY, power it on now, before UniMAC is
 	 * brought out of reset as absolutely no UniMAC activity is allowed
 	 */
-	if (dn && !of_property_read_string(dn, "phy-mode", &phy_mode_str) &&
-	    !strcasecmp(phy_mode_str, "internal"))
+	if (device_get_phy_mode(&pdev->dev) == PHY_INTERFACE_MODE_INTERNAL)
 		bcmgenet_power_up(priv, GENET_POWER_PASSIVE);
 
 	reset_umac(priv);
@@ -3771,6 +3771,12 @@ static int bcmgenet_suspend(struct device *d)
 
 static SIMPLE_DEV_PM_OPS(bcmgenet_pm_ops, bcmgenet_suspend, bcmgenet_resume);
 
+static const struct acpi_device_id genet_acpi_match[] = {
+	{ "BCM6E4E", (kernel_ulong_t)&bcm2711_plat_data },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, genet_acpi_match);
+
 static struct platform_driver bcmgenet_driver = {
 	.probe	= bcmgenet_probe,
 	.remove	= bcmgenet_remove,
@@ -3779,6 +3785,7 @@ static struct platform_driver bcmgenet_driver = {
 		.name	= "bcmgenet",
 		.of_match_table = bcmgenet_match,
 		.pm	= &bcmgenet_pm_ops,
+		.acpi_match_table = ACPI_PTR(genet_acpi_match),
 	},
 };
 module_platform_driver(bcmgenet_driver);
-- 
2.24.1


  parent reply	other threads:[~2020-02-24 22:54 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-24 22:53 [PATCH v2 0/6] Add ACPI bindings to the genet Jeremy Linton
2020-02-24 22:53 ` [PATCH v2 1/6] mdio_bus: Add generic mdio_find_bus() Jeremy Linton
2020-02-24 22:59   ` Florian Fainelli
2020-02-24 22:53 ` [PATCH v2 2/6] net: bcmgenet: refactor phy mode configuration Jeremy Linton
2020-02-24 22:58   ` Florian Fainelli
2020-02-24 22:54 ` [PATCH v2 3/6] net: bcmgenet: enable automatic phy discovery Jeremy Linton
2020-02-24 22:54 ` Jeremy Linton [this message]
2020-02-24 22:58   ` [PATCH v2 4/6] net: bcmgenet: Initial bcmgenet ACPI support Florian Fainelli
2020-02-24 22:54 ` [PATCH v2 5/6] net: bcmgenet: Fetch MAC address from the adapter Jeremy Linton
2020-02-24 22:54 ` [PATCH v2 6/6] net: bcmgenet: reduce severity of missing clock warnings Jeremy Linton
2020-02-24 23:09 ` [PATCH v2 0/6] Add ACPI bindings to the genet Florian Fainelli
2020-02-24 23:31   ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200224225403.1650656-5-jeremy.linton@arm.com \
    --to=jeremy.linton@arm.com \
    --cc=andrew@lunn.ch \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=opendmb@gmail.com \
    --cc=wahrenst@gmx.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®